FVTLED WK604

FVTLED Smart Recessed Lighting 6-Inch RGBCW LED Downlight Instruction Manual

Mudell: WK604

Introduzzjoni

This manual provides comprehensive instructions for the FVTLED Smart Recessed Lighting 6-Inch RGBCW LED Downlight. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

FVTLED 4-Pack Smart Recessed Lighting with Remote and Smart Bridge

Image: FVTLED Smart Recessed Lighting 4-pack, including the downlights, remote control, and smart bridge.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

  • 4 x LED Recessed Downlights
  • 1 x Kontroll mill-bogħod
  • 1 x Pont Intelliġenti
  • 1 x Manwal tal-Utent (dan id-dokument)

Speċifikazzjonijiet

KaratteristikaDettall
MudellWK604
Qawwa9 Watts
Isem tal-APPHao Deng
Metodi ta' KonnessjoniBLUETOOTH 4.2
Kulur tad-DawlRGBCW (Red, Green, Blue, Warm White, Cool White)
Temperatura tal-Kulur2700K-6500K
Sokit tad-dawlE26
Ħidma Voltage100-130VAC, 50/60HZ
Numru ta' Lamp ŻibeġR/G/B: 2835-1W*3, WW: 2835-1W*9, CW: 2835-1W*9
Angolu tar-raġġ120°
Temperatura tax-Xogħol-20 sa 45 ℃
Dimensjoni tad-DawlΦ7.28 inch x H3.22 inch (D:185mm, H:82mm)
Mount Hole Size5.90 inch - 6.29 inch (150mm-160mm) for 6 inch fixtures
Luminożità700 lumen
Effiċjenza78 lumens għal kull watt
Metodu ta' KontrollApp, Remot, Vuċi (Alexa, Google Assistant)
Tip ta' InstallazzjoniImmonta bil-flus
MaterjalRam, plastik
Product dimensions and components of FVTLED Smart Recessed Lighting

Image: Detailed product dimensions and key components including PC plastic housing, heat-resistant LED chip, fixed card, E26 lamp holder, and connector.

Setup u Installazzjoni

Reminder: Always turn off the main power supply before beginning any electrical installation to prevent electric shock.

1. Physical Installation of Downlights

  1. Ipprepara t-Toqba tal-Immuntar: Ensure the ceiling hole size is between 5.90 inches and 6.29 inches (150mm-160mm) for a 6-inch fixture.
  2. Install E26 Lamp Kap: Screw the E26 lamp head into the existing lamp holder in your recessed can.
  3. Connect the Downlight: Connect the downlight's connector to the E26 lamp head's connector.
  4. Waħħal id-Downlight: Allinja l-lamp body with the hole. Push the downlight into the recessed can. The spring clips on the side will secure it in place.
Step-by-step installation instructions for FVTLED Smart Recessed Lighting

Image: Visual guide for installing the recessed downlight, showing hole drilling, E26 lamp head installation, connector connection, and final placement.

2. Smart Bridge and App Connection

The Smart Bridge facilitates communication between your mobile app and the downlights, enabling smart control features.

  1. Plug in the Smart Bridge: Insert the Smart Bridge into a power outlet. Ensure it is within range of your Wi-Fi network.
  2. Niżżel l-App: Download the "Hao Deng" app from your smartphone's app store.
  3. Pair the Smart Bridge:
    • Open the "Hao Deng" app.
    • Navigate to the device addition section (usually indicated by a '+' or "Add Device").
    • Select "Smart Bridge" from the options.
    • Follow the on-screen instructions to connect the bridge to your Wi-Fi network. This typically involves pressing a button on the bridge and confirming in the app.
  4. Pair the Downlights:
    • Once the Smart Bridge is connected, the app will guide you to scan for and add the downlights.
    • Ensure the downlights are powered on.
    • The app should detect the lights. Select them to add to your smart home system.

Video: This video demonstrates the easy installation process of the FVTLED Smart Recessed Downlights, including screwing in the E26 base, connecting the light, and securing it. It also shows the process of connecting the remote control and the Smart Bridge to the mobile application for full control.

Istruzzjonijiet Operattivi

1. Kontroll tal-App

The "Hao Deng" mobile application provides comprehensive control over your FVTLED Smart Recessed Lights.

  • Aġġustament tal-Kulur: Select from 16 million colors to create custom scenes and ambiances.
  • Kontroll tal-luminożità: Aġġusta l-luminożità minn 10% sa 100%.
  • Temperatura tal-Kulur: Change the white light from 2700K (warm white) to 6500K (cool white).
  • Modi dinamiċi: Access various pre-set dynamic lighting modes or create your own.
  • Sinkronizzazzjoni tal-Mużika: Lights can change color and rhythm with music played through your device.
  • Funzjoni tal-ħin: Skeda d-dwal biex jixegħlu/jitfu f'ħinijiet speċifiċi.
FVTLED Smart Recessed Lighting controlled by mobile app and remote

Image: Demonstrates control of the smart downlights via a mobile application and a physical remote control, showcasing color selection.

