1. Introduzzjoni
This user manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting Slim Adjustable 30W Wallpack (Model SLIM17FA30ADJ). This high-efficiency LED fixture is designed for outdoor use, offering adjustable light distribution and color temperature options to suit various lighting needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: RAB Lighting Slim Adjustable 30W Wallpack, showcasing its sleek design and light output area.
2. Informazzjoni dwar is-Sigurtà
Always follow basic safety precautions when installing or working with electrical equipment. Failure to do so may result in serious injury or property damage.
- Skonnettja l-Enerġija: Ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or any service.
- Electrician kwalifikat: L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha.
- L-ertjar: Properly ground the fixture to avoid electrical shock.
- Voltage Kompatibilità: Ivverifika li l-provvista voltage hija kompatibbli mal-volum operattiv tal-apparattage (120-277V).
- Integrità tal-Apparat: Do not operate the fixture if it is damaged. Inspect for shipping damage before installation.
- Użu fuq barra biss: Dan il-prodott huwa ddisinjat għal użu barra biss.
3. Setup u Installazzjoni
The SLIM17FA30ADJ wallpack offers field-adjustable features for optimal performance.
3.1 Immuntar
The fixture is designed for wall mounting. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 2.99 lbs).
- Itfi l-enerġija fis-circuit breaker.
- Securely attach the mounting plate to the desired outdoor wall location using appropriate hardware (not included).
- Connect the electrical wiring (line, neutral, ground) from the supply to the fixture's corresponding wires. Ensure all connections are secure and insulated.
- Mount the fixture body onto the mounting plate, ensuring a tight seal to maintain its IP65 rating for protection against dust and water jets.
3.2 Field-Adjustable Color Temperature (CCT)
The SLIM17FA30ADJ features an internal switch to select the desired color temperature (CCT) before sealing the fixture. Options include 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White).
- Before final installation, locate the CCT switch inside the fixture.
- Select the desired color temperature by sliding the switch to the corresponding setting.
- Ensure the switch is firmly in place before closing and sealing the fixture.
3.3 Adjustable Cut-off Angle
The fixture allows for adjustment of the light cut-off angle from full cutoff up to 90° in 15° increments. This feature helps direct light precisely where needed and can ensure Dark Sky compliance when set to 0° (full cutoff).
- Refer to the markings on the fixture for angle adjustments.
- Carefully adjust the internal reflector or light engine mechanism to achieve the desired cut-off angle.
- Test the light distribution after adjustment to confirm the setting.
4. Istruzzjonijiet Operattivi
The RAB Lighting Slim Adjustable Wallpack is designed for efficient and automatic operation.
4.1 Automatic Operation (Photocell)
The integrated photocell automatically controls the fixture's on/off cycles based on ambient light levels. The light will turn on at dusk and turn off at dawn, providing energy savings.
- Ensure the photocell sensor is not obstructed by debris, dirt, or external light sources, as this may affect its operation.
- No manual intervention is typically required for daily operation once installed.
4.2 Funzjonalità tad-Dimming
This fixture supports 0-10V dimming. Connect to a compatible 0-10V dimmer switch (sold separately) for adjustable light output.
- Consult the dimmer switch manufacturer's instructions for wiring and operation.
- Ensure proper wiring of the dimming control wires (purple and gray) to the 0-10V dimmer.
5. Manutenzjoni
The RAB Lighting Slim Adjustable Wallpack requires minimal maintenance due to its durable construction and LED technology.
- Tindif: Naddaf perjodikament il-barra tal-apparat b'ċarruta ratba u damp drapp biex tneħħi l-ħmieġ u l-fdalijiet. Tużax prodotti tat-tindif jew solventi li joborxu.
- Spezzjoni: Spezzjona l-apparat kull sena għal kwalunkwe sinjal ta’ ħsara fiżika, wajers maħlula, jew korrużjoni. Indirizza kwalunkwe problema minnufih.
- Fotoċellula: Keep the photocell sensor clean and free from obstructions to ensure proper automatic operation.
- L-ebda Partijiet li jistgħu jservu mill-utent: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED module.
6 Issolvi l-problemi
If you experience issues with your RAB Lighting Slim Adjustable Wallpack, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx. | No power supply; faulty wiring; photocell obstructed or faulty. | Check circuit breaker/fuse. Verify wiring connections. Clear any obstructions from the photocell. Test photocell function (cover it to simulate darkness). |
| L-apparat jibqa' mixgħul matul il-ġurnata. | Photocell receiving insufficient light; photocell faulty. | Ensure photocell is not obstructed or in a shaded area. Clean photocell sensor. |
| Light output is inconsistent or flickering. | Loose wiring connection; incompatible dimmer (if applicable); internal component issue. | Check all wiring connections. Ensure dimmer is 0-10V compatible. If problem persists, contact customer support. |
| Temperatura tal-kulur mhux korretta. | Is-swiċċ tas-CCT mhux issettjat sew. | Turn off power, open fixture, and verify/adjust the CCT switch setting. |
If troubleshooting steps do not resolve the issue, please contact RAB Lighting customer support.
7. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Brand | Dawl RAB |
| Numru tal-Mudell | SLIM17FA30ADJ |
| Wattage | 30 Watts |
| Voltage | 120-277 volt |
| Tip ta' Sors tad-Dawl | LED |
| Temperatura tal-Kulur (CCT) | Field Selectable: 3000K, 4000K, 5000K |
| Output Lumen | 3540/3813/3768 Lumens (depending on CCT) |
| Effikaċja | Sa 130 lumens għal kull watt |
| Dimming | 0-10V Dimming Standard |
| Klassifikazzjoni tal-Protezzjoni tad-Dħul (IP). | IP65 (Reżistenti għat-trab, protetta kontra l-ġettijiet tal-ilma) |
| Materjal | Precision Die Cast Aluminum |
| Kulur | Bronż |
| Piż tal-oġġett | 2.99 Liri |
| Dimensjonijiet tal-Prodott | 9.25 x 9.06 x 6.5 pulzieri |
| UPC | 192552004435 |
8. Garanzija u Appoġġ
RAB Lighting stands behind the quality of its products.
8.1 Informazzjoni dwar Garanzija
For detailed warranty information, please refer to the official RAB Lighting website or the warranty card included with your product. General warranty terms typically cover defects in materials and workmanship under normal use.
8.2 Appoġġ għall-Klijent
If you have any questions, require technical assistance, or need to report an issue, please contact RAB Lighting customer support:
- Websit: www.rablighting.com
- Telefon: Irreferi għall- websit għal numri ta' kuntatt reġjonali.
- When contacting support, please have your product model number (SLIM17FA30ADJ) and purchase date available.





