Headphones KGUSS TOPPING DX3pro+ LDAC AmpManwal ta 'l-Utent aktar ħaj

1. Introduzzjoni

The KGUSS TOPPING DX3pro+ is a high-performance Digital-to-Analog Converter (DAC) and Headphone Amplifier (HPA) designed for high-fidelity audio. It features multiple input options including USB, optical, coaxial, and Bluetooth, along with line out and headphone amplifier outputs. Equipped with an ES9038Q2M DAC chip and XMOS XU208 USB interface, it supports high-resolution audio up to 32-bit/768kHz PCM and DSD512. The integrated NFCA headphone amplifier circuit provides powerful and clean output for various headphones. This manual provides detailed instructions for optimal use.

2. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

DX3pro+ Unit
Adapter tal-Enerġija DC15V/1A
Kontroll mill-bogħod
Cable USB
Antenna Bluetooth
Manwal għall-Utent
Karta ta' Garanzija

Topping DX3pro + LDAC Headphone Amplifier package contents including device, power adapter, remote, USB cable, Bluetooth antenna, user manual, and warranty card.

Figure 2.1: Contents of the DX3pro+ package.

3. Prodott Aktarview

3.1 Panel ta 'Quddiem

Topping DX3pro + LDAC Headphone Ampquddiem tal-lifer view bil-kontroll remot.

Figure 3.1: Front panel of the DX3pro+.

Ħruġ tal-headphones ta' 3.5mm: Qabbad il-headphones tiegħek hawn.
Skrin tal-LED: Displays current status, input, volume, and sampir-rata.
Riċevitur tal-Kontroll mill-bogħod: For receiving signals from the remote control.
Volume Knob / Multi-function Button: Rotate to adjust volume; press to switch inputs or enter settings menu.

3.2 Panel ta 'wara

Topping DX3pro + LDAC Headphone Amplifier rear panel showing RCA, Coaxial, Optical, USB, and Bluetooth antenna connections.

Figure 3.2: Rear panel of the DX3pro+.

RCA Output (Rout, Lout): Right and Left channel single-ended RCA outputs for connecting to an amplifier jew kelliema attivi.
Coaxial SPDIF Input (COAX 1, COAX 2): Two coaxial digital audio inputs.
Optical SPDIF Input (OPTICAL): One optical digital audio input.
USB Input (USB): Connect to a computer or compatible media player for USB DAC functionality.
Bluetooth Antenna (ANT): Connect the provided Bluetooth antenna for wireless audio reception.
Power Input (DC15V): Connect the DC15V/1A power adapter here.

4. Setup

4.1 Konnessjoni tal-Enerġija

Connect the provided DC15V/1A power adapter to the "DC15V" input on the rear panel of the DX3pro+, then plug the adapter into a power outlet. The device will enter standby mode, and the screen will display a bright spot.

Video 4.1: Demonstrates the power connection and initial setup steps for the DX3pro+.

4.2 Konnessjonijiet tal-Input

Connect your audio source devices to the corresponding inputs on the rear panel:

USB: Use the supplied USB cable to connect the DX3pro+ to your computer or a compatible media player. Ensure your device supports OTG external sound card functionality if connecting to a mobile phone or tablet.
Ottiċi/koassjali: Connect digital audio sources such as CD players, game consoles, or TVs using optical or coaxial cables.
Bluetooth: Screw the Bluetooth antenna onto the "ANT" connector. Pair your Bluetooth-enabled device (phone, tablet, laptop) with the DX3pro+ to stream audio wirelessly.

Topping DX3pro+ connected via USB to a mobile phone, illustrating its use as an external DAC.

Figure 4.1: Connecting the DX3pro+ to a mobile device via USB for high-performance DAC functionality.

5. Istruzzjonijiet Operattivi

5.1 Power On/Off and Standby

Qawwa Mixgħul: Connect the power supply. The device will automatically power on and enter standby state, indicated by a bright spot on the screen.
Standby: When the device is working, press and hold the volume knob on the front panel to enter standby state. To exit standby, press the knob again or use the remote control.

5.2 Għażla tal-Input

Press the volume knob on the front panel to cycle through available input channels (USB, OPT, COAX1, COAX2, BT). The selected input will be displayed on the screen.

5.3 Aġġustament tal-Volum

Rotate the volume knob on the front panel to adjust the output volume. The volume can also be adjusted using the remote control.

