1. Introduzzjoni
This user manual provides detailed instructions for the installation, operation, and maintenance of your WALI GSMU001 Ultrawide Monitor Arm. Please read this manual thoroughly before installation to ensure correct setup and safe usage. Keep this manual for future reference.
2. Prodott Aktarview
The WALI GSMU001 Monitor Arm is designed to enhance your workspace ergonomics and efficiency. It features a robust gas spring mechanism for smooth adjustments and integrated USB 3.0 ports for convenient connectivity.
- Kompatibilità: Supports most flat or curved LCD/LED screens from 13 to 49 inches.
- Kapaċità tal-piż: Holds monitors up to 33 lbs (15 kg).
- Konformità VESA: Compatible with 75x75mm and 100x100mm mounting patterns.
- Ħxuna tal-Iskrivanija: Żewġ-stage locking system compatible with 0.39"-1.8" (10-45mm) thick desks for both C-clamp and Grommet Base installations.
- Aġġustabilità: Monitor head can tilt +45°/-45°, swivel +90°/-90°, and rotate +180°/-180°.
- Konnettività: Includes 2 easily accessible USB 3.0 ports on the base.
Figure 2.1: WALI GSMU001 Monitor Arm and included accessories.
3. Informazzjoni dwar is-Sigurtà
TWISSIJA: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of warranty. Keep these instructions in a safe place for future reference.
- Teċċedix il-kapaċità massima tal-piż ta' 33 lbs (15 kg).
- Ensure your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Always use an assistant when lifting or positioning heavy equipment.
- Tighten all screws firmly but do not overtighten. Overtightening can damage the threads or components.
- Dan il-prodott fih oġġetti żgħar li jistgħu jkunu ta 'periklu ta' fgar jekk jinbela '. Żomm 'il bogħod mit-tfal.
4. Kontenut tal-Pakkett
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact WALI customer support.
- Assemblea tad-Driegħ tal-Monitor
- C-Clamp Bażi
- Bażi Grommet
- Pjanċa VESA
- Kit tal-Ħardwer tal-Immuntar (viti, woxers, spacers)
- Allen Wrenches
- Manwal għall-Utent
5. Installazzjoni
The WALI GSMU001 monitor arm offers two installation methods: C-clamp and Grommet Base. Choose the method best suited for your desk.
5.1 C-Clamp Installazzjoni
- Waħħal is-C-clamp il-bażi mat-tarf tal-iskrivanija tiegħek. Kun żgur li l-ħxuna tal-iskrivanija hija bejn 0.39" u 1.8".
- Issikka l-C-clamp screw until the base is securely fastened to the desk.
- Insert the main pole of the monitor arm into the C-clamp bażi.
- Secure the pole with the provided set screw using an Allen wrench.
5.2 Grommet Base Installation
- If your desk has a grommet hole, remove the existing grommet cover. Ensure the hole diameter is suitable for the grommet base.
- Place the grommet base over the hole, ensuring the desk thickness is between 0.39" and 1.8".
- Thread the grommet screw through the base and tighten it from underneath the desk.
- Insert the main pole of the monitor arm into the grommet base.
- Secure the pole with the provided set screw using an Allen wrench.
Figure 5.1: C-clamp and Grommet mounting options.
5.3 Twaħħil tal-Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are securely tightened.
- With assistance, slide the monitor (with the attached VESA plate) onto the arm's mounting head.
- Secure the monitor to the arm by tightening the locking screw on the VESA plate.
5.4 Connecting USB Ports
Connect the two USB 3.0 cables from the monitor arm base to available USB 3.0 ports on your computer for convenient access.
Figure 5.2: Integrated USB 3.0 ports on the base.
5.5 Gwida bil-Vidjo għall-Installazzjoni
Video 5.1: Official product video demonstrating the features, installation, and adjustability of the WALI GSMU001 Single Monitor Stand Mount Arm.
6. Adjustments and Operation
The WALI GSMU001 monitor arm offers a wide range of adjustments to achieve your desired ergonomic position.
6.1 Aġġustament tat-Tensjoni tal-Mola tal-Gass
The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth movement and stable positioning. Use the provided Allen wrench to adjust the tension screw located on the arm.
- Turn clockwise for lighter monitors (to reduce tension).
- Turn counter-clockwise for heavier monitors (to increase tension).
Nota: Keep the arm in a horizontal level position while adjusting the tension for accurate results.
Figure 6.1: Gas spring tension adjustment.
6.2 Angle Adjustments (Tilt, Swivel, Rotation)
The monitor arm allows for flexible positioning of your screen:
- Mejjel: Adjust the monitor screen +45°/-45° vertically to reduce glare and optimize viewangolu tal-ing.
- Dawwar: Rotate the monitor +90°/-90° horizontally to share your screen or change viewing direzzjoni.
- Rotazzjoni: Rotate the monitor +180°/-180° to switch between landscape and portrait orientations.
Figure 6.2: Monitor arm angle adjustments.
7. Ġestjoni tal-Kejbil
The monitor arm features integrated cable management clips to keep your workspace tidy and organized. Route your monitor's power and video cables through these clips to prevent clutter and ensure smooth arm movement.
Figure 7.1: Cable management system.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | WALI |
| Numru tal-Mudell | GSMU001 |
| Kompatibilità tad-Daqs tal-Monitor | 13" sa 49" |
| Kapaċità tal-piż | Sa 33 lbs (15 kg) |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Ħxuna tal-iskrivanija (C-cl)amp/Grommet) | 0.39" - 1.8" (10-45mm) |
| Medda Mejjel | +45° / -45° |
| Medda li ddur | +90° / -90° |
| Medda ta' Rotazzjoni | +180° / -180° |
| Portijiet USB | 2 x USB 3.0 |
| Materjal | Metall |
| Piż tal-oġġett | 11.03 liri |
| Dimensjonijiet tal-Prodott | 5.35 x 11.14 x 16.85 pulzieri |
9 Issolvi l-problemi
If you encounter issues with your WALI GSMU001 monitor arm, please refer to the following common solutions:
- Monitor sags or does not stay in position: Adjust the gas spring tension. Turn the tension screw counter-clockwise for heavier monitors. Ensure the arm is horizontal during adjustment.
- Monitor is too stiff to move: Adjust the gas spring tension. Turn the tension screw clockwise for lighter monitors.
- Monitor is not level: Check that the VESA plate is securely attached to the monitor and the arm. Adjust the tilt mechanism if necessary.
- USB ports not working: Ensure the USB 3.0 cables from the arm base are securely connected to your computer's USB 3.0 ports. Test with another USB device.
- Arm feels loose at the base: Issikka mill-ġdid is-C-clamp or grommet base screws.
If the problem persists, contact WALI customer support for further assistance.
10. Manutenzjoni
To ensure the longevity and optimal performance of your WALI GSMU001 monitor arm, follow these maintenance guidelines:
- Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati.
- Clean the surface of the monitor arm with a soft, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
- Do not lubricate the gas spring mechanism unless specifically instructed by WALI customer support.
11. Garanzija u Appoġġ
WALI products are designed for durability and performance. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official WALI websit.
Experienced and friendly US-based customer support is available to assist you 7 days a week. If you have any questions, require technical assistance, or need to report a missing/damaged part, please contact WALI customer support.
Informazzjoni ta' Kuntatt: Please refer to the contact details provided on the WALI official webis-sit jew l-imballaġġ tal-prodott tiegħek.
