Manwal tal-Utent tat-Trasmettitur HDMI Addizzjonali tal-Marmitek Stream T2 Pro

Prodott Overview

The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.

Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.

Setup Istruzzjonijiet

Follow these steps to set up your Marmitek Stream T2 Pro transmitter:

Konnessjoni tal-Enerġija: Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
Konnessjoni HDMI: Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
Tqabbil mar-Riċevitur: Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
Għażla tas-Sors: Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
Għażla tal-Wiri: On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.

Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.

It-tħaddim tal-Apparat

Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:

Konnessjoni Awtomatika: The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
Wireless Display Modes:
- Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
- AirPlay: For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
- DLNA: Compatible with various devices and media servers for streaming multimedia content.
Indikatur LED: The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.

Manutenzjoni

To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:

Tindif: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
Ħażna: Meta ma tkunx qed tużah għal perjodi twal, aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Ventilazzjoni: Ensure the ventilation holes on the device are not blocked to prevent overheating.
Immaniġġjar: Immaniġġja l-apparat b'attenzjoni. Evita li twaqqgħu jew li tissottomettih għal impatti qawwija.

Issolvi l-problemi

If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:

Problema	Kawża Possibbli	Soluzzjoni
L-ebda sinjal fuq il-wiri.	Incorrect HDMI input selected on source or display. It-trasmettitur mhux imħaddem. Not paired with receiver. Out of range or obstructions.	Verify HDMI input selection on both source and display. Ensure the transmitter is properly powered via USB. Perform pairing procedure as per S2 Pro manual. Reduce distance between transmitter and receiver, remove obstructions.
Sinjal intermittenti jew ta’ kwalità fqira.	Interferenza minn apparati oħra mingħajr fili. Weak signal due to distance or obstructions. Source device resolution incompatibility.	Move the device away from other wireless devices (e.g., Wi-Fi routers, cordless phones). Kun żgur li l-linja tal-vista tkun ċara u naqqas id-distanza. Check if source device resolution is supported (up to 1080p/60Hz).
Cannot connect via AirPlay/Miracast.	Device not on the same network (for AirPlay/DLNA). Feature not enabled on source device.	Ensure both the source device and the Stream S2 Pro receiver are connected to the same Wi-Fi network. Enable screen mirroring/wireless display feature on your source device.

Speċifikazzjonijiet Tekniċi

Karatteristika	Dettall
Brand	Marmitek
Numru tal-Mudell	8392
Tip ta' Prodott	Additional HDMI Transmitter
Riżoluzzjoni massima	HD1080p/60 Hz
Firxa Wireless	Sa 20 metri
Teknoloġija tal-Konnettività	USB, HDMI
Tip ta' Konnettur	HDMI
Komunikazzjoni bla fili	Miracast, AirPlay, DLNA
Karatteristiċi Speċjali	Portabbli
Apparati Kompatibbli	Laptops, various source devices with HDMI output
Piż tal-oġġett	200 Gramm
Qawwa tal-Ħruġ	5 Watts
Servizzi tal-Internet Appoġġjati	Browser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.)

Garanzija u Appoġġ

Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għal termini u kundizzjonijiet dettaljati tal-garanzija.

For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's webis-sit jew fl-imballaġġ oriġinali tal-prodott.

	Gwida għas-Setup tat-Trasmettitur u r-Riċevitur HDMI Wireless Marmitek Stream S2 Pro Tgħallem kif tinstalla u tissettja t-trasmettitur u r-riċevitur Marmitek Stream S2 Pro Wireless HDMI għal mirroring tal-iskrin bla xkiel permezz tal-AirPlay u Miracast. Jinkludi speċifikazzjonijiet tekniċi u struzzjonijiet ta' sigurtà.
	Kejbil HDMI Wireless Marmitek Stream S1 Pro - Gwida għall-Utent Gwida komprensiva għall-kejbil HDMI mingħajr fili Marmitek Stream S1 Pro, li tkopri l-kontenut tas-sett, il-konnessjonijiet, l-istruzzjonijiet tas-sigurtà, l-installazzjoni, l-indikaturi tal-istatus LED, il-bidu tal-preżentazzjoni, u l-ispeċifikazzjonijiet tekniċi. Tippermetti trażmissjoni mingħajr fili minn PC/laptop għal displays.
	Marmitek Split 712 HDMI 2.1 Splitter: 8K60hz, 4K120hz, HDR, VRR, ALLM Manwal tal-utent u speċifikazzjonijiet tekniċi għall-isplitter Marmitek Split 712 HDMI 2.1. Tgħallem dwar il-karatteristiċi tiegħu inkluż appoġġ 8K60hz/4K120hz, HDR, VRR, ALLM, modi EDID (Auto, Copy, Scaler), installazzjoni, u konnettività.
	Marmitek MegaView Manwal tal-Utent tal-Estensur HDMI 90 Manwal tal-utent għall-Marmitek MegaView 90, estensur HDMI li jittrażmetti sinjali fuq kejbil Ethernet CAT5e/6 wieħed sa 120 metru. Jinkludi s-setup, l-ispeċifikazzjonijiet, u s-soluzzjoni tal-problemi.
	Marmitek TV Anywhere Wireless HD: Manwal tal-Utent tal-Estensur HDMI Wireless Manwal komprensiv għall-utent għall-Marmitek TV Anywhere Wireless HD, li jagħti dettalji dwar l-estensjoni tal-HDMI mingħajr fili, is-setup, karatteristiċi bħar-ritorn tal-IR u l-istriming tal-ismartphone, u s-soluzzjoni tal-problemi. Jappoġġja Full HD 1080p.
	Manwal tal-Utent tal-Marmitek Connect AE34 Manwal komprensiv għall-utent għall-Marmitek Connect AE34, li jagħti dettalji dwar l-ispeċifikazzjonijiet, l-installazzjoni, l-użu u s-soluzzjoni tal-problemi tiegħu. Tgħallem kif tikkonnettja apparati awdjo u tiġbed l-awdjo minn sorsi AV.

Marmitek 8392