1. Introduzzjoni
The SYLVANIA Dusk to Dawn A19 LED Light Bulb is designed to provide automatic illumination for both interior and exterior spaces. Featuring a built-in light sensor, these bulbs activate under low-light conditions and deactivate when sufficient ambient light is detected. This functionality eliminates the need for manual switching or timers, enhancing convenience and security around your home. With an estimated lifespan of 15,000 hours, these energy-efficient LED bulbs offer a long-lasting lighting solution.
2. Karatteristiċi tal-prodott
- Integrated Sensor Technology: Automatically turns the light on in low-light conditions and off when light levels increase.
- Applikazzjoni versatili: Suitable for use in hallways, decks, porches, garages, mudrooms, and other indoor or outdoor areas.
- Effiċjenza tal-Enerġija: Designed to replace 60W incandescent bulbs while consuming only 9 watts, reducing electrical costs.
- Ħajja twila: Engineered for durability with a rated life of up to 15,000 hours, equivalent to over 13 years of typical use.
- Dawl abjad artab: Emits a 2700K soft white light with 800 lumens of brightness, providing a warm and inviting ambiance.
- Indiċi Għoli tar-Rendiment tal-Kulur (CRI): An 80 CRI ensures accurate color perception.
3. Istruzzjonijiet ta 'installazzjoni
Follow these steps for safe and proper installation of your SYLVANIA Dusk to Dawn LED light bulb:
- Itfi: Qabel l-installazzjoni, kun żgur li l-enerġija lill-apparat tad-dawl tkun mitfija mis-circuit breaker jew mis-swiċċ tal-ħajt.
- Neħħi l-Bozza Qadima: Ħoll il-bozza tad-dawl eżistenti mill-apparat bir-reqqa.
- Installa Bozza Ġdida: Screw the SYLVANIA Dusk to Dawn LED bulb into the standard E26 medium base socket until it is finger-tight. Do not overtighten.
- Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker jew mis-swiċċ tal-ħajt.
- Tqegħid tas-Sensor: For optimal performance, ensure the light sensor on the bulb is not obstructed and is exposed to ambient light. Avoid placing the bulb in fixtures that might block the sensor or in close proximity to other light sources that could interfere with its operation.
4. Istruzzjonijiet Operattivi
The SYLVANIA Dusk to Dawn LED bulb operates automatically based on ambient light levels:
- Mixgħul Awtomatiku: The built-in light sensor detects when ambient light falls below a certain threshold (e.g., at dusk or in dark conditions) and automatically turns the bulb on.
- Mitfi Awtomatiku: When the sensor detects sufficient ambient light (e.g., at dawn or when other lights are turned on nearby), the bulb will automatically turn off.
- Qawwa Kontinwa: For the automatic function to work, the light fixture's switch must remain in the 'ON' position.
5. Manutenzjoni
SYLVANIA LED bulbs are designed for long-term, maintenance-free operation. However, consider the following for optimal performance:
- Tindif: If necessary, gently wipe the bulb with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Ostruzzjoni tas-Sensor: Periodically check that the light sensor on the bulb is clear of any obstructions (e.g., dirt, leaves, fixture components) that could interfere with its ability to detect light levels.
- Sostituzzjoni: While designed for longevity, if the bulb ceases to function, replace it with a new SYLVANIA Dusk to Dawn LED bulb.
6 Issolvi l-problemi
If you encounter issues with your SYLVANIA Dusk to Dawn LED bulb, refer to the following common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Bulb does not turn on at dusk. | 1. Is-swiċċ tal-enerġija huwa mitfi. 2. Sensor is obstructed or receiving too much light. 3. Bulb is faulty. | 1. Ensure the fixture's power switch is in the 'ON' position. 2. Check for obstructions over the sensor. Relocate if another light source is interfering. 3. Ibdel il-bozza. |
| Bulb does not turn off at dawn. | 1. Sensor is obstructed or not receiving enough light. 2. Bulb is faulty. | 1. Ensure the sensor is clear and exposed to daylight. Remove any obstructions. 2. Ibdel il-bozza. |
| Bulb flickers or dims. | 1. Konnessjoni maħlula. 2. Incompatible dimmer switch (this bulb is non-dimmable). 3. Kwistjoni elettrika. | 1. Turn off power, then re-tighten the bulb. 2. Ensure the bulb is not connected to a dimmer switch. 3. Consult a qualified electrician if the issue persists. |
7. Speċifikazzjonijiet Tekniċi
| Speċifikazzjoni | Valur |
|---|---|
| Numru tal-Mudell | 41257 |
| Tip Dawl | LED |
| Daqs tal-Forma tal-Bozza | A19 |
| Bażi tal-Bozza | E26 Medju |
| Wattage | 9 Watts |
| Ekwivalenti Inkandexxenti | 60 Watts |
| Luminożità | 800 Lumens |
| Temperatura tal-Kulur | 2700 Kelvin (abjad artab) |
| Voltage | 120 Volts |
| Indiċi tar-Rendiment tal-Kulur (CRI) | 80 |
| Ħajja Medja | 15,000 Sigħat |
| Karatteristiċi Speċjali | Energy Efficient, Frosted, Light Sensor, Shatter Resistant |
| Dimmable | Nru |
| Materjal | Plastik |
| Użu fuq ġewwa/barra | Ġewwa |
| UPC | 046135412578 |
8. Garanzija u Appoġġ
This SYLVANIA Dusk to Dawn A19 LED Light Bulb is backed by a standard 3-year warranty. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official LEDVANCE websit.
