1. Introduzzjoni
The Splenssy Heat Alarm Heat Detector is a fixed temperature thermal alarm designed to provide an early warning of fire by detecting abnormal heat levels. It is an A1 level alarm, activating when the ambient temperature reaches between 55°C and 65°C. This battery-powered device emits an 85dB alarm sound upon activation.
This heat alarm is specifically engineered for environments where traditional smoke alarms may be prone to false alarms due to high levels of fumes, smoke, or dust. Ideal locations include kitchens, garages, and boiler houses.
Important Note: This device detects heat only. It does not detect gas, smoke, or flames. It cannot replace smoke alarms and should NOT be installed in escape routes.
Image 1.1: The Splenssy Heat Alarm is designed to protect your family's safety by detecting heat from fires.
2. Informazzjoni dwar is-Sigurtà
Please read all instructions carefully before installation and use to ensure effective operation and safety.
- Post tal-Installazzjoni: Do not install this heat alarm in escape routes. It is not a substitute for smoke alarms in these critical areas.
- Detection Limitations: This device is a heat detector only. It will not detect the presence of gas, smoke, or flames. Ensure appropriate detectors are installed for these hazards if necessary.
- Sigurtà tal-batterija: The device uses a 3V DC Lithium Battery. Do not attempt to recharge, disassemble, heat above 100°C (212°F), or incinerate the battery. Risk of fire and burns. Do not mix fresh batteries with used batteries or other battery types.
- Manutenzjoni: Regularly test the alarm as per the instructions to ensure proper functionality.
3. Prodott Aktarview
The Splenssy Heat Alarm is a compact, white, square-shaped device designed for discreet installation. It features a thermistor heat sensing element for accurate and stable temperature detection.
Stampa 3.1: Quddiem view of the Splenssy Heat Alarm.
Komponenti:
- Heat Sensing Element: Thermistor for precise temperature monitoring.
- Buttuna tat-test: Allows for manual testing of the alarm's functionality.
- Indikatur tal-Allarm: Visual indicator (e.g., LED) that illuminates during alarm or test.
- Kompartiment tal-batterija: Located on the rear for battery installation.
Image 3.2: The thermistor heat sensing element ensures accuracy, reliability, and stability.
4. Setup u Installazzjoni
Choosing an Installation Location:
Select a location where the risk of fire is high due to heat, but where smoke alarms are impractical due to normal levels of fumes or dust. Recommended locations include:
- Kċejjen
- Garaxxijiet
- Boiler Houses
Avoid installing in escape routes or areas where the temperature frequently exceeds 65°C or drops below 55°C under normal conditions.
Image 4.1: The heat alarm is suitable for various indoor areas such as homes, offices, and factories.
Installazzjoni tal-batterija:
The device is powered by a 3V DC Lithium Battery with an estimated 5-year lifespan. To install or replace the battery:
- Sib il-kompartiment tal-batterija fuq wara tal-unità.
- Iftaħ l-għatu tal-kompartiment.
- Insert the 3V DC Lithium Battery, ensuring correct polarity (+/-).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Stampa 4.2: Wara view showing the battery compartment and low battery warning indicator.
Immuntar tal-Apparat:
While specific mounting hardware is not detailed, typically heat alarms are mounted on ceilings or high on walls. Refer to the packaging for any included mounting brackets or screws.
- Kun żgur li l-wiċċ tal-immuntar ikun nadif u niexef.
- Securely attach the mounting bracket (if applicable) to the chosen location.
- Attach the heat alarm to the bracket or directly to the surface as instructed.
5. Istruzzjonijiet Operattivi
Operazzjoni normali:
Once installed with a functional battery, the heat alarm continuously monitors the ambient temperature. It remains silent during normal operating conditions.
Attivazzjoni ta' Allarm:
The alarm will activate and emit an 85dB sound when the temperature at the sensor reaches between 55°C and 65°C. The alarm indicator will also illuminate.
Image 5.1: The 85dB sound alarm is powerful enough to alert occupants during emergencies.
Ittestjar tal-allarm:
It is recommended to test the alarm weekly to ensure it is functioning correctly.
- Press and hold the test button located on the front of the unit.
- The alarm should sound loudly (85dB) and the indicator light should activate.
- Itlaq il-buttuna. L-allarm għandu jieqaf.
Jekk l-allarm ma jdoqqx waqt l-ittestjar, irreferi għat-taqsima tas-Soluzzjoni tal-Problemi.
Twissija ta' Batterija Baxxa:
The device supports a 30-day low battery warning. When the battery is low, the alarm will emit a periodic chirp or visual signal to indicate that the battery needs replacement.
6. Manutenzjoni
Sostituzzjoni tal-batterija:
Replace the battery immediately when the low battery warning is activated. Follow the battery installation steps in Section 4. Use only a new 3V DC Lithium Battery.
Tindif:
Dust and debris can affect the performance of the heat alarm. Clean the exterior of the unit regularly (e.g., monthly) using a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Do not paint the alarm.
Ittestjar regolari:
Perform a weekly test of the alarm as described in Section 5 to ensure it is in proper working order.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-allarm ma jdoqqx waqt it-test. | Batterija mejta jew installata ħażin. | Check battery polarity. Replace battery with a new 3V DC Lithium Battery. |
| L-allarm idoqq perjodikament. | Twissija ta 'batterija baxxa. | Ibdel il-batterija immedjatament. |
| Alarm sounds without apparent fire. | High ambient temperature (above 65°C). | Verify the ambient temperature. If consistently high, consider relocating the alarm to an area within its operating temperature range. |
8. Speċifikazzjonijiet
- Ditta: Splenssy
- Mudell: GABLE 5Y
- Sors tal-Enerġija: 3V DC Lithium Battery (5-year lifespan)
- Temperatura tat-Tħaddim: CLASS A1, 55°C-65°C (131°F-149°F)
- Umdità ambjentali: 10% -90% RH (mhux kondensazzjoni)
- Livell tal-Qarn: 85 Decibels at 3 meters
- Kulur: Abjad
- Piż tal-oġġett: Madwar 2.08-il uqija (59 gramma)
- Dimensjonijiet tal-pakkett: Madwar 3.03 x 2.44 x 2.44 pulzieri (7.7 x 6.2 x 6.2 cm)
Image 8.1: Key specifications of the Splenssy Heat Alarm.
9. Garanzija u Appoġġ
Specific warranty information for the Splenssy Heat Alarm Heat Detector is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the manufacturer or your point of purchase directly.
You may find contact information on the product packaging or by visiting the official Splenssy websit.
