Whirlpool WP3149404 Electric Range Surface Burner Control Switch Instruction Manual

1. Prodott Aktarview

This manual provides instructions for the Whirlpool WP3149404 Electric Range Surface Burner Control Switch. This genuine OEM replacement part is designed to operate the small surface element of your electric range, controlling its on/off function and heat intensity. Proper installation and understanding of its function are essential for safe and effective use.

Image 1: Whirlpool WP3149404 Electric Range Surface Burner Control Switch.

2. Informazzjoni Importanti dwar is-Sigurtà

TWISSIJA: Before attempting any installation or repair, always disconnect power to the appliance by unplugging it or shutting off the house circuit breaker. Failure to do so can result in serious injury or death from electrical shock.

• Kun żgur li l-apparat ikun berred kompletament qabel tibda x-xogħol.
• Ilbes tagħmir protettiv personali xieraq, bħal ingwanti u nuċċalijiet tas-sigurtà.
• If you are unsure about any step of the repair process, consult a qualified technician.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tax-xogħol.

3. Features and Compatibility

The WP3149404 is a genuine OEM (Original Equipment Manufacturer) part from Whirlpool, designed to meet specific engineering standards for your appliance.

Karatteristiċi ewlenin:

• Parti Ġenwina tal-OEM: Manufactured by Whirlpool to ensure quality and compatibility with your appliance.
• Funzjoni: Controls the small surface element, regulating heat intensity and on/off function.

Numri ta' Parti ta' Sostituzzjoni:

This part replaces the following numbers:

• W10295576
• 311856
• 311857
• 310179
• 311847
• 314144
• 3148951
• 3149404

Appliances kompatibbli:

The WP3149404 is compatible with multiple Whirlpool electric range models, including but not limited to:

• WFE515S0ES
• WFE320M0ES
• WFC150M0EW
• WFE320M0JS
• WFC150M0EB

Immaġni 2: Dettaljata view of the WP3149404 control switch, showing terminals and shaft.

4. Istruzzjonijiet ta 'installazzjoni

Replacing the surface burner control switch requires basic repair experience and some disassembly of the electric range. Always prioritize safety by following the steps below.

Għodod Meħtieġa:

• Multi-screwdriver
• Tnalji tal-imnieħer tal-labra
• Standard pliers
• Hacksaw (potentially needed for shaft adjustment)

Gwida pass pass:

1. Skonnettja l-Enerġija: Before starting, unplug the electric range from the wall outlet or turn off the corresponding circuit breaker at your home's electrical panel. Verify power is off.
2. Aċċessa l-Control Panel: Depending on your range model, you may need to remove the back panel or lift the cooktop to access the control switches. Refer to your specific range's service manual for detailed access instructions.
3. Identifika s-Swiċċ Difettuż: Locate the surface burner control switch that needs replacement. Note the wiring configuration before disconnecting. Taking a photo can be helpful.
4. Skonnettja l-Wiring: Carefully disconnect all wires attached to the old switch using needle-nose pliers if necessary.
5. Neħħi s-Swiċċ il-Qadim: Unscrew or unclip the old switch from its mounting bracket.
6. Ipprepara Swiċċ Ġdid: The shaft of the new switch may be longer than the original. If so, locate the sectioned grooves on the shaft. Use a hacksaw to carefully cut the shaft to the required length, matching the original switch's shaft length.
7. Installa Swiċċ Ġdid: Mount the new WP3149404 switch into the control panel, ensuring it is securely fastened.
8. Erġa' qabbad il-wajers: Reattach the wires to the new switch, matching the configuration noted in Step 3. Ensure all connections are secure.
9. Erġa' arma l-Appliance: Carefully reassemble the control panel and any other parts removed during disassembly.
10. Irrestawra l-Enerġija: Plug the electric range back in or turn on the circuit breaker.
11. Funzjonalità tat-Test: Test the new switch to ensure the burner operates correctly and regulates heat as expected.

5. Operazzjoni

The WP3149404 control switch functions identically to the original part it replaces. It allows you to turn the small surface element of your electric range on and off, and to adjust its heat output from low to high settings. Rotate the control knob to select the desired heat level for cooking.

6. Manutenzjoni

This control switch is a sealed unit and does not require routine maintenance. If the control knob becomes loose or difficult to turn, inspect its connection to the switch shaft. Ensure the area around the control panel is kept clean and free from food debris or liquid spills to prevent damage to electrical components.

7 Issolvi l-problemi

If you experience issues after replacing the control switch, refer to the following common problems and solutions:

Jekk il-passi għas-soluzzjoni tal-problemi ma jsolvux il-problema, ikkuntattja l-appoġġ għall-klijenti ta' Whirlpool jew tekniku tal-apparat iċċertifikat.

8. Speċifikazzjonijiet

• Numru tal-Parti: WP3149404
• Manifattur: Whirlpool
• Piż tal-oġġett: 2.89 uqija
• Dimensjonijiet tal-Prodott: 2.5 x 2.25 x 2 pulzieri
• Kwantità tal-Pakkett tal-Oġġett: 1
• Komponenti Inklużi: Whirlpool WP3149404 Genuine OEM Electric Range Surface Burner Control Switch Replacement Part
• Batteriji Meħtieġa: Nru
• L-Ewwel Data Disponibbli: 23 ta’ Novembru, 2021

9. Garanzija u Appoġġ

This Whirlpool Genuine OEM part comes with a garanzija ta' sena mill-manifattur. For warranty claims or technical support, please contact Whirlpool customer service or visit the official Whirlpool website. Ensure you have your appliance model number and the part number (WP3149404) available when contacting support.

For additional information and to purchase genuine parts, visit the Ħanut Whirlpool fuq Amazon.