BUFFBEE Digital Alarm Clock FM Radio with Wireless Charging User Manual

1. Introduzzjoni

Grazzi tax-xiriasing the BUFFBEE Digital Alarm Clock FM Radio with Wireless Charging. This device combines a digital alarm clock, FM radio, 10W fast wireless charger, and a USB charging port into a single unit. It features five distinct wake-up sounds, adjustable volume control, and a full brightness dimmer for optimal comfort in your bedroom environment. Please read this manual carefully to ensure proper setup and operation.

Figure 1.1: BUFFBEE Digital Alarm Clock with a smartphone wirelessly charging on top.

2. Setup

2.1 Konnessjoni tal-Enerġija

1. Connect the provided power adapter to the DC 9V port on the back of the alarm clock.
2. Ipplaggja l-adapter tal-enerġija f'bokk elettriku standard. Id-displej tal-arloġġ se jixgħel.
3. Nota: The internal battery backup is for saving time and alarm settings only. The device requires a continuous power connection to function.

2.2 Issettjar tal-Ħin

1. Agħfas u żomm il- ĦIN buttuna li tinsab fuq il-pannell ta’ fuq. Iċ-ċifri tas-sigħat jibdew jteptpu.
2. Uża l- UP (▲) jew 'L isfel (▼) buttons to adjust the hour.
3. Agħfas il- ĦIN button again to confirm the hour and proceed to set the minutes. The minute digits will flash.
4. Uża l- UP (▲) jew 'L isfel (▼) buttons to adjust the minutes.
5. Agħfas il- ĦIN button one more time to save the time setting.

2.3 Issettjar tal-Allarm

1. Agħfas u żomm il- ALLARM buttuna. Iċ-ċifri tas-siegħa tal-allarm jibdew jteptpu.
2. Uża l- UP (▲) jew 'L isfel (▼) buttons to adjust the alarm hour.
3. Agħfas il- ALLARM button again to confirm the hour and proceed to set the alarm minutes. The minute digits will flash.
4. Uża l- UP (▲) jew 'L isfel (▼) buttons to adjust the alarm minutes.
5. Agħfas il- ALLARM Agħfas il-buttuna darba oħra biex issalva l-ħin tal-allarm.
6. Biex tattiva jew tiddiżattiva l-allarm, agħfas fil-qosor il-buttuna ALLARM buttuna. Ikona ta' allarm tidher fuq id-displej meta tiġi attivata.

Figure 2.1: Rear panel with power and USB connections.

3. Istruzzjonijiet Operattivi

3.1 Iċċarġjar bla fili

The top surface of the alarm clock features a 10W fast wireless charging pad. This is compatible with 5W, 7.5W, and 10W wireless-enabled phones.

1. Place your wireless-enabled smartphone directly on the charging pad located on the top of the clock.
2. Kun żgur li t-telefon ikun iċċentrat fuq il-pjattaforma tal-iċċarġjar għal konnessjoni ottimali.
3. A lightning icon will appear on the clock's display to indicate that your phone is charging.

Figure 3.1: Wireless charging in progress.

Figure 3.2: Wireless charging compatibility.

3.2 Port tal-Iċċarġjar tal-USB

An additional USB port is located on the back of the unit for charging other devices, such as smartwatches or non-wireless charging phones.

1. Connect your device's USB charging cable to the USB port on the back of the alarm clock.
2. Qabbad it-tarf l-ieħor tal-kejbil mat-tagħmir tiegħek.

Figure 3.3: Simultaneous wireless and USB charging.

3.3 Tħaddim tar-Radju FM

L-arloġġ tal-allarm jinkludi radju FM b'firxa ta' frekwenza ta' 87.5-108.0 MHz.

