1. Introduzzjoni
The ThruNite TC20 V2 is a high-performance handheld LED flashlight designed for various outdoor and emergency applications. It features a CREE XHP70 2nd generation LED, delivering a powerful output of up to 4068 lumens and a beam distance of up to 299 meters. This manual provides detailed instructions for the proper use, setup, and maintenance of your TC20 V2 flashlight.
Image: ThruNite TC20 V2 Flashlight with its included USB-C charging cable.
2. X'hemm fil-Kaxxa
Upon opening your ThruNite TC20 V2 package, you should find the following items:
- ThruNite TC20 V2 Cool White Flashlight x1
- Holster x1
- Spare O-rings x2
- Lanyard x1
- ThruNite Battery x1 (high capacity)
- USB-C Charging Cord x1
- Spare USB Rubber Cover x1
- Spare Side Switch Cap x1
Image: All accessories included with the ThruNite TC20 V2 flashlight.
Unboxing Video
Video: An unboxing demonstration of the ThruNite TC20 V2 flashlight, showing all included components.
3. Setup
Before initial use, please ensure the flashlight is properly assembled and charged.
Battery Installation and Head/Tail Cap Tightening
It is crucial to screw down the light head and tail cap tightly before using or charging the flashlight to ensure proper electrical contact and water resistance.
Image: An arrow indicates the direction to screw down the light head for secure connection.
Iċċarġjar tal-flashlight
The TC20 V2 features a built-in USB-C 2A charging port. Connect the provided USB-C charging cord to the flashlight and a power source. During charging, the indicator light will be RED. Once fully charged, the indicator will turn BLUE. If the indicator flashes purple, it signifies abnormal charging. Only firefly, low, and medium modes are available while charging.
Image: The flashlight connected for charging, illustrating the different colors of the charging indicator light.
Installazzjoni tal-Lanyard
To install the lanyard, thread the thin loop of the lanyard through the small hole on the tailcap of the flashlight. Then, pass the larger part of the lanyard through the thin loop and pull it tight to secure it.
Image: The flashlight being held, and examples of it being carried in its holster.
4. Istruzzjonijiet Operattivi
Ixgħel/itfi
Press the side switch to turn the light on or off.
Bidla fil-Modi
- When the light is on, long-press the side switch to cycle through low, medium, and high brightness modes.
- Shortcut għal Firefly: When the light is off, long-press the side switch to directly access firefly mode (0.3 lumens).
- Double click to activate Turbo mode from any other mode.
- Another double click from Turbo mode will activate Strobe mode.
Image: Visual guide to the flashlight's operational modes via the side switch.
Funzjoni tal-Memorja
The flashlight will turn on in the last mode accessed, with the exception of firefly, turbo, and strobe modes. These special modes do not retain memory.
5. Manutenzjoni
To ensure the longevity and optimal performance of your ThruNite TC20 V2 flashlight, consider the following maintenance tips:
- Regularly clean the threads and O-rings with a clean cloth.
- Lubricate the threads and O-rings with silicone grease periodically to prevent wear and maintain water resistance.
- Keep the charging port clean and free of debris.
- Aħżen il-flashlight f'post frisk u niexef meta ma tkunx qed tużaha għal perjodi twal.
6 Issolvi l-problemi
If you encounter issues with your ThruNite TC20 V2 flashlight, try the following common troubleshooting steps:
- Id-dawl ma jixgħelx: Ensure the battery is fully charged and correctly inserted with the positive (+) end facing the head of the flashlight. Confirm that the head and tail cap are screwed on tightly.
- Intermittent light or flickering: Check for loose connections at the head or tail cap. Clean the battery contacts and threads. Ensure the battery is not damaged.
- Kwistjonijiet tal-iċċarġjar: Verify the USB-C cable is securely connected to both the flashlight and the power source. Try a different USB-C cable or power adapter. Check the charging indicator light for status.
- Luminożità jew ħin ta' tħaddim imnaqqas: The battery may need recharging. Extreme temperatures can affect battery performance.
If problems persist after attempting these steps, please refer to the Warranty & Support section for further assistance.
7. Speċifikazzjonijiet
Detailed technical specifications for the ThruNite TC20 V2 Handheld Flashlight:
| Karatteristika | Deskrizzjoni |
|---|---|
| LED | CREE XHP 70 2nd gen. (lifespan of 20+ years) |
| Timxi fuq | 1 x ThruNite 26650 5000mAh battery |
| Riflettur | Riflettur tal-qoxra tal-larinġ |
| Ħidma Voltage | 2.75 - 4.2 V |
| Output Max | 4068 lumens (Turbo) |
| Distanza Massima tar-Raġġ | 299-il metru |
| L-intensità tar-raġġ tal-quċċata | 22400 cd |
| Reżistenti għall-Impatt | 1.5-il metru |
| Waterproof | IPX-8 Standard (2 meters submersible) |
| Piż | 143g (without battery) / 5 ounces (approx.) |
| Dimensjonijiet | 119mm (length) x 42mm (head diameter) x 33.5mm (tailcap diameter) / 4.69"D x 1.65"W x 1.65"H |
| Iċċarġjar | Max 2A USB-C charging |
| Materjal | Aluminju |
Output Modes & Runtime:
- Turbo: 4068~1722 lumens; 220 secs + 90 mins
- Għoli: 1853 lumens; 122 mins
- Medju: 320 lumens; 9 hrs
- Baxx: 35 lumens; 77 hrs
- Nemusa: 0.3 lumens; 71 days
- Strobe 1475 lumens; 211 mins
Immaġni: Splodiet view of the flashlight showing internal components.
Image: Demonstration of the flashlight's powerful 4068 lumen output in a dark environment.
8. Garanzija u Appoġġ
The ThruNite TC20 V2 Handheld Flashlight comes with a 2-year warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact ThruNite customer service through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.
Għal aktar informazzjoni, żur il- ThruNite Store.
