SCUBAPRO MK19 Evo/A700 Dive Regulator System User Manual

1. Introduzzjoni

This manual provides essential instructions for the safe and proper use, setup, operation, and maintenance of your SCUBAPRO MK19 Evo/A700 Dive Regulator System. Please read this manual thoroughly before using the equipment. Proper understanding and adherence to these instructions are crucial for your safety and the longevity of your regulator system.

The SCUBAPRO MK19 Evo/A700 system combines the MK19 Evo first stage with the A700 second stage, designed for reliable performance in various diving conditions.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Diving with compressed gas is inherently dangerous. Improper use of this equipment can lead to serious injury or death. This regulator system is intended for use by certified divers only. Always dive within the limits of your training and experience.

• Ensure you are properly trained and certified in scuba diving before using this equipment.
• Always perform pre-dive checks on all your equipment before each dive.
• Never attempt to service or repair the regulator yourself beyond the scope described in this manual. Refer to an authorized SCUBAPRO technician for all servicing.
• Regular professional maintenance is essential for the safe operation of your regulator.
• Familiarize yourself with all components and their functions before diving.

3. Prodott Aktarview u Karatteristiċi

The SCUBAPRO MK19 Evo/A700 Dive Regulator System consists of a first stage and a second stage, designed to deliver air efficiently and reliably underwater.

Figure 1: SCUBAPRO MK19 Evo first stage (left) and A700 second stage (right).

MK19 Evo First Stage Karatteristiċi:

• Air-Balanced Diaphragm: Delivers consistent airflow regardless of depth, tank pressure, or breathing rate.
• Dry Ambient Pressure Chamber: Equipped with a double spring for enhanced reliability and resistance to freezing.
• Opposing High Pressure Ports: Two ports allow flexible positioning of the first stage and optimal hose/transmitter layout.
• Swivel Turret with LP Ports: Features four High-Flow Low Pressure (LP) ports and one axial Super High-Flow LP port for diverse hose routing options, suitable for technical diving configurations.

A700 Second Stage Karatteristiċi:

• Metall Casing Construction: Utilizes a larger diaphragm within a compact casing, which contributes to breathing sensitivity.
• Air-Balanced Valve: Provides smooth inhalation effort across varying depths and supply pressures.
• Adjustable Inhalation Effort Knob: Allows for personalized comfort by adjusting breathing resistance.
• Super-Flow Hose: Features an oversized bore to facilitate increased air flow during inhalation.
• Sectional Exhaust Tee and Purge: Designed to assist in efficient exhalation and effective clearing of the second stage.

4. Setup u Assemblea

Before assembly, ensure all components are clean and free from debris. Refer to Figure 2 for visual guidance on preparing for a dive.

Figure 2: A diver preparing equipment, illustrating the context of regulator setup.

1. Attach First Stage to Cylinder Valve:
   • For Yoke (INT) connection: Ensure the O-ring on the cylinder valve is present and in good condition. Place the first stage yoke over the cylinder valve and tighten the screw hand-tight. Do not overtighten.
   • For DIN connection: Screw the first stage directly into the cylinder valve until snug.
2. Qabbad Manek:
   • It-tieni Stage (A700): Connect the Super-Flow hose to one of the LP ports on the swivel turret.
   • Pressure Gauge/Computer Transmitter: Connect to one of the High Pressure (HP) ports. The two opposing HP ports allow for flexible gauge placement.
   • Alternate Air Source (Octopus): Connect to another LP port.
   • BCD Inflator Hose: Connect to an available LP port.
3. Iċċekkja l-Konnessjonijiet: Ensure all hoses are securely fastened. Use the provided 4MM ALLEN KEY (Part No. 43.021.000) if any connections require tightening.
4. Open Cylinder Valve: Slowly open the cylinder valve fully. Listen for any leaks. If leaks are detected, close the valve and re-check connections.

5. Istruzzjonijiet Operattivi

5.1 Verifiki ta' Qabel l-Għadisa

• Verify cylinder pressure on your gauge.
• Breathe from the second stage to ensure proper airflow.
• Press the purge button to check for free-flow and ensure it stops when released.
• Iċċekkja l-konnessjonijiet kollha tal-pajp għal tnixxijiet.
• Test your BCD inflator and alternate air source.

5.2 Adjusting Inhalation Effort (A700 Second Stage)

The A700 second stage features an adjustable inhalation effort knob. Turn the knob clockwise to increase breathing resistance (making it harder to breathe) or counter-clockwise to decrease resistance (making it easier to breathe). Adjust to your preferred comfort level, typically set for minimal resistance during a dive.

5.3 Purge Button Function

The large purge button on the A700 second stage allows you to clear water from the regulator or to free-flow air for specific purposes (e.g., filling a lift bag). Press firmly to activate.

6. Manutenzjoni u Ħażna

6.1 Kura wara l-Għadisa

1. Wara kull għadisa, kun żgur li l-għatu tat-trab ikun imwaħħal sew fuq l-ewwel stage inlet.
2. Rinse the entire regulator system thoroughly with fresh, clean water. While rinsing the second stage, press the purge button intermittently to flush water through the system. Do not press the purge button if the first stage is not pressurized or if the dust cap is not in place, as this can allow water into the first stage.
3. Ħalli r-regolatur jinxef kompletament bl-arja f'żona dellija u ventilata sew, 'il bogħod mix-xemx diretta.

6.2 Ħażna

Store your regulator system in a cool, dry place, away from extreme temperatures, chemicals, and direct sunlight. Avoid kinking hoses during storage.

6.3 Servizz Professjonali

Your SCUBAPRO regulator requires periodic professional servicing by an authorized SCUBAPRO technician. Refer to the detailed service schedule provided with your regulator or consult an authorized dealer. Regular servicing ensures optimal performance and safety.

7 Issolvi l-problemi

This section addresses common issues. For problems not listed here or if solutions do not resolve the issue, contact an authorized SCUBAPRO service center.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Garanzija Limitata

This SCUBAPRO product is covered by a limited warranty. For full details regarding warranty terms, conditions, and duration, please refer to the warranty documentation included with your purchase or contact an authorized SCUBAPRO dealer. The warranty typically covers manufacturing defects under normal use and proper maintenance.

9.2 Appoġġ għall-Klijent

For technical assistance, service inquiries, or to locate an authorized SCUBAPRO dealer, please visit the official SCUBAPRO website or contact their customer service department. Always ensure that any servicing or repairs are performed by certified SCUBAPRO technicians using genuine parts.

Tista' ssib aktar informazzjoni u appoġġ fuq SCUBAPRO Store on Amazon.