TechniSat TECHNIVOLT 2200 Smart 22 kW Charging Station User Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation of your TechniSat TECHNIVOLT 2200 Smart 22 kW Charging Station. Please read these instructions carefully before installation and use to ensure proper functionality and safety.

The TECHNIVOLT 2200 Smart is designed for fast, safe, and efficient charging of electric vehicles at home, featuring a Type 2 charging connector and RFID access control.

2. Informazzjoni dwar is-Sigurtà

Osserva l-linji gwida tas-sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat:

• Installazzjoni professjonali: The charging station must be installed by a qualified electrician in accordance with local regulations and standards.
• Klassi ta' Protezzjoni I: The device is Protection Class I, meaning the protective earth (PE) conductor must be properly connected to ensure electrical safety.
• DC Fault Current Detection: An integrated DC fault current identification of 6 mA is present. This enhances safety by detecting direct current faults.
• Użu fuq barra: The wall box has an IP54 protection rating, making it suitable for outdoor installation and protected against dust and splashing water.
• Unauthorized Access: Use the integrated RFID function to prevent unauthorized charging.
• Integrità tal-Cable: Ensure the charging cable is not damaged before each use. Do not use the device if the cable or connector is compromised.

3. Prodott Aktarview

The TechniSat TECHNIVOLT 2200 Smart is a high-performance charging station designed for electric vehicles. Key features include:

• Qawwa tal-Iċċarġjar: Up to 22 kW (adjustable to 11 kW/bar), supporting 3-phase charging.
• Konnettur tal-Iċċarġjar: Integrated 5-meter Type 2 charging cable, compliant with IEC 61851 Mode 3.
• Kontroll tal-Aċċess: RFID function for secure access, preventing unauthorized use. Two user RFID cards are included.
• Ġestjoni tat-Tagħbija: Integrated load management system for optimal current distribution.
• Miter tal-Enerġija: MID-certified energy meter for precise kilowatt-hour billing.
• Durabilità: IP54 protection rating for outdoor use, resistant to dust and splashing water.
• Konnettività: WLAN/LAN connection for installer configuration of load management and service interface.

Figura 1: The TechniSat TECHNIVOLT 2200 Smart Charging Station, showcasing its sleek design and integrated Type 2 charging cable.

Figura 2: The TECHNIVOLT 2200 Smart, highlighting its German manufacturing quality and iF Design Award 2022 recognition.

Figura 3: Detail of the charging station's display and the Type 2 connector, illustrating its capability for fast, 3-phase charging.

4. Setup u Installazzjoni

Installation of the TECHNIVOLT 2200 Smart requires professional expertise. It is crucial that a certified electrician performs the installation to ensure compliance with all electrical safety standards and local regulations.

4.1. Komponenti Inklużi

• TECHNIVOLT 2200 Smart Charging Station
• Front glass pane
• Istruzzjonijiet għall-assemblaġġ
• Manwal għall-utent (dan id-dokument)
• Stensil tal-immuntar
• Mounting kit (4x Fischer SXRL 8 x 60 FUS A4)
• Angle wrench (Torx-TR 20)
• Securing screw for glass pane (Torx-TR 20 M4)
• 2x User RFID cards

4.2. Immuntar

Use the provided mounting stencil and kit to securely attach the charging station to a suitable wall or structure. Ensure the mounting location is stable and can support the weight of the unit (approximately 9.61 kg).

4.3. Konnessjoni Elettrika

The electrical connection must be performed by a qualified electrician. This includes connecting the power supply and ensuring the protective earth (PE) conductor is correctly installed, as per Protection Class I requirements. The WLAN/LAN connection is used by the installer for load management configuration and as a service interface.

5. Istruzzjonijiet Operattivi

5.1. Starting a Charging Process

1. Ensure your electric vehicle is parked safely and the charging port is accessible.
2. Connect the Type 2 charging connector from the TECHNIVOLT 2200 Smart to your vehicle's charging port.
3. Hold one of the registered RFID cards against the RFID reader on the charging station. The charging process will initiate upon successful authentication. The colored light ring on the station will signal charging readiness and the current charging status.

Figura 4: Using an RFID card to activate the charging process, ensuring secure access.

5.2. Stopping a Charging Process

The charging process cannot be stopped directly at the wall box. To stop charging, you must do so directly on your vehicle. During an active charging session, the Type 2 connector is locked and cannot be removed from the vehicle.

5.3. Ġestjoni Dinamika tat-Tagħbija

The integrated dynamic load management system optimizes the distribution of charging current across multiple charging points, ensuring efficient and balanced charging for connected electric vehicles.

Figura 5: Eżample of dynamic load management in action, optimizing charging for multiple vehicles.

5.4. Energy Meter (MID-certified)

The integrated MID-certified energy meter allows for accurate billing of kilowatt-hours. This feature is useful for tracking energy consumption, especially for company vehicles or tenant billing.

Figura 6: The display of the TECHNIVOLT 2200 Smart, indicating energy meter functionality for precise consumption tracking.

6. Manutenzjoni

The TechniSat TECHNIVOLT 2200 Smart is designed for durability and minimal maintenance. Its IP54 rating ensures protection against dust and splashing water, making it suitable for outdoor environments.

• Tindif: Periodically clean the exterior of the charging station with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
• Spezzjoni tal-Cable: Regularly inspect the charging cable and connector for any signs of wear, damage, or fraying. If any damage is observed, discontinue use and contact a qualified technician for repair or replacement.
• Aġġornamenti tas-Software: Ensure the device's software is kept up-to-date. Information on software updates can typically be found on the manufacturer's website or through the installer's service interface.

Figura 7: The TECHNIVOLT 2200 Smart, showcasing its robust design and IP54 protection against environmental elements like rain.

7 Issolvi l-problemi

This section addresses common questions and potential issues:

Q: What does it mean if the LED display shows an alarm?

A: An alarm on the LED display indicates that the relay contacts are overheating due to high currents within the wall box. Contact a qualified technician for inspection.

Q: Can all vehicle models be connected to the Type 2 charging connector?

A: Yes, with the exception of certain Tesla models. Please verify the specific connector type used by your Tesla vehicle.

Q: Is the Type 2 charging connector the latest connector type?

A: Yes, the Type 2 charging connector is widely used across Europe and is considered the current standard.

Q: Why is permanent PE monitoring necessary?

A: PE monitoring continuously checks all contacts of the cable's 5 wires on the wall box, ensuring the integrity of the protective earth connection for safety.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. TechniSat provides support for its products. For technical assistance or service inquiries, please visit the official TechniSat websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Manifattur: TechniSat Digital GmbH

Websit: www.technisat.com (Eżampil-link, il-link attwali jista' jvarja)