Intex Krystal Clear SX925 Sand Filter Pump User Manual

Introduzzjoni

This manual provides essential information for the safe operation, installation, and maintenance of your Intex Krystal Clear SX925 Sand Filter Pump. Sand filters are recognized for their efficiency in maintaining clear and sparkling pool water. This model, 26642/SX925, is designed for optimal filtration performance in various pool types.

The unit features a circulation capacity of 2,000 liters per hour (L/h) and a pump capacity of 3,500 L/h. It operates on 220-240V/90W and is suitable for pools with a water volume of approximately 16,805 liters. It is compatible with standard Intex hose connections and can be used with saltwater pools (up to 3 g/l salt content) and water temperatures up to 35°C.

Informazzjoni dwar is-Sigurtà

Always read and follow all instructions carefully before installing, operating, or maintaining this product. Failure to do so can result in serious injury or property damage.

Sigurtà Elettrika: Ensure the power outlet is properly grounded and protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device (RCD). Do not operate the pump if the power cord or plug is damaged.
Ilma u Elettriku: Never operate the pump when people are in the pool. Keep all electrical connections dry and away from water.
Sigurtà tat-Tfal: Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom. It-tfal għandhom ikunu sorveljati biex jiżguraw li ma jilagħbux bl-apparat.
Manutenzjoni: Skonnettja l-provvista tal-enerġija qabel ma twettaq kwalunkwe manutenzjoni jew tindif.
Installazzjoni: Install the pump on a firm, level surface. Ensure proper ventilation around the pump.
Kimiċi: Handle pool chemicals with care and follow manufacturer's instructions.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja biex tiżgura li l-komponenti kollha huma preżenti u bla ħsara:

Intex Krystal Clear SX925 Sand Filter Pump Unit
Tank tal-Filtru
Mutur tal-Pompa
Valv b'6 Portijiet Multipli
Gauge tal-Pressjoni
Pajpijiet u Clamps
Plunger Valves (if applicable for your pool model)
Manwal ta' Istruzzjoni

Intex Krystal Clear SX925 Sand Filter Pump main unit

Image: The main Intex Krystal Clear SX925 Sand Filter Pump unit, showing the filter tank, pump motor, and multi-port valve.

Setup u Installazzjoni

Follow these steps for proper assembly and installation of your sand filter pump.

Positioning the Pump: Place the sand filter pump on a solid, level surface, at least 2 feet (0.6 meters) away from the pool. Ensure the location is dry, well-ventilated, and protected from direct sunlight and rain.
Assembling the Tank and Pump:
- Attach the pump motor to the filter tank base.
- Ensure all connections are secure and sealed with O-rings where necessary.
Immaġni: Close-up views of the multi-port valve, sand tank, and pump motor components, highlighting their integration.
Żieda tal-Media tal-Filtru:
- Neħħi l-valv b'ħafna portijiet minn fuq it-tank.
- Place the standpipe and laterals assembly inside the tank.
- Carefully pour the recommended amount of filter sand (silica sand No. 20 or glass filter media 0.45/0.85mm) into the tank. Ensure the standpipe remains centered.
- Replace the multi-port valve, ensuring it's securely fastened to the tank.
Image: This image illustrates the pump's specifications, including flow rates (3500 L/h pump, 2100 L/h filtration), motor power (90W/0.125 hp), and recommended filter media (silica sand No. 20 or glass sand 0.45/0.85mm).
Manek tal-Konnessjoni:
- Connect the pump's inlet to the pool's outlet (skimmer/main drain).
- Connect the pump's outlet to the pool's inlet (return jet).
- Connect the waste port of the multi-port valve to a suitable drainage area.
- Secure all hose connections with clamps biex jipprevjenu tnixxijiet.
Ipprajmjar il-Pompa: Before starting, ensure the pump is primed by filling the pump housing with water. This prevents airlocks and ensures proper operation.

Video: A visual guide demonstrating the assembly and setup process of the Intex Krystal Clear Sand Filter Pump, including component identification and connection steps.

Operating the Sand Filter Pump

The multi-port valve allows for different operating modes:

Iffiltra: Normal filtering mode. Water flows through the sand and returns to the pool.
Backwash: Cleans the sand filter by reversing water flow. Use when pressure gauge indicates high pressure or water flow is reduced.
Laħlaħ: Used after backwashing to settle the sand and flush out any remaining dirt before returning to filter mode.
Skart: Bypasses the filter and pumps water directly out of the waste port. Useful for vacuuming heavy debris or lowering pool water level.
Irriċirkola: Circulates water without filtering. Useful for distributing chemicals.
Magħluq: Shuts off all flow to the filter. Use only when the pump is off.

Importanti: Always turn off the pump before changing the multi-port valve position.

Programmer and pressure indicator on the pump

Immaġni: Dettaljata view of the pump's control panel, showing the digital programmer for setting operation times and the pressure indicator gauge, which helps determine when backwashing is needed.

Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-pompa tal-filtru tar-ramel tiegħek.