FVTLED Smart Recessed Lighting color temperature and brightness adjustment

Image: Illustrates the adjustable color temperature from 2700K to 6500K and brightness dimming from 0% to 100% for the FVTLED Smart Recessed Lighting.

2. Kontroll mill-bogħod

The included remote control offers direct access to basic lighting functions without needing the app.

  • Qawwa mixgħul/mitfi
  • Aġġustament tal-luminożità
  • Color Selection (pre-set colors)
  • Warm White/Cool White Adjustment

3. Kontroll tal-Vuċi (Alexa u Google Assistant)

After connecting the Smart Bridge, you can integrate your FVTLED lights with Amazon Alexa or Google Assistant for convenient voice commands.

  • Ensure your Smart Bridge is successfully registered and connected to your Wi-Fi network.
  • Enable the "Hao Deng" skill/action in your Alexa or Google Home app.
  • Skopri apparati.
  • Uża kmandi bħal:
    • "Alexa/Hey Google, turn on the living room lights."
    • "Alexa/Hey Google, set the kitchen lights to blue."
    • "Alexa/Hey Google, dim the bedroom lights to 50%."

4. Kontroll tal-Grupp

Organize your lights into groups within the "Hao Deng" app for simultaneous control. Up to 64 Bluetooth mesh devices can be added to a single group.

  • Create groups for different rooms or areas (e.g., "Kitchen," "Bedroom," "Hallway").
  • Adjust all lights in a group simultaneously or control individual lights within a group.
FVTLED Smart Recessed Lighting group control via mobile app

Image: Depicts the group control feature, allowing users to manage multiple lights in different areas of a home using the mobile application.

5. Modalità Mużika

Activate Music Mode in the app to synchronize your lights with audio, creating a dynamic and immersive lighting experience.

FVTLED Smart Recessed Lighting in Music Mode, changing colors with rhythm

Image: Shows the Music Mode feature where the lighting changes in rhythm with music, controlled via the mobile app.

6. Modalità Timer

Set schedules for your lights to automatically turn on or off, enhancing convenience and energy efficiency.

FVTLED Smart Recessed Lighting timer mode setting in mobile app

Image: Displays the timer mode interface in the mobile app, allowing users to schedule lights to turn on and off at specific times.

Manutenzjoni

To ensure the longevity and optimal performance of your FVTLED Smart Recessed Lighting, follow these maintenance guidelines:

  • Tindif: Gently wipe the surface of the downlights with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
  • Mitfi qabel it-Tindif: Always turn off the power to the light fixture at the circuit breaker before cleaning.
  • Kontrolli regolari: Periodically inspect the downlights for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
  • Aġġornamenti tas-Software: Keep the "Hao Deng" app updated to the latest version to ensure compatibility and access to new features and bug fixes.

Issolvi l-problemi

If you encounter issues with your FVTLED Smart Recessed Lighting, refer to the following common troubleshooting steps:

ProblemaKawża PossibbliSoluzzjoni
Id-dawl ma jixgħelx.Bla enerġija, konnessjoni maħlula, bozza difettuża.Check power supply at the circuit breaker. Ensure the E26 lamp head and downlight connector are securely fastened. Verify the light is not in sleep mode or turned off via app/remote.
Cannot connect to the app/Smart Bridge.Incorrect pairing process, Wi-Fi issues, distance from bridge.Ensure the Smart Bridge is powered on and its indicator lights are active. Restart the app and attempt pairing again. Move the smartphone closer to the bridge and lights during setup. Check Wi-Fi signal strength.
Il-kontroll mill-bogħod ma jaħdimx.Battery depleted, not paired, out of range.Replace remote control batteries. Re-pair the remote with the lights following the instructions in the app or manual. Ensure the remote is within effective range of the lights.
Voice control (Alexa/Google Assistant) not responding.Smart Bridge offline, skill/action not enabled, incorrect device name.Verify the Smart Bridge is connected to Wi-Fi and the "Hao Deng" skill/action is enabled in your voice assistant app. Ensure the device names used in voice commands match those configured in the app.

Garanzija u Appoġġ

Specific warranty information for this product is not provided in the available data. Please refer to the product packaging or the manufacturer's official websit għal termini u kundizzjonijiet dettaljati tal-garanzija.

For technical support or further assistance, please contact FVTLED customer service through their official channels.

Dokumenti Relatati - WK604

Preview Istruzzjonijiet għall-Utent tal-Kontrollur LED Mini WiFi FVTLED
Istruzzjonijiet għall-utent għall-FVTLED Mini WiFi LED Controller, li jkopru l-parametri tal-prodott, il-konnessjoni tal-wajer, il-funzjonijiet ewlenin, is-setup tal-Wi-Fi, u r-reset tal-fabbrika.