Manwal tal-Utent tat-Tester tal-Kejbils tan-Netwerk Multifunzjonali Noyafa NF-810

1. Introduzzjoni

The Noyafa NF-810 is a versatile network cable tester designed for professionals and enthusiasts alike. It provides comprehensive functionality for testing various cable types, including LAN and STP cables, and offers advanced features such as PoE detection, wiremapping, and telephone line status detection. This manual provides detailed instructions for the safe and effective use of your NF-810 device.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• Tużax l-apparat jekk jidher bil-ħsara.
• Ensure batteries are inserted correctly according to polarity markings.
• Avoid testing live circuits with voltages exceeding 60V to prevent damage to the PoE tester function and potential injury.
• Żomm l-apparat 'il bogħod mill-ilma u likwidi oħra.
• Tippruvax tiżżarma jew timmodifika l-apparat. Irreferi kull servizz lil persunal kwalifikat.
• Uża biss aċċessorji u aċċessorji speċifikati.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Noyafa NF-810 Emitter Unit
• Noyafa NF-810 Receiver Unit
• Kejbil RJ45
• Kejbil RJ11
• Cable tal-Klip tal-Alligatur
• Borża tal-Ġarr
• Manwal għall-Utent

Figure 3.1: Noyafa NF-810 Tester and included accessories.

4. Prodott Aktarview

The NF-810 consists of two main units: the Emitter and the Receiver. Familiarize yourself with the components of each unit.

Figure 4.1: Labeled diagram of the NF-810 Emitter and Receiver units.

Emitter Unit

• Port RJ45: For connecting Ethernet cables.
• Port RJ11: For connecting telephone lines.
• Dial tal-Funzjoni: Selects between CONT (Continuity), SCAN, OFF, TONE, and SHORT modes.
• Wiremap Indicators (1-8, G): LEDs to display wire status.

Unità Riċevitur

• Sonda: For tracing cables and detecting signals.
• Dawl LED: Idawwal żoni tax-xogħol mudlama.
• Power/SCAN Indicator: Shows power status and scan activity.
• Sensitivity Knob: Adjusts the sensitivity of the receiver.
• Port tal-Earphone: For connecting headphones for clearer tone detection.
• Buttuna LED: Activates the LED light.
• Wiremap Indicators (1-8, G): LEDs to display wire status (Mid-span, End-span).
• Port RJ45: For connecting Ethernet cables for wiremap testing.

5. Setup

5.1 Installazzjoni tal-batterija

The NF-810 requires 1 Lithium Metal battery (9V laminated battery) for operation. Ensure the battery is installed correctly in both the Emitter and Receiver units.

1. Locate the battery compartment cover on the back of each unit.
2. Open the cover by sliding or unscrewing it.
3. Insert the 9V battery, observing the correct polarity (+/-) markings.
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

6. Istruzzjonijiet Operattivi

6.1 Cable Measurement (Wiremapping)

This function detects breaks, shorts, crossovers, and shielding issues in LAN (RJ45) and telephone (RJ11) cables.

1. Connect one end of the cable to the RJ45 or RJ11 port on the Emitter unit.
2. Connect the other end of the cable to the corresponding RJ45 port on the Receiver unit.
3. Turn the Emitter's function dial to the 'CONT' position.
4. Observe the wiremap indicators (LEDs 1-8 and G) on both the Emitter and Receiver.
5. Normal Connection: LEDs on both units will light up sequentially from 1 to 8, then G (for shielded cables).
6. Ċirkwit Miftuħ: If a specific LED does not light up, that wire is open.
7. Short Circuit: If two or more LEDs light up simultaneously, a short circuit exists between those wires.
8. crossover: If the sequence of LEDs is incorrect (e.g., Emitter 1 lights up, but Receiver 2 lights up), a crossover is detected.

Figure 6.1: Performing a wiremap test with the NF-810.

6.2 Wire Tracing (Scanning/Tone Function)

This function helps locate and identify specific cables within a bundle or wall.

1. Connect one end of the target cable to the RJ45 or RJ11 port on the Emitter unit. For non-RJ cables, use the alligator clip cable to connect to the wire pair.
2. Turn the Emitter's function dial to the 'SCAN' or 'TONE' position. The Emitter will generate an audible tone.
3. Turn on the Receiver unit and adjust the sensitivity knob to a suitable level.
4. Use the Receiver's probe to scan the cables or wires you suspect are the target.
5. The Receiver will emit a louder sound and/or the yellow-green signal indicator will illuminate more brightly when it detects the tone from the target cable.

Figure 6.2: Using the Receiver for wire tracing.

6.3 PoE Tester Function

The NF-810 can detect Power over Ethernet (PoE) presence, identify PoE switch types, and measure the number of PoE power supply cores.

1. Connect the Ethernet cable from the PoE source (e.g., PoE switch) to the RJ45 port on the Receiver unit.
2. The Receiver will automatically detect PoE presence.
3. Observe the LEDs on the Receiver unit. They will indicate the PoE power supply cores (Mid-span or End-span) and potentially the voltage.
4. Attenzjoni: The device is designed to withstand voltages up to 60V. Do not test circuits exceeding this voltage biex jipprevjenu ħsara.

Figure 6.3: Testing PoE functionality.

6.4 Telephone Line Detection

This feature allows for detecting the polarity, on/off status, and standby status (idle, ringing, talk) of telephone lines.

1. Connect the telephone line to the RJ11 port on the Emitter unit.
2. Turn the Emitter's function dial to the 'TEL' position (if available, or use 'CONT' and interpret the LEDs).
3. The LEDs will indicate the line status:
   • Inattiv: Specific LEDs will light up, indicating a normal standby line.
   • Tisfir: LEDs may flash or change pattern during an incoming call.
   • Tkellem: LEDs will indicate the active talk state and polarity.

Figure 6.4: Detecting telephone line status.

6.5 Dawl LED

The Receiver unit is equipped with an LED light to assist in dark environments.

• Press the 'LED' button on the Receiver unit to turn the light on or off.

Figure 6.5: Using the LED light on the Receiver unit.

7. Manutenzjoni

Proper maintenance ensures the longevity and accuracy of your NF-810 tester.

• Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Ħażna: Aħżen l-apparat f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Kura tal-batterija: Neħħi l-batteriji jekk l-apparat ma jkunx se jintuża għal perjodu estiż biex tevita t-tnixxija.
• Protezzjoni tas-Sonda: Ensure the Receiver's probe is not bent or damaged during storage or transport.

8 Issolvi l-problemi

If you encounter issues with your NF-810, refer to the following common problems and solutions:

9. Speċifikazzjonijiet

• Mudell: NF-810
• Applicable Network Cable: CAT5, CAT6 (RJ45), Telephone Cable (RJ11)
• Tip ta' Interface: RJ11, RJ45
• Max Withstand Voltage: 60V
• Wiremapping Distance: Sa 3280 pied (1000m)
• Sors tal-Enerġija: 1 x 9V Laminated Battery (per unit)
• Dimensions (Emitter): Madwar 125mm x 45mm x 27mm
• Dimensjonijiet (Riċevitur): Madwar 201mm x 45mm x 28mm
• Piż tal-oġġett: 0.41 Kilogrammi (total)
• Kulur: Green, Yellow (device accents)

Figure 9.1: NF-810 Emitter and Receiver dimensions.

10. Garanzija u Appoġġ

NOYAFA is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions regarding your NF-810 network cable tester, please contact NOYAFA customer support. Our support team is available to assist you with product inquiries, troubleshooting, and technical assistance.

For assistance, please refer to the contact information provided with your purchase or visit the official NOYAFA websit.