5.4 Settings tal-Menu

To enter the setup menu, press and hold the volume knob when the power is off, then power up the unit. Rotate the knob to navigate between settings and press to confirm. Press and hold the knob until "8-8" is displayed to save settings.

PCM Filter Setting (F-1 to F-5): Adjust PCM filter characteristics.
Screen Brightness Setting (L-1 to L-3): Aġġusta l-luminożità tal-wiri.
Automatic Standby Setting (A-O, A-C): Enable or disable automatic standby.
Line Out Channel Setting (O-1 to O-3): Select output channel mode (Headphone amp, Headphone amp + Line out, Line Out).
Output Mode Setting (m-P, m-d): Select between Pre-amp mode (volume adjustable) or DAC mode (fixed 2Vrms output).
Headphone Amp Gain (GAIN +6dB, +19dB): Adjust headphone amplifier gain for different headphone sensitivities.
Bluetooth Setting (BT ON, BT OFF): Ippermetti jew tiddiżattiva l-Bluetooth.

Video 5.1: Demonstrates how to navigate and adjust settings in the DX3pro+ menu.

6. Karatteristiċi u Speċifikazzjonijiet

6.1 Karatteristiċi ewlenin

High-performance DAC with USB, optical, coaxial, and Bluetooth inputs.
ES9038Q2M DAC chip for high-resolution audio.
XMOS XU208 for USB input, supporting PCM up to 32-bit/768kHz and native DSD512.
NFCA headphone amplifier circuit with two gain settings (+6dB, +19dB).
Bluetooth 5.0 with LDAC, AAC, SBC, APTX, APTX LL, and APTX HD protocols.
Multiple output modes: Headphone amp, Headphone amp + Line out, DAC, u Pre-ampaktar ħaj.
Digital volume adjustment with no channel imbalance.

Comparison table highlighting differences between Topping DX3pro+ and DX3Pro LDAC version.

Figure 6.1: Key features and improvements of the DX3pro+ model.

6.2 Speċifikazzjonijiet Tekniċi

Speċifikazzjoni	Valur
Brand	KGUSS
Numru tal-Mudell	TOPPING DX3pro+
Dimensjonijiet	16.5cm L x 12.0cm W x 4.0cm H (6.5"L x 4.72"W)
Piż tal-oġġett	420g (0.93 lbs)
Materjal	Aluminju
Provvista Massima Voltage	15 Volts
Tip ta' Interface	Coaxial, USB, Optical, Bluetooth
USB IN (PCM)	44.1kHz-768kHz / 16bit-32bit
USB IN (DSD)	DSD64-DSD512 (Native), DSD64-DSD256 (DoP)
COAX/OPT IN	44.1kHz-192kHz / 16bit-24bit, DSD64 (DoP)
BT IN	AAC/SBC/APTX/APTX LL/APTX HD/LDAC
THD+N @1kHz (A-wt)	<0.00015% (RCA Out), <0.00015% (HP Out @1500mW (32Ω))
SNR @1kHz (A-wt)	122dB (RCA Out), 120dB (HP Out)
Output Power (HP Out)	1800mW x 2 @32Ω THD+N<0.1%, 900mW x 2 @64Ω THD+N<0.1%, 250mW x 2 @300Ω THD+N<0.1%

Detailed technical specifications table for Topping DX3pro+ LDAC Headphone Ampaktar ħaj.

Figure 6.2: Comprehensive technical specifications for the DX3pro+.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your DX3pro+ and provides solutions. For more detailed troubleshooting, refer to the official support resources.

Video 7.1: Official troubleshooting guide for the TOPPING DX3pro+.

Kwistjonijiet Komuni u Soluzzjonijiet:

