Manwal tal-Utent tal-Iskaner tal-Films u Slajds Plustek OpticFilm 8200i Ai

1. Introduzzjoni

The Plustek OpticFilm 8200i Ai is a high-resolution film and slide scanner designed for converting 35mm negatives and slides into digital images. It features a built-in infrared channel for dust and scratch removal, IT8 calibration for accurate color reproduction, and is bundled with SilverFast Ai Studio 8 software for advanced image processing.

Image 1.1: Plustek OpticFilm 8200i Ai scanner and included accessories.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett qabel ma tipproċedi bis-setup:

• Plustek OpticFilm 8200i Ai Scanner
• SilverFast Ai Studio 8 Software (License Key/Download Information)
• IT8 Calibration Target (ISO 12641-1 compliant 1997)
• 35mm Negative Film Stripe Holders (8 pieces)
• Cable USB
• Adapter tal-Enerġija
• Gwida Quick Start

Image 2.1: Included 35mm Negative Film Holders.

3. Setup

3.1. Rekwiżiti tas-Sistema

Kun żgur li l-kompjuter tiegħek jissodisfa r-rekwiżiti minimi tas-sistema:

• Operating System: Windows 7/8/10/11 or Mac OS 10.7.x ~ 11.x (Big Sur)
• Port USB Disponibbli
• Sufficient Hard Disk Space for Software and Scanned Images

3.2. Installazzjoni tas-softwer

1. Download the latest drivers and SilverFast Ai Studio 8 software from the official Plustek websit (www.plustek.com).
2. Run the installer for the drivers first, following the on-screen instructions.
3. Install SilverFast Ai Studio 8. You will need to register your software using the provided license key.

3.3. Konnessjoni tal-Ħardwer

1. Qabbad l-adapter tal-enerġija mal-iskaner u mbagħad ma' sokit tal-enerġija.
2. Connect the USB cable to the scanner and then to an available USB port on your computer.
3. Power on the scanner using the power button. The indicator light should illuminate.

3.4. IT8 Calibration

For optimal color accuracy, perform IT8 calibration using the included IT8 target and SilverFast software. This process ensures consistent and accurate color reproduction.

Image 3.1: IT8 calibration process for accurate color results.

4. Istruzzjonijiet Operattivi

4.1. Tagħbija ta' Film u Slajds

1. Open the appropriate film holder (35mm negative or slide holder).
2. Carefully place your film strips or mounted slides into the designated slots, ensuring they are flat and correctly oriented.
3. Agħlaq id-detentur tal-film sew.
4. Insert the loaded film holder into the scanner's film slot.

4.2. Scanning Process with SilverFast Ai Studio 8

Launch SilverFast Ai Studio 8 software on your computer.

Image 4.1: Scanner front panel featuring IntelliScan and QuickScan buttons.

1. Preview Skennja: Initiate a preview scan within SilverFast to see a low-resolution version of your film/slide. This allows for cropping and initial adjustments.
2. Aġġusta Settings: Utilize SilverFast's tools for color correction, exposure adjustment, and other enhancements.
3. iSRD (Infrared Dust & Scratch Removal): Activate the iSRD feature. The scanner's built-in infrared channel detects and removes dust and scratches from the film surface, significantly reducing the need for manual retouching.


Image 4.2: Illustration of iSRD technology for defect removal.

4. HDRi (High Dynamic Range Imaging): Enable HDRi to capture 64-bit RAW data, including information from the infrared channel. This provides maximum detail and dynamic range for post-processing.


Image 4.3: SilverFast interface demonstrating HDRi 64-bit RAW data capture.

5. 16-bit Histogram: Use the 16-bit histogram tool for precise adjustment of black point, white point, and midtones, ensuring optimal tonal range in your scans.


Immaġni 4.4: Eż.amples of 16-bit histogram adjustments in SilverFast.

6. Final Scan: Once settings are optimized, initiate the final high-resolution scan. Save your digital images in your preferred format.

4.3. Using IntelliScan and QuickScan Buttons

The scanner features two front panel buttons for quick operations:

• IntelliScan: Configurable through SilverFast, this button can be assigned to perform a specific scanning task or open the SilverFast software.
• QuickScan: Also configurable, this button can be set to perform a quick scan with predefined settings or launch a specific application.

5. Manutenzjoni

5.1. Tindif tal-Iskaner

• Ensure the scanner is powered off and unplugged before cleaning.
• Uża ċarruta ratba u mingħajr ħelu dampened with water or a mild, non-abrasive cleaner to wipe the exterior.
• For the film path and glass surfaces, use a specialized lens cleaning cloth and solution to avoid scratches and residue. Do not spray cleaner directly onto the scanner.
• Use a can of compressed air to remove dust from the film slot and internal areas.

5.2. Film Holder Care

Keep film holders clean and free of dust or debris, as these can transfer to your film and affect scan quality. Store them in a clean, dry place when not in use.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

• Tip ta' Skaner: Film (35mm negatives and slides)
• Isem tal-Mudell: 8200i Ai
• Riżoluzzjoni ottika: 7200 dpi
• Teknoloġija tal-Konnettività: USB (infrared channel for iSRD)
• Fond tal-Kulur: 24 bpp (up to 64-bit HDRi RAW data)
• Teknoloġija tas-Sensor ottiku: CMOS
• Software miġbura: SilverFast Ai Studio 8
• Kalibrazzjoni: IT8 Calibration Target included
• Sistemi Operattivi Appoġġjati: Windows 7/8/10/11, Mac OS 10.7.x ~ 11.x

8. Garanzija u Appoġġ

For warranty information, technical support, and driver downloads, please visit the official Plustek website or contact Plustek customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Plustek Websit: www.plustek.com