HART HLBL031

HART 40-Volt Cordless Brushless Turbo Fan Blower Kit HLBL031 Instruction Manual

Model: HLBL031

1. Informazzjoni dwar is-Sigurtà

WARNING: This product produces noise levels that may be harmful to your hearing. Always wear appropriate hearing protection when operating. Be aware of your surroundings and other people nearby to avoid injury from propelled debris. Do not operate near flammable materials or in hazardous environments. Always follow the manufacturer's instructions for safe operation.

  • Always wear eye protection when operating the blower.
  • Żomm lit-tfal u lil dawk li jkunu fil-qrib f'distanza sigura.
  • Kun żgur li l-batterija tkun kompletament iċċarġjata qabel l-użu.
  • Do not operate the blower in wet conditions.
  • Inspect the blower for any damage before each use.

2. Kontenut tal-Pakkett

The HART 40-Volt Cordless Brushless Turbo Fan Blower Kit includes the following items:

  • (1) HART 40-Volt Cordless Brushless Turbo Fan Blower
  • (1) Tubu tal-blower
  • (1) 4.0Ah 40-Volt Lithium-Ion Battery
  • (1) Ċarġer tal-batterija
  • (1) Operator's Manual
HART 40-Volt Blower Kit Contents: Blower, 4.0Ah Lithium-Ion Battery, Charger

Figure 1: Included components of the HART 40-Volt Cordless Brushless Turbo Fan Blower Kit.

3. Setup

3.1 Twaħħil tat-Tubu tal-Blower

  1. Align the blower tube with the outlet of the blower housing.
  2. Push the tube firmly onto the blower until it clicks into place, ensuring a secure connection.

3.2 Iċċarġjar tal-batterija

  1. Connect the battery charger to a standard electrical outlet.
  2. Slide the 4.0Ah 40-Volt Lithium-Ion Battery onto the charger.
  3. Allow the battery to charge completely. The indicator light on the charger will change color (e.g., from red to green) when charging is complete.

3.3 Installazzjoni tal-Batterija

  1. Kun żgur li l-blower huwa mitfi.
  2. Slide the fully charged battery into the battery port on the blower until it locks securely into place.
HART 40-Volt Cordless Brushless Turbo Fan Blower with battery installed

Figure 2: The HART 40-Volt Blower with the battery properly installed.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

  1. To turn on the blower, press and hold the power button located on the handle.
  2. Biex itfi l-blower, itlaq il-buttuna tal-qawwa.

4.2 Aġġustament tas-Settings tal-Veloċità

The blower features a variable speed trigger and a turbo button for customized air output:

  • Trigger tal-Veloċità Varjabbli: Squeeze the trigger to start the blower. The airflow speed increases as you squeeze the trigger further.
  • Modalità Turbo: For enhanced clearing power, press the turbo button. This provides maximum airflow (up to 550 CFM and 125 MPH) for heavy debris.
User operating HART 40-Volt Blower with variable speed trigger

Figure 3: Demonstrating the variable speed trigger for increased control and precision.

4.3 Pariri Ġenerali dwar l-Operazzjoni

  • Start with a lower speed setting for lighter debris and increase as needed.
  • Sweep from side to side, moving debris into piles for easier collection.
  • Avoid directing airflow towards people or pets.
User clearing leaves with HART 40-Volt Blower

Figure 4: The blower effectively removes debris with up to 550 CFM and 125 MPH.

5. Manutenzjoni

5.1 Tindif

  • Skonnettja l-batterija qabel it-tindif.
  • Imsaħ il-barra tal-blower b'adamp drapp.
  • Clear any debris from the air intake and blower tube to ensure optimal performance.

5.2 Kura tal-Batterija

  • Aħżen il-batteriji f'post frisk u niexef 'il bogħod mix-xemx diretta.
  • Taħżinx il-batteriji fi stat skarikat għal perjodi twal.
  • Charge batteries fully before long-term storage.

6 Issolvi l-problemi

If you encounter issues with your HART 40-Volt Blower, refer to the following common solutions:

  • Blower not starting: Ensure the battery is fully charged and properly seated in the blower. Check for any obstructions in the air intake or blower tube.
  • Fluss ta 'arja mnaqqas: Clean the air intake and blower tube to remove any blockages. Ensure the battery is fully charged.
  • Il-batterija mhix qed tiċċarġja: Verify the charger is properly plugged into a working outlet. Ensure the battery is correctly inserted into the charger. If the issue persists, the battery or charger may need replacement.

7. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
BrandHART
Numru tal-MudellHLBL031
Sors tal-EnerġijaMħaddma bil-batterija
Voltage40 Volts
Tip ta 'batterija4.0Ah Lithium-Ion
Kapaċità tal-Fluss tal-Ajru550 pied kubu fil-minuta (CFM)
Veloċità125 Mil fis-Siegħa (MPH)
Tip ta' MuturBrushless
Karatteristiċi SpeċjaliAdjustable Speed, Turbo Mode, Ultra-Quiet Technology
Piż tal-oġġett11.64 liri
MaterjalAzzar illigat, Metall, Plastik

8. Garanzija u Appoġġ

For warranty information, technical support, or to purchase replacement parts, please refer to the official HART product website or contact HART customer service. Keep your purchase receipt for warranty claims.

Dokumenti Relatati - HLBL031

Preview HART HPDD25 20 Volt Brushless Drill/Driver Repair Sheet and Parts List
Detailed repair sheet, parts list, and wiring diagram for the HART HPDD25 20 Volt Brushless Drill/Driver. Includes component identification and part numbers.
Preview Folja tat-Tiswija u Lista tal-Partijiet tal-HART HPSV50 Stick Vac ta' 20 Volt
Folja komprensiva ta' tiswija u lista tal-partijiet għall-HART HPSV50 20 Volt Stick Vac, li tiddettalja l-komponenti u l-informazzjoni dwar is-servizz għall-manutenzjoni.
Preview Folja tat-Tiswija u l-Lista tal-Partijiet tat-Trapan bil-Martell HART HPHD01 ta' 20 Volt
Folja dettaljata tat-tiswija, lista tal-partijiet, u dijagramma tal-wajers għall-HART HPHD01 20 Volt Hammer Drill, inklużi n-numri tal-partijiet u l-informazzjoni dwar l-assemblaġġ.
Preview HART 40V Lithium-Ion Battery Pack User Manual
This manual provides safety instructions, operating procedures, and maintenance guidelines for HART 40V Lithium-Ion Battery Packs (HLBP01, HLBP02, HLBP03). Learn about battery features, charging, cold and hot weather operation, and proper disposal.
Preview HART HPDD25 20V Brushless Drill/Driver Operator's Manual
This operator's manual provides essential safety instructions, operating procedures, and maintenance guidelines for the HART HPDD25 20V Brushless Drill/Driver.
Preview 2021 HART and HyperTough Tool Display Reset Instructions
Comprehensive guide for resetting and updating HART and HyperTough tool displays for the 2021 season, detailing product placement, fixture adjustments, and new display configurations.