Fenomenu	Soluzzjoni
Can't be turned on	Iċċekkja l-konnessjoni tal-enerġija. Try with another DC15V power adapter. Try with another power outlet. If the device did not power on, check the power supply.
L-ebda ħoss	Check that the proper input source is selected. Press the knob on the front panel to switch the input channel. Check the output setting. Double-press the knob to switch the output channel. Check the connections for all devices. Insert connection cables all the way in. Check the volume of all devices and whether they are muted. For Bluetooth IN: If volume is too low on phone, adjust the phone's volume. For USB IN: 1) If volume is too low on PC, check and adjust the computer system volume, music player volume, and driver volume. 2) Select the default output device of your music player or computer as this unit.
Daqq storbjuż	Try with other songs. The specifications of songs are not supported by this unit. If the noise appears only when playing DSD files, check and adjust the computer system volume, music player volume, and driver volume to the maximum. Check to see if the problem is with the source, downstream equipment, and cables. If the noise disappears after unplugging the USB cable, it may be interference from the source. Consider using a USB isolation device between this unit and the source.
One channel with noise/no output	Check to see if the problem is with the source, downstream equipment, and cables. Try swapping the left and right channel connections and test with another source.
Channel imbalance	Check to see if the problem is with the source, downstream equipment, and cables. Try swapping the left and right channel connections and test with another source.
Ma tistax tqabbad il-Bluetooth	Enable Bluetooth function in the setup menu first. May be already connected to another Bluetooth device. Press and hold the brightness button in the lower right corner on the remote to let this unit enter pairing mode. Ġib l-apparat Bluetooth qrib din l-unità. Turn the power of the unit off and on again, and then try again.
Bluetooth in: the sound is cut off	Ġib l-apparat Bluetooth qrib din l-unità. Neħħi l-ostakoli bejn l-apparat Bluetooth u din l-unità. To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices, and other Bluetooth devices. Erġa' qabbad l-apparat Bluetooth.
The connected USB device does not recognize this unit	USB cable did not connect properly. Check or change the cable. Try with another USB port. Driver may need to be reinstalled. May be caused by the PC. Check or try with another PC. Xi telefowns jeħtieġu l-funzjoni OTG biex tkun attivata l-ewwel.
Il-kontroll mill-bogħod ma jirrispondix	Try to insert two fresh AAA batteries. Please aim at the remote control receiver. Bring the remote control close to the device. Use your Android phone's camera to look at the transmitter at the top of the remote; if it doesn't blink when you press the remote button, the remote is defective. If you have more than one Topping device, check that you are using the correct remote control.
Is-sample rate displayed on the device does not match the music file	The choice of music player app, the setting of music player, and the setting of computer/phone will all have an impact on the samprata tal-linarda. Is-sampling rate displayed by this unit is the sampling rate of the input signal, and it will not change the sampling rate by itself. If the music player can't be set to exclusive mode, the audio signal will be resampled by the computer/phone, so the sampling rate of the output signal is the sampling rate of the original file, u l-sampling rate displayed by this unit is also the sampling rate of the original file. Because some players can't be set to exclusive mode, the audio signal will be resampled by the computer/phone and then output. So this unit will always display the sampling rate set by the computer/phone. We recommend using Audirvana player on MAC OS and Foobar on Windows OS.
HP -3	Incorrect firmware version. Please re-flash the correct firmware. If the computer does not recognize the unit, try entering DFU mode by pressing the headphone button on the remote control 5 times while the unit is in standby mode. If this does not work, try using another USB port, another USB cable, or even another computer.
DFU	If you accidentally enter DFU mode, unplug and re-plug the power cable and reboot this unit. Try to re-flash the firmware if DFU is still displayed.
HP ERR	Amplifier circuit may output abnormal DC voltage. Please flash the latest firmware first. If you use the RCA output, please switch the output mode to Line out by double-pressing the knob. After changing the song or turning down the volume, unplug and re-plug the power cable and reboot the unit. Disconnect other devices and reboot. If the problem still persists, your unit may be defective.
IN Err / INH Err / INL Err	Provvista voltage too high/too low. Please use TOPPING's power adapter. DAC abnormal. Try using another DC15V power supply. Disconnect other devices and reboot. If the problem still persists, your unit may be defective. Please contact the store where you purchased it.
d-3	Please check whether it is set to DAC mode in the setup menu.
Can't adjust this unit's volume	In PRE (Pre-amplifier) mode, this unit will always display the volume level. When the sampling rata tas-sinjal input bidliet, se juri l-sampling rate for 2 seconds and then continue displaying the volume level. In DAC mode, it will always display the sampling rate, keep the maximum volume output, and the volume is not adjustable.

8. Garanzija u Appoġġ

KGUSS and HIFI College are committed to customer satisfaction. We offer the following support:

Garanzija ta' flus lura ta' 30 jum għal kwalunkwe raġuni.
More than 12-month warranty on all quality defects.
Jappoġġja 30-day price matching.
For any questions or support, please contact HIFI College at HIFICOLLEGE@gmail.com.

HIFI College is an authorized distributor for KGUSS, TOPPING, GUSTARD, and FX-AUDIO/xDuoo products, ensuring authenticity and reliable support.

KGUSS DX3pro+