1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance. This camera is designed for outdoor security surveillance, offering high-resolution imaging and infrared capabilities for reliable monitoring.
Image 1.1: Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera overview.
2. Informazzjoni dwar is-Sigurtà
- Sors tal-Enerġija: Use only the specified AC/DC power adapter. Ensure the power supply is stable and meets the camera's requirements (3.5 watts).
- Ambjent ta' Installazzjoni: This camera is rated for outdoor use (IP9380). Avoid installing in locations with extreme temperatures, high humidity, or corrosive substances beyond its operating specifications.
- Immaniġġjar: Do not drop or subject the camera to severe shock. Avoid touching the lens directly.
- Żarmar: Tippruvax tiżżarma jew timmodifika l-kamera. Dan jista' jannulla l-garanzija u jikkawża ħsara.
- Kejbil: Ensure all cables are properly secured and protected from environmental damage or tampering.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera
- Mounting Kit (screws, wall anchors)
- Gwida ta 'Installazzjoni Mgħaġġla
- Waterproof Connector for Ethernet Cable
4. Setup
4.1. Physical Installation and Mounting
The Vivotek IB9380-H camera is designed for wall mount installation. Choose a suitable location that provides the desired field of view u jkun qrib ħafna ta' konnessjonijiet tal-enerġija u tan-netwerk.
- Ipprepara l-Wiċċ tal-Immuntar: Mark the drilling points on the wall using the mounting template (if provided) or by holding the camera's base against the surface.
- Drill toqob: Drill pilot holes at the marked positions. Insert wall anchors if mounting on drywall or masonry.
- Sikura l-Kamera: Attach the camera's mounting base to the wall using the provided screws. Ensure it is firmly secured.
- Aġġusta Angolu: Loosen the adjustment screws on the camera body to set the desired viewing angle. Tighten the screws once the angle is satisfactory.
Image 4.1: Camera dimensions and mounting diagram for installation planning.
4.2. Konnessjoni tal-kejbil
Connect the necessary cables to the camera:
- Kejbil Ethernet: Connect a standard Ethernet cable (RJ45) to the camera's network port. Use the waterproof connector to protect the connection if exposed to weather.
- Cable tal-Enerġija: Connect the power adapter to the camera's power input. Ensure the connection is secure.
Image 4.2: Close-up of an Ethernet cable connector, similar to what is used for the camera's network connection.
4.3. L-Ewwel Tixgħil
Once all cables are connected, plug the power adapter into an electrical outlet. The camera will power on and initiate its startup sequence. Observe any indicator lights for status.
5. Istruzzjonijiet Operattivi
5.1. Network Configuration and Access
The Vivotek IB9380-H supports Wi-Fi connectivity. For initial setup, it is recommended to connect via Ethernet to configure network settings.
- Skopri l-Kamera: Use the Vivotek IP Search utility or your network router's client list to find the camera's assigned IP address.
- Aċċess Web Interface: Iftaħ a web browser and enter the camera's IP address. Log in using the default credentials (refer to the Quick Installation Guide for details).
- Configure Wi-Fi: Navigate to the network settings within the web interface. Select your Wi-Fi network, enter the password, and save the settings. Once configured, you may disconnect the Ethernet cable if desired.
5.2. Ħaj View u Reġistrazzjoni
After network setup, you can access the camera's live feed and configure recording options.
- Live View: Mill- web interface or a compatible mobile application, select the camera to view l-għalf dirett tiegħu.
- Setup tar-Reġistrazzjoni: Configure recording schedules, continuous recording, or event-triggered recording (e.g., motion detection). Recordings can be stored on a network video recorder (NVR) or a local storage device if supported.
Immaġni 5.1: Eż.ample of a tablet displaying multiple camera feeds, illustrating remote monitoring capabilities.
5.3. Motion Detection Setup
The camera supports motion-only alerts.
- Access Alert Settings: In the camera's web interface, navigate to the event or alert settings section.
- Configure Motion Detection: Enable motion detection and define the detection zones and sensitivity levels.
- Set Actions: Specify actions to be taken upon motion detection, such as recording, sending email notifications, or triggering alarms.
5.4. Viżjoni bil-lejl
The camera features IR (Infrared) and Night Color low light technology for clear imaging in various lighting conditions. These features typically activate automatically based on ambient light levels.
6. Manutenzjoni
- Tindif tal-Lenti: Gently wipe the camera lens with a soft, clean cloth. For stubborn dirt, use a lens cleaning solution designed for optical surfaces. Do not use abrasive cleaners.
- Aġġornamenti tal-Firmware: Periodically check the Vivotek websit għal aġġornamenti tal-firmware. Iż-żamma tal-firmware aġġornat tiżgura prestazzjoni ottimali, sigurtà, u aċċess għal karatteristiċi ġodda.
- Kontroll Ambjentali: Regularly inspect the camera and its mounting for any signs of wear, damage, or loose connections, especially after severe weather conditions.
- Ċiklu tal-Enerġija: If the camera experiences minor issues, try power cycling it by disconnecting and reconnecting the power supply.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda Qawwa | Power adapter unplugged or faulty; power outlet issue. | Check power connections. Test the outlet with another device. Try a different power adapter if available. |
| Ebda Feed tal-Vidjo | Network connection issue; incorrect IP address; camera not configured. | Verify network cable connection or Wi-Fi settings. Confirm camera's IP address. Ensure camera is properly configured in your viewsoftwer ing. |
| Kwalità Fqira tal-Immaġni | Dirty lens; low light conditions; incorrect resolution settings. | Clean the camera lens. Ensure sufficient lighting or verify night vision is active. Check video resolution settings in the camera's interface. |
| Sejbien tal-Mozzjoni Mhux Jaħdem | Motion detection disabled; incorrect sensitivity; detection zones not set. | Enable motion detection in settings. Adjust sensitivity and define detection zones. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | IB9380-H |
| Riżoluzzjoni Għadha Effettiva | 5 MP |
| Riżoluzzjoni tal-Qbid tal-Vidjo | 1080p |
| Frame Rata | 20 fps |
| Teknoloġija tad-Dawl Baxx | Kulur bil-lejl |
| Fattur tal-Formola | Bullet |
| Użu fuq ġewwa/barra | Barra |
| Tip ta 'Immuntar | Mount Wall |
| Komunikazzjoni bla fili | Wi-Fi |
| Protokoll tal-Konnettività | Wi-Fi |
| Sors tal-Enerġija | AC/DC |
| Wattage | 3.5 watt |
| Tip ta 'Twissija | Mozzjoni Biss |
| Metodu ta' Kontroll | Remote |
| Dimensjonijiet (L x W x H) | 3.59 x 3.59 x 6.96 pulzieri |
| Klassifikazzjoni tal-Protezzjoni Internazzjonali | IP9380 |
| UPC | 655255870887, 681541834035 |
9. Informazzjoni dwar Garanzija
This Vivotek product is covered by a manufacturer's limited warranty. Please refer to the warranty card included in your package or visit the official Vivotek website for detailed terms and conditions regarding warranty coverage, duration, and claims procedures. Keep your proof of purchase for warranty service.
10. Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Vivotek customer support. You can typically find contact information (phone, email, support portal) on the official Vivotek webis-sit jew fid-dokumentazzjoni pprovduta mal-prodott tiegħek.
Riżorsi onlajn: www.vivotek.com