1. To turn on the FM radio, press the RADJU buttuna.
2. To scan for stations, press and hold the UP (▲) jew 'L isfel (▼) buttons. The radio will automatically tune to the next available station.
3. Biex tirfina manwalment, agħfas fil-qosor il-buttuna UP (▲) jew 'L isfel (▼) buttuni.
4. To save a preset station, press and hold the RADJU button until the preset number flashes, then use the UP (▲) jew 'L isfel (▼) buttons to select a preset slot. Press RADJU mill-ġdid biex tikkonferma.
5. Biex tirrevoka stazzjon issettjat minn qabel, agħfas fil-qosor il-buttuna RADJU buttuna biex tiċċaqlaq bejn il-presets salvati.
6. Adjust the radio volume using the volume control dial or buttons (if present, otherwise use general volume controls).
7. To improve FM reception, ensure the radio antenna on the back of the unit is fully extended.

Figure 3.4: FM Radio display.

3.4 Alarm Sounds and Volume

The alarm clock offers 5 distinct wake-up sounds and adjustable alarm volume (0-15 levels).

1. When setting the alarm, after setting the time, you can select the alarm sound.
2. Agħfas il- Ħsejjes tal-allarm button to cycle through the available sounds: Beep, Bird Sound, Bells, Piano Sound, or FM Radio.
3. To adjust the alarm volume, use the dedicated volume buttons or dial on the unit.

Figure 3.5: Available alarm sounds.

3.5 Dimmer tal-Wiri

The display brightness can be adjusted from 0% to 100% to suit your preference.

1. Sib il- DISPLAY DIMMER switch or dial, typically on the back or side of the unit.
2. Adjust the switch/dial to increase or decrease the display brightness.

Figure 3.6: Display brightness adjustment.

3.6 Kontrolli Fuqview

For a visual guide to the top panel controls, please refer to the video below.

4. Manutenzjoni

4.1 Tindif

• Biex tnaddaf l-apparat, uża drapp ratba u niexfa.
• Tużax prodotti tat-tindif likwidi, prodotti tat-tindif li joborxu, jew sprejs kimiċi, għax dawn jistgħu jagħmlu ħsara lill-wiċċ jew lill-komponenti interni.
• Kun żgur li l-apparat ikun splaggjat qabel it-tindif.

4.2 Kura Ġenerali

• Evita li tesponi l-apparat għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
• Do not disassemble the unit. Any repairs should be performed by qualified personnel.
• Żomm l-apparat 'il bogħod mill-ilma jew likwidi oħra.

5 Issolvi l-problemi

Q: Għaliex il-wirja hija vojta wara li twaħħal?

A: Please check if the DISPLAY DIMMER switch on the back of the unit is set to the HIGH position. If it is set to a very low position, the display may appear blank in bright environments.

Q: How can I tell if my phone is wirelessly charging?

A: A lightning icon will appear on the alarm clock's display when a compatible phone is correctly placed on the wireless charging pad and is actively charging.

Q: Does the battery backup allow the clock to work without a power cord?

A: No, the battery backup is solely for saving the time and alarm settings during a power outage. The device requires the power cord to be plugged in for full functionality (display, radio, charging, alarm sound).

Q: Which phones are supported by wireless charging?

A: The wireless charger is compatible with most Qi-enabled smartphones, including but not limited to: iPhone 13/13 Pro/13 Pro Max/13 Mini/12/12 Pro/12 Pro Max/12 Mini/11/11 Pro/11 Pro Max/X/XS/XS Max/XR/8/8+/SE; Samsung S21/S21+/21 Ultra/S20/S20+/S20 Ultra/S10/S10+/S10E/S9/S9+/S8/S8+/S7/S7+/S6/S6E; Note 20/20 Ultra/Note 10/10 Pro/Note 9/8/5; Google Nexus 4/5/6, and other wireless-enabled phones.

6. Speċifikazzjonijiet

7. Informazzjoni dwar Garanzija

BUFFBEE products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, improper installation or operation, or unauthorized repairs. Please retain your proof of purchase for warranty claims.

8. Appoġġ għall-Klijent

If you have any questions, concerns, or require assistance with your BUFFBEE Digital Alarm Clock, please contact our customer support team. For the most up-to-date contact information, please visit the official BUFFBEE website or refer to the packaging of your product.

Appoġġ onlajn: Żur il-BUFFBEE Store fuq Amazon