Ħasil b'lura: Perform backwashing when the pressure gauge reads 3-5 PSI (0.21-0.35 Bar) above the starting clean pressure, or when water flow to the pool is noticeably reduced.
1. Itfi l-pompa.
2. Set the multi-port valve to "Backwash".
3. Turn on the pump and backwash until the water in the sight glass is clear (approx. 2-3 minutes).
4. Itfi l-pompa.
5. Set the multi-port valve to "Rinse".
6. Ixgħel il-pompa u laħlaħ għal 30-60 sekonda.
7. Itfi l-pompa.
8. Set the multi-port valve to "Filter".
9. Turn on the pump for normal operation.
Sostituzzjoni tar-Ramel: Filter sand typically needs to be replaced every 3-5 years, depending on usage and water quality. Glass filter media may last longer.
Winterization: Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the unit in a dry, protected area.
Tindif: Periodically clean the pump's strainer basket (if applicable) and inspect all O-rings and seals for wear.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Il-pompa ma tibdax	No power; GFCI/RCD tripped; Motor overheated; Impeller jammed.	Check power connection; Reset GFCI/RCD; Allow motor to cool; Clear impeller of debris.
Fluss ta 'ilma baxx	Clogged filter sand; Clogged strainer basket; Air leak in suction line; Low water level in pool.	Backwash/Rinse filter; Clean strainer basket; Check hose connections for leaks; Add water to pool.
Water leaking from pump/valve	Loose connections; Damaged O-rings/seals; Cracked housing.	Tighten connections; Replace O-rings/seals; Contact customer support for replacement parts.
Ilma tal-pixxina mdardar	Insufficient filtration time; Dirty filter sand; Improper chemical balance.	Increase filtration time; Backwash/Rinse filter; Test and adjust pool chemicals.

Speċifikazzjonijiet

Mudell: 26642 / SX925
Dimensjonijiet (L x W x H): 44 x 35 x 30 ċm (17.3 x 13.8 x 11.8 pulzieri)
Piż: 7.34 kg (16.18 lbs)
Materjal: Plastik
Sors tal-Enerġija: AC adapter
Voltage: 220-240 volt
Kapaċità tal-Pompa: 3,500 L/h (925 GPH)
Circulation Capacity: 2,000 L/h (530 GPH)
Temperatura massima tal-ilma: 35°C (95°F)
Suitable Pool Volume: Approx. 16,805 L (4,440 gallons)
Saltwater Compatibility: Up to 3 g/l salt content

Intex sand filter pump connected to a pool

Image: The Intex sand filter pump shown in an outdoor setting, connected to a pool, illustrating its typical use case for pools under 17,000 liters.

Garanzija u Appoġġ

Intex products are manufactured with the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex stands behind all its products. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Intex websit.

Please retain your proof of purchase as it will be required for warranty service.

	Manwal tas-Sid tal-Pompa tal-Filtru tar-Ramel Intex SF10110 Krystal Clear Manwal komprensiv tas-sid għall-Intex SF10110 Krystal Clear Sand Filter Pump, li jiddeskrivi r-regoli tas-sigurtà, l-istruzzjonijiet tas-setup, il-proċeduri operattivi, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet tal-prodott għall-aħjar kura tal-pixxina.
	Manwal tas-Sid tal-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SF90220T Manwal komprensiv tas-sid għall-Intex Krystal Clear Sand Filter Pump, Mudell SF90220T. Jinkludi regoli ta' sigurtà, referenza għall-partijiet, struzzjonijiet ta' setup, proċeduri operattivi, manutenzjoni, issolvi l-problemi, u informazzjoni dwar il-garanzija.
	Manwal tas-Sid tal-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SF90110-1 Manwal komprensiv tas-sid għall-Intex Krystal Clear Sand Filter Pump, Mudell SF90110-1. Jinkludi struzzjonijiet ta' setup, proċeduri ta' tħaddim, pariri dwar il-manutenzjoni, gwida għas-soluzzjoni tal-problemi, u informazzjoni dwar is-sigurtà għal pixxini 'l fuq mill-art.
	Manwal u Gwida għall-Installazzjoni tal-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SX 1500 Manwal komprensiv għall-utent u gwida għall-installazzjoni tal-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SX 1500 (Mudell SF90220-2). Tgħallem dwar installazzjoni sikura, tħaddim, manutenzjoni, issolvi l-problemi, u informazzjoni dwar il-garanzija.
	Intex SX1500 Krystal Clear Sand Filter Pump Manwal tas-Sid Manwal komprensiv tas-sid għall-Intex SX1500 Krystal Clear Sand Filter Pump, li jkopri r-regoli tas-sigurtà, referenza għall-partijiet, struzzjonijiet għas-setup, proċeduri operattivi, kura tal-pixxina, issolvi l-problemi, u garanzija limitata.
	Manwal tas-Sid tal-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SX 925 Manwal tas-sid għall-Pompa tal-Filtru tar-Ramel Intex Krystal Clear SX 925 (Mudell SF40220), li jipprovdi regoli essenzjali ta' sigurtà, struzzjonijiet dettaljati għas-setup, proċeduri operattivi, linji gwida għall-manutenzjoni, pariri dwar is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija għal filtrazzjoni effiċjenti tal-pixxina.

Intex 26642