SOOMFON USB C to RCA Audio Cable Instruction Manual

1. Introduzzjoni

The SOOMFON USB C to 2RCA Audio Cable (Model SF-AC001) is designed to transmit stereo audio directly from USB Type-C enabled devices such as phones, tablets, and laptops to audio output devices equipped with 2RCA phono ports. This cable simplifies audio connections, allowing users to enjoy high-quality sound on various audio systems without the need for additional audio converters.

Image: SOOMFON USB C to 2 RCA Audio Cable

2. Karatteristiċi tal-prodott

• Direct Audio Transmission: Streams stereo audio from USB-C devices to 2RCA phono port audio output devices.
• Plug and Play: Enables seamless stereo audio transmission for high-quality sound without complex setup.
• Kwalità tal-Ħoss Superjuri: Features a built-in DAC Chip supporting 24bit/96kHz audio output, enhancing signal-to-noise ratio and maintaining original sound fidelity.
• Color-Coded Connectors: Red and white color-marked RCA connectors facilitate quick and easy left-and-right channel hookups.
• Kostruzzjoni Durabbli: Utilizes an Aluminum-Alloy shell for corrosion resistance and a fishnet wire braided exterior for strength and flexibility, designed for a bend lifespan exceeding 25,000 cycles.
• Unidirectional Signal Flow: Designed to transmit signals exclusively from USB-C source devices to RCA jack receiving devices.

3. Istruzzjonijiet ta' Setup

Follow these steps to connect your SOOMFON USB C to RCA Audio Cable:

1. Identifika l-Portijiet: Locate the USB Type-C port on your source device (e.g., smartphone, tablet, laptop) and the 2RCA input ports (typically red for right channel, white for left channel) on your audio receiving device (e.g., amplifier, speaker, TV).
2. Qabbad il-USB-C: Insert the USB-C connector of the SOOMFON cable into the USB Type-C port of your source device.
3. Connect RCA: Connect the red RCA plug to the red RCA input port (Right Channel) on your audio device, and the white RCA plug to the white RCA input port (Left Channel). The RCA connectors are designed with easy grips for secure plugging and unplugging.
4. Ivverifika l-Konnessjoni: Ensure both ends of the cable are securely connected. The cable is plug-and-play, so no additional drivers are typically required.

Image: Universal Compatibility Diagram

Image: Interface Identification

4. Istruzzjonijiet Operattivi

Once the cable is connected as described in the setup section, your USB-C device should automatically recognize the audio output. Follow these general operating guidelines:

• Daqq tal-awdjo: Begin playing audio from your source device (e.g., music app, video player).
• Kontroll tal-Volum: Adjust the volume primarily on your audio receiving device (amplifier, speaker) for optimal sound levels. You may also control the output volume from your source USB-C device.
• Unidirectional Flow: Remember that this cable transmits audio from USB-C to RCA only. It cannot be used to send audio from RCA devices to a USB-C input.

Image: Connecting a USB-C device to a speaker

Image: High-fidelity sound quality with noise reduction

5. Manutenzjoni

To ensure the longevity and optimal performance of your SOOMFON USB C to RCA Audio Cable, follow these maintenance guidelines:

• Ħażna: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles.
• Tindif: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use harsh chemicals or abrasive cleaners.
• Immaniġġjar: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself, to prevent damage to the internal wiring.
• Spezzjoni: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if significant damage is observed.

Image: Internal construction for durability

Image: Cable construction details

6 Issolvi l-problemi

If you encounter issues while using your SOOMFON USB C to RCA Audio Cable, refer to the following common problems and solutions:

• Ebda Ħsejjes tal-Ħsejjes:
  • Ensure both the USB-C connector and the RCA plugs are fully and securely inserted into their respective ports.
  • Verify that the correct input source is selected on your audio receiving device (e.g., AUX, Line In).
  • Check the volume levels on both your source device and the audio receiving device. Increase volume gradually.
  • Confirm that your USB-C source device is playing audio.
  • Remember the cable is unidirectional: USB-C to RCA. It will not work if connected in reverse.
• Livell Baxx tal-Awdjo:
  • Increase the volume on both your source device and the audio receiving device.
  • Some USB-C devices may have varying audio output levels. Ensure your device's audio settings are optimized.
  • Test with another audio source or receiving device if possible to isolate the issue.
• Ħoss Mgħawġ:
  • Ensure all connections are firm and free from debris.
  • Reduce the volume on your source device if the audio is clipping or overdriven.
  • Test the cable with different audio files or streaming services to rule out source material issues.
• Cable Not Recognized by Device:
  • Try connecting the cable to a different USB-C port on your device, if available.
  • Ibda mill-ġdid it-tagħmir tas-sors tiegħek.
  • Kun żgur li s-sistema operattiva tat-tagħmir tiegħek hija aġġornata.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information or technical support regarding your SOOMFON USB C to RCA Audio Cable, please refer to the product packaging or contact SOOMFON customer service directly. Contact details can typically be found on the official SOOMFON webis-sit jew permezz tal-pjattaforma tax-xiri tiegħek.