ASRock Z690 Phantom Gaming-ITX/TB4 Motherboard User Manual

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock Z690 Phantom Gaming-ITX/TB4 motherboard. Designed for 12th Gen Intel Core Processors, this Mini ITX motherboard offers advanced features and connectivity for high-performance computing.

X'hemm fil-Kaxxa

• Gwida ta 'Installazzjoni Mgħaġġla
• Appoġġ CD
• 2 x Kejbils tad-Data SATA
• 1 x Antenna ASRock WiFi 2.4/5/6 GHz
• 2 x Viti għal Sokits M.2

Karatteristiċi Ewlenin

• Jappoġġja l-Proċessuri Intel Core tat-12-il Ġenerazzjoni (LGA1700)
• 11 Phase SPS Dr.MOS Power Design
• Supports DDR5 6400MHz (OC)
• 1 PCIe 5.0 x16 Slot
• Graphics Output Options: HDMI, DisplayPort, Thunderbolt™ Type-C
• Kodek tal-Awdjo Realtek ALC1220 7.1 CH HD, Nahimic Audio
• 3 SATA3 Ports
• 1 Hyper M.2 (PCIe Gen4 x4) Slot
• 1 Hyper M.2 (PCIe Gen4 x4 & SATA3) Slot
• Thunderbolt™ 4/USB4 Type-C Port
• 1 USB 3.2 Gen2x2 Front Type-C Port
• 4 Rear USB 3.2 Gen2 Type-A Ports
• 3 USB 3.2 Gen1 (1 Rear, 2 Front) Ports
• Killer E3100 2.5G LAN
• Killer AX1675 802.11ax (WiFi 6E) + Bluetooth

Setup

1. CPU Installation (LGA 1700)

Carefully align your 12th Gen Intel Core Processor with the LGA 1700 socket. Ensure the triangular markers on the CPU and socket match. Gently lower the CPU into the socket without applying force. Close the load plate and secure the retention arm.

Immaġni: Minn fuq għal isfel view of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, highlighting the LGA 1700 CPU socket.

2. Installazzjoni tar-RAM (DDR5)

Insert DDR5 memory modules into the DIMM slots. Ensure the module's notch aligns with the slot's key. Press down firmly on both ends of the memory module until the retention clips snap into place. This motherboard supports DDR5 up to 6400MHz (OC).

3. Installazzjoni tal-Ħażna (M.2 u SATA)

This motherboard features two Hyper M.2 slots (PCIe Gen4 x4, one also supporting SATA3) and three SATA3 ports. For M.2 SSDs, remove the M.2 Thermal Guard heatsink, insert the SSD, and secure it with the provided screw. Reattach the heatsink. Connect SATA drives using the included SATA data cables.

Immaġni: Angolata view of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, showing the M.2 slots and heatsinks.

4. PCIe Card Installation

Install your graphics card or other PCIe expansion cards into the PCIe 5.0 x16 slot. Ensure the card is fully seated and secured with the case's retention mechanism.

5. Konnessjoni tal-Periferali u l-Enerġija

Connect all necessary power cables from your power supply to the motherboard (24-pin ATX, 8-pin CPU). Connect your display to the HDMI, DisplayPort, or Thunderbolt Type-C output. Utilize the various USB ports (Thunderbolt 4/USB4 Type-C, USB 3.2 Gen2x2, USB 3.2 Gen2, USB 3.2 Gen1) for peripherals. Connect to your network via the Killer E3100 2.5G LAN port or use the Killer AX1675 WiFi 6E and Bluetooth for wireless connectivity. Install the included WiFi antenna for optimal wireless performance.

Image: Rear I/O panel of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard, showing various ports including USB, LAN, and audio.

Image: ASRock Z690 Phantom Gaming-ITX/TB4 motherboard with the WiFi antenna connected to the rear I/O.

Operazzjoni

Konfigurazzjoni tal-BIOS/UEFI

Upon first boot, access the BIOS/UEFI setup utility by pressing the designated key (usually Del or F2) during startup. The UEFI offers both an "Easy Mode" for basic settings and a "Pro Mode" for advanced configurations. Here you can:

• Ikkonfigura l-ordni tal-ibbutjar.
• Ippermetti XMP profiles for optimal memory performance. Manual tuning may be required for stability at higher speeds.
• Adjust fan curves and monitor system temperatures.
• Manage onboard RGB lighting settings. To prevent RGB lights from staying on after shutdown, navigate to "Advanced" -> "Chipset Config" and disable "Turn on onboard LED in S5".
• If using an All-In-One (AIO) liquid cooler, ensure the pump is connected to the correct header (e.g., W_PUMP) and configured in the BIOS to prevent CPU overheating.

Installazzjoni tas-sewwieq

After installing your operating system, ASRock's driver installer may automatically download and prompt for installation of specific drivers. Ensure all necessary drivers, including chipset, LAN, WiFi, and audio drivers, are installed for full system functionality. These can also be found on the ASRock support websit.

Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura l-lonġevità u l-prestazzjoni ottimali tal-motherboard tiegħek:

• Tneħħija tat-Trab: Periodically clean dust from the motherboard and components using compressed air. Pay attention to heatsinks and fan areas.
• Aġġornamenti tal-BIOS: Iċċekkja l-ASRock website for BIOS updates. Updates can improve stability, add new features, and enhance compatibility. Follow the update instructions carefully.
• Aġġornamenti tas-sewwieq: Keep all drivers updated to ensure compatibility and performance with new software and hardware.
• Monitoraġġ tat-temperatura: Utilize monitoring software to keep track of CPU, chipset, and M.2 SSD temperatures to prevent overheating. The MOSFET heatsinks and M.2 Thermal Guard 3 are designed to assist with cooling.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi, ikkunsidra l-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

• Is-Sistema Mhux Tibbutja:
  • Verify all power connections (24-pin ATX, 8-pin CPU) are secure.
  • Erġa' poġġi l-moduli tar-RAM. Ipprova boot b'RAM stick wieħed biss.
  • Ensure the CPU is correctly seated in the LGA 1700 socket.
  • Clear CMOS (refer to your motherboard's quick installation guide for jumper location or use the CMOS clear button on the rear I/O if available).
• Missing Network/WiFi Drivers: If the operating system does not automatically install network drivers, use the provided support CD or download them from the ASRock website on another device and transfer via USB.
• RGB Lights Stay On After Shutdown: As mentioned in the Operating section, disable "Turn on onboard LED in S5" in the BIOS under "Advanced" -> "Chipset Config".
• Overheating CPU with AIO Cooler: Ensure the AIO pump is connected to the dedicated W_PUMP header and configured correctly in the BIOS to run at full speed.
• SATA Drive Detection Issues: If using multiple M.2 drives, some SATA ports may be disabled. Consult the motherboard manual for specific port sharing details.
• XMP Profile Instabilità: If enabling XMP causes system instability, try manually adjusting memory timings and voltage or selecting a lower XMP profile.

Speċifikazzjonijiet

Vidjows Uffiċjali tal-Prodott

The following videos provide additional information and demonstrations of the ASRock Z690 Phantom Gaming-ITX/TB4 motherboard.

Garanzija u Appoġġ

Għal informazzjoni dettaljata dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għas-sit uffiċjali tal-ASRock. website or the documentation included with your product. ASRock provides resources for driver downloads, BIOS updates, and troubleshooting assistance.