Introduzzjoni
The Festool Cordless VECTURO Oscillating Multi-Tool is designed for versatile cutting, sanding, and scraping applications. This manual provides essential information for the safe and efficient operation, maintenance, and care of your tool.
The VECTURO OSC 18 HPC 4,0 EI-Set features a StarlockMax® holding system for quick blade changes, a brushless EC-TEC motor for durability, and vibration isolation for user comfort. It operates on an 18V lithium-ion battery system.
Figura 1: The Festool VECTURO OSC 18 HPC 4,0 EI-Set, including the multi-tool, two 18V battery packs, a rapid charger, various accessories, and a Systainer SYS3 M 187 for storage and transport.
Informazzjoni dwar is-Sigurtà
Always observe general power tool safety guidelines. Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Ilbes tagħmir protettiv personali (PPE) xieraq bħal nuċċalijiet tas-sigurtà, protezzjoni tas-smigħ, u ingwanti.
- Kun żgur li l-biċċa tax-xogħol hija mwaħħla sew qabel l-operazzjoni.
- Keep hands and body parts away from the oscillating blade during operation.
- Skonnettja l-pakkett tal-batterija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda.
- Use only Festool-approved accessories and replacement parts.
Komponenti Inklużi
The Festool VECTURO OSC 18 HPC 4,0 EI-Set includes the following items:
- Vecturo Multi-Tool
- Two BP 18 Li 4.0 Ah HPC-ASI Battery Packs
- TCL 6 Rapid Charger
- OSC-A Adapter
- OSC-AH Position Aid
- OSC-AV Dust Extraction Device
- OSC-TA Depth Stop
- USB 78/32/Bi/OSC Universal Saw Blade
- USB 50/35/Bi/OSC Universal Saw Blade
- HSB 100/Bi/OSC Wood Saw Blade
- Systainer SYS3 M 187
Setup
1. Iċċarġjar u Installazzjoni tal-Batterija
- Insert the battery pack into the TCL 6 Rapid Charger. The charger's indicator light will show the charging status.
- Ladarba tkun iċċarġjata kompletament, neħħi l-batterija mill-ċarġer.
- Align the charged battery pack with the battery slot on the VECTURO Multi-Tool and slide it in until it clicks securely into place.
2. Blade Installation (StarlockMax System)
The VECTURO features a keyless StarlockMax® quick-change system for fast and easy blade replacement.
- Kun żgur li l-batterija tneħħiet mill-għodda.
- Press the green lever on the tool head to release the blade holder.
- Align the desired StarlockMax blade with the holder and press it firmly until it clicks into place.
- Verify the blade is securely attached before use.
Figura 2: Fuq view of the tool demonstrating the StarlockMax blade attachment mechanism.
Figura 3: The VECTURO Multi-Tool with a saw blade securely installed.
3. Accessory Attachment (Dust Extraction, Depth Stop, Position Aid)
Attach optional accessories as needed for specific applications.
- OSC-AV Dust Extraction Device: Slide the dust extraction device onto the tool head until it locks into place. Connect a compatible dust extractor hose for dust-free operation.
- OSC-TA Depth Stop: Attach the depth stop for controlled plunge cuts. Adjust the depth setting according to your requirements.
- OSC-AH Position Aid: Use the position aid for precise guidance during cuts, especially for delicate or intricate work.
Figura 4: Attaching the OSC-AV Dust Extraction Device to the VECTURO Multi-Tool.
Istruzzjonijiet Operattivi
1. Ixgħel/Itfi u Kontroll tal-Veloċità
- To turn the tool on, press the power switch.
- To turn the tool off, release the power switch.
- The brushless EC-TEC motor features variable speed control. Adjust the speed dial to match the material and application for optimal results.
2. Making Cuts
Always ensure the workpiece is stable and secured. Apply gentle, consistent pressure. The tool's vibration isolation system enhances comfort during extended use.
- Qatgħat bil-Qabża: For precise plunge cuts, use the OSC-TA Depth Stop. Position the blade over the desired cutting area and slowly lower the tool into the material.
- Qtugħ Ġenerali: Guide the tool along the cutting line, allowing the blade to do the work. Avoid forcing the tool, which can lead to overheating or damage.
Figura 5: Demonstrating a controlled plunge cut with the VECTURO Multi-Tool.
Figura 6: The VECTURO Multi-Tool performing a cut with the OSC-TA Depth Stop attached for accuracy.
Manutenzjoni
1. Tindif
- After each use, disconnect the battery and clean the tool with a dry cloth.
- Neħħi kwalunkwe trab jew debris mill-fetħiet tal-ventilazzjoni biex tevita li s-sħana tisħon iżżejjed.
- Periodically clean the blade holder mechanism to ensure smooth operation.
2. Sostituzzjoni tax-Xafra
Replace blades when they become dull or damaged to maintain cutting efficiency and safety. Refer to the "Blade Installation" section for detailed steps.
3. Kura tal-batterija
- Aħżen il-pakketti tal-batteriji f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Do not allow battery packs to fully discharge for extended periods. Recharge them regularly.
- If a battery pack is damaged, discontinue use and replace it with an authorized Festool battery.
Issolvi l-problemi
This section addresses common issues you might encounter with your Festool VECTURO Multi-Tool.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tibda | Batterija mhux iċċarġjata jew installata ħażin. | Kun żgur li l-batterija tkun iċċarġjata kompletament u mdaħħla sew. |
| Prestazzjoni fqira tat-tqattigħ | Dull or incorrect blade. Incorrect speed setting. | Replace blade. Select appropriate speed for the material. |
| Vibrazzjoni jew storbju eċċessiv | Blade not properly secured. Damaged blade. | Check blade installation. Replace damaged blade. |
| Għodda żżejjed | Blocked ventilation. Overloading the tool. | Clean ventilation openings. Reduce pressure and allow tool to cool. |
If you encounter issues not listed here or if solutions do not resolve the problem, contact Festool customer support.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Festool |
| Numru tal-Mudell | 576590 |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Voltage | 18 Volts |
| Tip ta 'batterija | Jonju tal-litju (2 inkluża) |
| Tip ta' Mutur | Brushless EC-TEC |
| Blade Holder System | StarlockMax® |
| Piż tal-oġġett | 13.58 pounds (with packaging) |
| Dimensjonijiet tal-Prodott | 15.59 x 11.65 x 7.36 pulzieri |
| Materjal tal-manku | Thermoplastic Elastomers or Plastic |
| Rakkomandazzjoni tal-wiċċ | Wood (compatible with various materials depending on blade) |
| Kulur | Dark Gray Or Black |
Garanzija u Appoġġ
Informazzjoni dwar Garanzija
All Festool power tools, including the VECTURO OSC 18 HPC 4,0 EI-Set, come with a comprehensive 3-year wear-and-tear warranty. This warranty also includes a 2-day standard repair time u a garanzija ta 'sodisfazzjon ta' xahrejn.
For detailed warranty terms and conditions, please refer to the official Festool websit jew ikkuntattja l-appoġġ tal-klijent.
Appoġġ għall-Klijent
For technical assistance, service, or warranty claims, please contact Festool customer support through their official channels. Visit the Ħanut Festool fuq Amazon jew l-uffiċjal tagħhom websit għal informazzjoni ta' kuntatt.
