1. Introduzzjoni
This manual provides essential information for the safe and effective use of your glo HYPER+ heated tobacco device. The glo HYPER+ offers a versatile experience with both normal and high-temperature modes, allowing for personalized usage. Please read this manual thoroughly before using the device.
Nota Importanti: This product includes the electronic tobacco device only. It does not contain liquid or nicotine, nor does it include tobacco sticks (neostiks).
2. Kontenut tal-Pakkett
Verify that all items listed below are included in your package. According to the product packaging, the contents are:
- glo HYPER+ Device (Main Unit)
- Cable tal-Iċċarġjar tal-USB
- Pinzell tat-tindif
- Manwal ta 'Istruzzjoni (dan id-dokument)
Note: Tobacco sticks (e.g., neostiks) are not included and must be purchased separately.
Image: The glo HYPER+ Starter Kit packaging, indicating the included items.
3. Setup
3.1 Iċċarġjar inizjali
- Connect the provided USB charging cable to the charging port on the bottom of the glo HYPER+ device.
- Ipplaggja t-tarf l-ieħor tal-kejbil USB ma' adapter tal-enerġija USB kompatibbli (mhux inkluż) jew mal-port USB tal-kompjuter.
- The LED indicator lights on the device will illuminate to show the charging status. A full charge typically takes approximately 90 minutes.
- Once fully charged, all LED indicators will be solid. Disconnect the device from the charger.
Nota: For optimal battery life, it is recommended to fully charge the device before its first use.
4. Istruzzjonijiet Operattivi
4.1 Inserting a Tobacco Stick
- Open the top cap of the glo HYPER+ device.
- Gently insert a compatible tobacco stick into the heating chamber until it reaches the bottom. Do not force the stick.
- Close the top cap.
4.2 Ixgħel u Tisħin
The glo HYPER+ offers two heating modes: Standard and Boost.
- Modalità Standard: Press and hold the control button for approximately 3 seconds until the device vibrates and the LED indicators begin to light up sequentially. The device will heat for about 20 seconds.
- Boost Mode (High Temperature): Press and hold the control button for approximately 5 seconds until the device vibrates twice and the LED indicators light up more rapidly. The device will heat for about 15 seconds, providing a more intense experience.
Once heating is complete, the device will vibrate again, and the LED indicators will remain solid, indicating it is ready for use.
4.3 Użu tal-Apparat
Inhale gently through the tobacco stick. Each session lasts approximately 4 minutes in Standard mode and 3 minutes in Boost mode, or until the device vibrates and the LED indicators turn off.
4.4 Ending a Session
- When the session ends, the device will vibrate, and the LED indicators will turn off.
- Open the top cap and carefully remove the used tobacco stick. Dispose of it properly.
- Close the top cap to prevent debris from entering the heating chamber.
Immaġni: Close-up view of the glo HYPER+ device, highlighting its design and control button.
5. Manutenzjoni
Regular cleaning ensures optimal performance and longevity of your glo HYPER+ device.
5.1 Cleaning the Heating Chamber
- Ensure the device is completely cooled down before cleaning.
- Open both the top and bottom caps of the device.
- Insert the provided cleaning brush into the heating chamber from both ends (top and bottom) and gently rotate it to remove any residue.
- Tap the device gently to dislodge any loose debris.
- Close both caps after cleaning.
Rakkomandazzjoni: Clean your device after every 20 sessions or as needed to maintain optimal flavor and airflow.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Apparat mhux mixgħul. | Batterija baxxa. | Iċċarġja l-apparat billi tuża l-kejbil USB ipprovdut. |
| No vapor or weak vapor production. | Incorrectly inserted tobacco stick, device not fully heated, or dirty heating chamber. | Ensure the tobacco stick is fully inserted. Wait for the device to complete heating. Clean the heating chamber. |
| Apparat mhux jiċċarġja. | Kejbil jew sors tal-enerġija difettuż. | Ipprova kejbil USB jew adapter tal-enerġija differenti. Kun żgur li l-konnessjonijiet huma siguri. |
| Apparat li qed jisħon iżżejjed. | Continuous use or environmental factors. | Allow the device to cool down. Avoid using in direct sunlight or hot environments. If the issue persists, discontinue use and contact support. |
Jekk tiltaqa' ma' problemi li mhumiex elenkati hawn jew jekk il-problema tippersisti wara li tipprova s-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
7. Speċifikazzjonijiet
- Mudell: HYPER+
- Ditta: glo
- Dimensjonijiet (Ippakkjar): 11.1 x 8.6 x 7.2 ċm
- Piż (Ippakkjar): 310 g
- Kulur: Deheb
- Komponenti Inklużi: Main unit, USB charging cable, cleaning brush, instruction manual
- Modi tat-Tisħin: Standard, Boost (High Temperature)
- L-Ewwel Data Disponibbli: 2021/11/23
8. Garanzija u Appoġġ
For warranty information, product support, or to report any issues, please refer to the official glo webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
