Manwal tal-Utent tas-Sistema tal-Mikrofonu Wireless SYNCO P1SL

Introduzzjoni

Thank you for choosing the SYNCO P1SL Wireless Microphone System. This manual provides detailed instructions for the setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Kontenut tal-Pakkett

• SYNCO P1SL Transmitter (TX)
• SYNCO P1SL Receiver (RX) with Lightning Connector
• Kawża tal-Iċċarġjar
• Mic Windshield x 1
• Charging cable x 1 (USB-C)

Prodott Overview

The SYNCO P1SL is a compact wireless microphone system designed for mobile content creation, live streaming, vlogging, and interviews. It features 2.4GHz wireless transmission, one-touch noise cancellation, and a portable charging case.

Figure 1: SYNCO P1SL Wireless Microphone System components and typical usage.

Komponenti:

• Trasmettitur (TX): L-unità tal-mikrofonu li tintlibes mill-ispiker. Din taqbad l-awdjo u tittrażmettih mingħajr fili.
• Riċevitur (RX): The unit that plugs into your iPhone or iPad. It receives audio from the TX.
• Każ tal-Iċċarġjar: Stores and charges both the TX and RX units.

Figure 2: Compact and lightweight design of the SYNCO P1SL.

Gwida ta' Setup

1. Iċċarġjar tal-Apparat

Before initial use, ensure both the Transmitter (TX), Receiver (RX), and the Charging Case are fully charged. Use the provided USB-C charging cable to charge the case. The TX and RX units charge automatically when placed inside the charging case.

• A 10-minute charge provides approximately 45 minutes of use for the TX/RX.
• A full charge of the TX/RX offers up to 5 hours of recording time.
• The charging case provides two additional full charges, extending total usage time to approximately 15 hours.

Figure 3: Charging the SYNCO P1SL system and battery life indicators.

2. It-tqabbil tat-Trasmettitur u r-Riċevitur

The SYNCO P1SL system is designed for automatic pairing. Simply extract the TX and RX units from the charging case. They will automatically attempt to pair with each other. If manual pairing is required:

1. Place both the TX and RX units into the charging case.
2. Agħlaq il-każ tal-iċċarġjar.
3. Open the charging case and extract the units. They should automatically pair.
4. If pairing does not occur, press and hold the pairing button on the charging case for 3 seconds.

Figure 4: Automatic pairing for seamless recording.

3. Konnessjoni mal-Apparat Tiegħek

The RX unit is equipped with a Lightning connector, making it compatible with iPhones and iPads.

1. Plug the RX unit directly into the Lightning port of your iPhone or iPad.
2. Ensure the connection is secure. Your device should recognize the external microphone automatically.
3. The system is plug-and-play; no additional apps or drivers are typically required.

Figure 5: Connecting the receiver to a compatible device.

Istruzzjonijiet Operattivi

1. Power On/Off

The TX and RX units power on automatically when removed from the charging case and power off when returned to the case.

2. Kanċellazzjoni tal-Istorbju

The SYNCO P1SL features one-touch noise reduction technology to minimize background noise and enhance voice clarity.

• Locate the noise cancellation button on the TX unit.
• Press the button once to activate or deactivate noise cancellation.
• The indicator lights on the TX will change to confirm the status.

Figure 6: Activating one-click noise cancellation.

3. Kontroll tal-Volum

The microphone offers five levels of volume adjustment to suit different recording environments and voice types.

• Use the dedicated volume control button on the TX unit to cycle through the five volume levels.
• Adjust the volume to achieve optimal audio input without distortion.

Figure 7: Adjusting microphone volume levels.

4. Monitoraġġ f'Ħin Reali

The RX unit features a Type-C port that allows for real-time audio monitoring and simultaneous phone charging.

• Connect headphones to the Type-C port on the RX unit to monitor audio during recording.
• This port can also be used to charge your phone while the RX is connected, ensuring extended recording sessions.

Figure 8: Real-time monitoring via indicator lights.

Figure 9: Charging your device while streaming.

5. Dwal Indikaturi

The TX, RX, and charging case feature dynamic light strips that indicate battery status, charging status, vocal effect, and pairing status. Refer to the quick start guide for specific light patterns and their meanings.

6. Using the Mic Windshield

Attach the provided mic windshield to the TX unit when recording outdoors or in windy conditions to reduce unwanted wind noise and improve audio clarity.

Figure 10: Enhanced noise isolation with mic windshield.

7. Awdjo ta' Fedeltà Għolja

The SYNCO P1SL delivers high-fidelity audio with a 48KHz sample rate and 24-bit depth, ensuring clear and detailed sound capture.

Figure 11: High-fidelity 48KHz 24-bit audio quality.

Figure 12: Delivering crystal clear sound with optimal frequency response.

8. Omnidirectional Pickup

Equipped with a 6mm high-sensitivity condenser mic, the P1SL offers 360° omnidirectional sound pickup, minimizing voice distortion and signal loss.

Figure 13: Omnidirectional sound pickup for clear audio.

9. Firxa ta' Trażmissjoni

The system provides a stable 2.4 GHz wireless transmission, allowing for recording distances of up to 492ft (150m) in obstacle-free environments.

Figure 14: Extended wireless transmission range of 492ft/150m.

10. Multi-Scene Application

The SYNCO P1SL is versatile and suitable for various applications, including vlogging, podcasts, YouTube videos, live streaming, interviews, meetings, and online teaching.

Figure 15: Designed for multi-scene application.

Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the microphone units and charging case. Avoid using liquids or abrasive cleaners.
• Ħażna: Aħżen is-sistema fil-kaxxa tal-iċċarġjar tagħha f'post frisk u niexef meta ma tkunx qed tużaha.
• Kura tal-batterija: To prolong battery life, avoid fully discharging the units frequently. Charge them regularly, even if not in constant use.
• Immaniġġjar: Handle the units with care to prevent damage from drops or impacts.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

SYNCO products are designed for reliability and performance. For warranty information and technical support, please visit the official SYNCO webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta’ garanzija.

Riżorsi onlajn:

• SYNCO Brand Store on Amazon
• Gwida Uffiċjali għall-Utent (PDF)

Informazzjoni dwar is-Sigurtà

• Żarmax jew timmodifikax l-apparat.
• Żomm l-apparat 'il bogħod mill-ilma, min-nar, u minn temperaturi għoljin.
• Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.
• Armi l-batteriji u l-komponenti elettroniċi b'mod responsabbli skont ir-regolamenti lokali.