1. Introduzzjoni u Fuqview
The RCF ART 935-A is a high-performance digital 2-way active speaker designed for intensive audio applications. It combines advanced transducer technology with a powerful amplifier to deliver exceptional sound quality and versatility.
Figura 1.1: Quddiem view of the RCF ART 935-A active speaker, showcasing its robust black enclosure and front grille.
Il-karatteristiċi ewlenin jinkludu:
- Up to 133 dB Sound Pressure Level
- 2100W Class-D Bi-Amplifikazzjoni
- 45-20000 Hz linear frequency response
- 3" Titanium/Neodymium Compression Driver
- 15" Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Figure 1.2: Close-up of the speaker's internal components, highlighting the 15-inch woofer and the 3-inch compression driver.
The ART 935-A is suitable for use as a stand-alone FOH system speaker, satellite with a subwoofer, stage monitor, or flown installation, offering high performance and reliability in a compact enclosure.
2. Informazzjoni dwar is-Sigurtà
Please read and understand all safety instructions before operating the RCF ART 935-A speaker. Retain this manual for future reference.
- Sigurtà Elettrika: Din l-unità fiha volum għolitage. To prevent electrical shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Sors tal-Enerġija: Qabbad l-ispiker biss ma' provvista tal-enerġija tat-tip deskritt f'dan il-manwal u mmarkat fuq l-unità.
- Korda tal-Enerġija: Ipproteġi l-korda tad-dawl milli timxi fuqha jew maqrusa, partikolarment fil-plakek, ir-reċipjenti tal-konvenjenza, u l-punt fejn joħorġu mill-apparat.
- Ventilazzjoni: Ensure adequate ventilation around the speaker. Do not block any ventilation openings.
- Pjazzament: Place the speaker on a stable, level surface or mount it securely using appropriate rigging hardware. Avoid placing near heat sources or in direct sunlight.
- Protezzjoni tas-Smigħ: Espożizzjoni fit-tul għal livelli għoljin ta’ pressjoni tal-ħoss tista’ tikkawża ħsara permanenti fis-smigħ. Uża protezzjoni xierqa għas-smigħ meta tħaddem l-ispiker b’volumi għoljin.
- Umdità: Tesponix l-ispiker għax-xita jew għall-umdità. Tużax ħdejn l-ilma.
⚠ CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER.
3. Setup
Follow these steps to set up your RCF ART 935-A speaker:
3.1 Disimballaġġ
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. The box should contain: RCF ART 935-A Digital 2-Way Active Speaker, Power Cord, and this User Manual.
3.2 Pożizzjonament Fiżiku u Immuntar
The ART 935-A is designed for versatile placement. It can be used on a pole, flown, wall-mounted, or truss-mounted. Ensure any mounting hardware used is rated for the speaker's weight (approximately 53.2 pounds / 24.2 kg).
Figura 3.1: Ġenb view of the speaker, illustrating its ergonomic design for handling and placement.
Figura 3.2: Qiegħ view, highlighting the integrated pole mount for stand placement.
3.3 Konnessjonijiet
Locate the input/output panel on the rear of the speaker.
Figure 3.3: Rear panel of the speaker, displaying the balanced input/link, volume control, and preset buttons.
- Konnessjoni tal-Enerġija: Connect the supplied power cord to the AC inlet on the rear panel and then to a suitable power outlet.
- Input Awdjo: Use an XLR cable to connect your audio source (mixer, audio interface, etc.) to the "BALANCED INPUT/LINK" XLR input.
- Audio Link (Daisy Chain): If connecting multiple speakers, use an XLR cable from the "BALANCED INPUT/LINK" XLR output to the input of the next speaker.
4. Istruzzjonijiet Operattivi
Once the speaker is set up, you can begin operation.
Figura 4.1: Dettaljat view of the control panel, including the volume control and preset selection.
4.1 Kontrolli u Indikaturi
- Buttuna tal-VOLUM: Adjusts the overall output level of the speaker. Turn counter-clockwise for minimum volume (-∞) and clockwise for maximum volume (MAX).
- Buttuna tal-PRESETS: Cycles through different audio equalization presets.
- LINEARI: Flat frequency response, suitable for general use or when external EQ is applied.
- BOOST: Enhances bass and treble frequencies, often used for music playback.
- STAGE: Optimized for stage monitor applications, reducing low-frequency build-up.
- LED SINJAL: Jixgħel meta jkun hemm sinjal awdjo fl-input.
- LED TA' TAGĦBIJA ŻEJDA: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to prevent distortion.
4.2 Tixgħel/Jitfi
- Ensure the VOLUME knob is set to minimum (-∞).
- Qabbad il-korda tad-dawl.
- Flip the power switch to the "ON" position.
- Gradually increase the VOLUME to the desired level.
- To power off, reduce the VOLUME to minimum, then flip the power switch to "OFF".
5. Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your RCF ART 935-A speaker.
- Tindif: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or waxes. For the grille, a soft brush or vacuum cleaner can be used to remove dust.
- Spezzjoni: Periodically check all cables for damage. Ensure all connections are secure.
- Ħażna: When not in use for extended periods, store the speaker in a dry, cool environment, ideally in its original packaging or a protective case.
- L-ebda Partijiet li jistgħu jservu mill-utent: Do not attempt to open the speaker enclosure. All internal servicing must be performed by qualified RCF service personnel.
6 Issolvi l-problemi
If you encounter issues with your RCF ART 935-A speaker, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output tal-ħoss |
|
|
| Distorted sound / OVERLOAD LED lit |
|
|
| Speaker mhux mixgħul |
|
|
For issues not listed here, or if the problem persists after attempting the solutions, please contact RCF customer support or an authorized service center.
7. Speċifikazzjonijiet
Detailed technical specifications for the RCF ART 935-A Digital 2-Way Active Speaker:
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tal-Mudell | ART935-A |
| Tip ta' Kelliem | 2-Way Active Speaker (Satellite, Woofer) |
| Amplifikazzjoni | 2100W Class-D Bi-Amplification (Peak Power) |
| Dijametru tal-Woofer | 15 Pulzier |
| Dijametru tat-Tweeter | 3 Inches (Titanium/Neodymium Compression Driver) |
| Rispons ta' Frekwenza | 45-20000 Hz (linear) |
| Sound Pressure Level (Max) | Sa 133 dB |
| Teknoloġija tal-Konnettività | XLR (Balanced Input/Link) |
| Metodu ta' Kontroll | Voice (Presets) |
| Kulur | Iswed |
| Dimensjonijiet tal-Prodott (W x H) | 16.34"W x 28.23"Għ |
| Piż tal-oġġett | 53.2 libbra (24.2 Kilogrammi) |
| Tip ta 'Immuntar | Wall Mount, Pole Mount (multiple rigging points) |
| Komponenti Inklużi | RCF ART 935-A Digital 2-Way Active Speaker, Power Cord |
| Karatteristiċi Speċjali | FiRPHASE zero degrees phase technology, Bass Motion Control woofer excursion management |
8. Garanzija u Appoġġ
The RCF ART 935-A Digital 2-Way Active Speaker comes with a RCF 3 Year Limited WarrantyJekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
For technical support, service, or warranty inquiries, please contact RCF customer service or visit the official RCF website. Ensure you have your product model number (ART935-A) and serial number (if applicable, e.g., UDXU01335) ready when contacting support.
The serial number UDXU01335 is located on the rear panel of the speaker, near the input/output connections.
