Introduzzjoni
Thank you for choosing the WORKPRO 20V Cordless String Trimmer/Edger and Leaf Blower combo. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new tools. Please read this manual thoroughly before first use and keep it for future reference.
Image: The WORKPRO 20V Cordless String Trimmer/Edger and Leaf Blower, along with their respective batteries, chargers, and trimmer line spools.
Informazzjoni dwar is-Sigurtà
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This includes, but is not limited to:
- Read all instructions before operating the tools.
- Ilbes tagħmir protettiv personali (PPE) xieraq bħal nuċċalijiet tas-sigurtà, ingwanti, u protezzjoni tas-smigħ.
- Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod miż-żona tal-operat.
- Do not operate the tools in wet conditions or in the presence of flammable liquids or gases.
- Kun żgur li l-batterija tkun iċċarġjata kompletament qabel l-użu u tneħħiha meta ma tkunx qed tintuża jew waqt il-manutenzjoni.
- Inspect the tools for damage before each use. Do not use if damaged.
Image: A visual guide demonstrating the installation steps for the string trimmer, including attaching the nylon line spool, protective hood, flower guard, auxiliary handle, and inserting the battery pack.
WARNING: Please carefully read and understand the operator's manual before using this product.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- WORKPRO 20V Cordless String Trimmer/Edger
- WORKPRO 20V Cordless Leaf Blower
- 20V Li-ion Battery (4.0Ah)
- Ċarġer tal-batterija
- Trimmer Line Spools (pre-installed and/or spare)
- Protective Guard for Trimmer
- Auxiliary Handle for Trimmer
- Manwal tal-Operatur
Setup
1. Iċċarġjar tal-Batterija
Before first use, fully charge the 20V Li-ion battery. Connect the charger to a standard power outlet and insert the battery. The charging indicator light will show the charging status. A full charge typically takes about 1 hour.
Image: A hand inserting the 20V 4.0Ah battery into the battery slot of the leaf blower, highlighting the larger battery capacity.
2. String Trimmer/Edger Assembly
- Install Trimmer Line Spool: Press together the nylon line spool and the spool cover, then insert them into the trimmer head.
- Mount Protective Hood: Mount the protective hood onto the motor head and secure it with screws.
- Attach Flower Guard: Attach the flower guard to the motor housing.
- Mount Auxiliary Handle: Mount the auxiliary handle into the operating handle and rotate it until it's at the correct angle for comfortable use.
- Daħħal il-batterija: Slide the charged battery pack into the device until it clicks into place correctly.
Image: A visual guide demonstrating the installation steps for the string trimmer, including attaching the nylon line spool, protective hood, flower guard, auxiliary handle, and inserting the battery pack.
3. Leaf Blower Assembly
The leaf blower typically requires minimal assembly. Ensure the blower tube is securely attached to the main unit. Press the blower tube release button if needed to install or take apart the tube.
Image: A detailed diagram of the leaf blower, pointing out its key features such as the 20V Max 4.0Ah Battery, Variable Speed Dial, Ergonomic Grip, Blower Tube Release Button, Hang Hole, and an integrated Scraper.
Istruzzjonijiet Operattivi
1. String Trimmer/Edger Operation
- Power On/Off: Press the power button to start or stop the trimmer.
- Tul aġġustabbli: The telescopic pole can be adjusted for different user heights. Loosen the collar, extend or retract the pole, and then tighten the collar to secure.
- Ras tat-Tqattigħ Aġġustabbli: The cutting head can be adjusted to 90° positions for various tasks like trimming, edging, or light mowing. Press the adjustment button and rotate the head to the desired angle.
- Automatic Feeding Spool: The innovative push-button spool system feeds line when needed, eliminating the need for bumping. The 12-inch cutting width and 6500 RPM no-load speed ensure efficient trimming.
Image: The WORKPRO tool demonstrating its 3-in-1 versatility, showing its use as a mower, an edger, and a trimmer for different lawn care needs.
Image: A visual representation of the string trimmer's adjustable telescopic pole, illustrating its lowest (1-1/2 inch) and highest (11-4/5 inch) settings to accommodate different user heights.
Image: A diagram illustrating the 90° adjustable positions of the string trimmer's cutting head, allowing for easy setting to the most comfortable angle.
2. Leaf Blower Operation
- Power On/Off: Press the power button to start or stop the blower.
- Veloċità Veloċi Dial: The leaf blower features a 5-speed variable speed dial. Rotate the dial to select the desired airflow for different tasks. Air volume can reach 350 CFM and airspeed 85 MPH, suitable for cleaning leaves in yards, gardens, and drains.
- Disinn ħafif: Weighing only 5.7 lbs with the large battery, the blower is designed for comfortable one-handed use.
Immaġni: Close-up view of a hand operating the 5-speed variable speed dial on the leaf blower, demonstrating the control and versatility it offers.
Image: A man using the WORKPRO leaf blower to efficiently clear leaves and debris from a concrete sidewalk in a residential area.
Manutenzjoni
- Tindif: Wara kull użu, naddaf l-għodda b'adamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no debris is lodged in vents or moving parts.
- Sostituzzjoni tal-Linja tat-Trimmer: When the trimmer line is depleted, replace the spool with a new one. Refer to the "Setup" section for spool installation steps. Use only recommended trimmer line (diameter: 1/16 inch).
- Kura tal-batterija: Store the battery in a cool, dry place away from direct sunlight. Do not store fully discharged. Charge the battery periodically if not used for extended periods.
- Ħażna: Store the tools in a dry, secure location, out of reach of children. The leaf blower has a hang hole for convenient storage.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tibda. | Il-batterija mhux iċċarġjata jew mhux imdaħħla sew. | Kun żgur li l-batterija tkun iċċarġjata kompletament u mwaħħla sew f'postha. |
| Il-linja tat-trimmer mhux qed titma'. | Spool empty or line tangled. | Replace spool or untangle line. Ensure correct line diameter (1/16 inch). |
| Reduced power/performance. | Low battery charge or debris obstruction. | Recharge battery. Clear any debris from cutting head or blower nozzle. |
| Blower not moving air effectively. | Nozzle obstructed or incorrect speed setting. | Check for obstructions in the nozzle. Adjust to a higher speed setting using the variable speed dial. |
Speċifikazzjonijiet
- Ditta: XOGĦOL PRO
- Mudell: B09M3H6LG3
- Sors tal-Enerġija: Imħaddem bil-batterija (20V Li-ion)
- Piż tal-oġġett: 5.7 Pounds (for blower with large battery)
- Wisa' tat-Tqattigħ tat-Trimmer tal-Ħjut: 12 Pulzier
- String Trimmer Speed: 6500 RPM (no-load)
- Leaf Blower Air Volume: 350 CFM
- Leaf Blower Airspeed: 85 MPH
- Assemblaġġ Meħtieġa: Iva
Garanzija u Appoġġ
WORKPRO products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official WORKPRO websit.
For technical support, replacement parts, or service inquiries, please contact WORKPRO customer service. Contact information can typically be found on the product packaging or the official brand websit.
Riżorsi onlajn:
- Visit the WORKPRO Store on Amazon: WORKPRO Amazon Store
