1. Prodott Aktarview
The GOOLOO GT4000S is a powerful and versatile jump starter power bank designed to provide emergency starting power for vehicles and charge various electronic devices. It features a high peak current, intelligent safety clamps, and a user-friendly display.
Image: GOOLOO GT4000S Jump Starter Power Bank with smart clamps mehmuża.
- Quick Start Capability: Ready to jump start a vehicle after 5 minutes of charging. A full charge supports up to 60 jump starts.
- Prestazzjoni qawwija: 4000A peak current, capable of starting all gasoline engines and diesel engines up to 10.0L.
- Skrin LCD kbir: A 3.2-inch display shows real-time battery status and operational readiness.
- Multi-functional Device: Functions as a jump starter, power bank for portable devices, and features an integrated LED flashlight.
- Standby Estiż: Maintains charge for up to 24 months, thanks to 10 patented safety protections (Supersafe Technology).
- Disinn Durabbli: IP65 waterproof rating for protection against rain and dust.
2. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok aqra u ifhem l-informazzjoni kollha dwar is-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.
- Kompatibbiltà tal-Vettura: Use only for 12V vehicles. Do not attempt to jump start vehicles with different voltagsistemi e.
- Sigurtà Personali: Wear eye protection and gloves when operating the jump starter. Do not touch the positive and negative clamps flimkien.
- Ventilazzjoni: Ensure adequate ventilation when jump starting a vehicle. Batteries can produce explosive gases.
- Tfal u Pets: Żomm l-apparat fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
- Ħażna: Store the jump starter in a cool, dry place away from direct sunlight, heat sources, and flammable materials.
- Ħsara: Do not use the device if it is damaged, cracked, or has exposed wires. Contact support for assistance.
- Iċċarġjar: Use only the provided charging cables and compatible chargers. Do not overcharge or leave unattended while charging.
Image: Diagram illustrating the 10 integrated safety protections, including AI software monitoring, reverse-polarity, over-charge, over-voltage, spark-proof, short-circuit, high and low-temp, over-current, over-load, and reverse-charge protection.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- GOOLOO GT4000S Jump Starter Power Bank
- Smart Jumper Cables with Clamps
- USB-C għal USB-C Cable
- USB-A għal USB-C Cable
- Ċarġer tal-Karozza DC 12V
- Borża tal-Ħażna
- Manwal għall-Utent
Image: The GOOLOO GT4000S jump starter, smart jumper cables, USB-C cables, 12V car charger, storage bag, and user manual.
4. Product Features and Ports
Familiarize yourself with the device's components and connection points.
Image: Labeled diagram showing the BOOST button, 12V Jump Starter Port, 15V/10A DC Port, 5V/2.4A Output Port, 5V/9V/12V Output Port, USB-C 100W Input & Output, and Power Switch.
Image: Close-up of the 3.2-inch LED screen displaying indicators for Battery Level, Low Current Mode, Reverse Battery Clamps, Low Temperature Reminder, Ready to Start, and Charging Power.
5. Iċċarġjar tal-Jump Starter
Before initial use, fully charge the GOOLOO GT4000S. It supports 100W two-way fast charging.
- Connect the provided USB-C cable to the USB-C Input/Output port on the jump starter.
- Connect the other end of the USB-C cable to a compatible 100W USB-C wall charger (not included) or the 12V car charger.
- The LCD screen will display the charging status. A full charge typically takes 1.2 hours with a 100W charger.
- For quick jump-starting, a 5-minute charge can provide enough power to start a vehicle.
Image: The GOOLOO GT4000S jump starter connected to a car's 12V outlet for 100W two-way fast charging.
6. Istruzzjonijiet Operattivi
6.1. Startjar ta' Vettura b'Avvanz
Follow these two simple steps to jump start your 12V vehicle:
- Qabbad: Insert the smart jumper cable plug into the 12V Jump Starter Port on the GOOLOO GT4000S. Connect the red positive (+) clamp to the positive (+) terminal of the vehicle's battery and the black negative (-) clamp to the negative (-) terminal of the vehicle's battery. Ensure a secure connection. The LCD screen should display "READY" if connected correctly.
- Ibda: Once "READY" is displayed, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive jump starts.
- Skonnettja: After the vehicle starts, immediately remove the clamps from the vehicle battery terminals, then disconnect the smart jumper cable from the jump starter.
Image: The GOOLOO GT4000S jump starter connected to a car battery, ready to start a 12V vehicle in seconds.
Image: A visual representation of the two simple steps: 1. Connect the clamps, 2. Press the start engine button.
6.2. Użu bħala Power Bank
The GOOLOO GT4000S can charge various electronic devices:
- USB-C 100W Input & Output: Use this port with a USB-C to USB-C cable to charge laptops, tablets, and smartphones that support USB Power Delivery (PD) up to 100W.
- USB-A 5V/2.4A Output: For standard USB charging of smartphones, tablets, and other small electronics.
- USB-A 5V/9V/12V Output: For Quick Charge compatible devices.
- 15V/10A DC Output: Can power 12V DC devices such as tire inflators or car vacuums (requires a compatible DC adapter, not included).
Image: The GOOLOO GT4000S charging a laptop and a smartphone simultaneously, demonstrating its power bank functionality.
6.3. L-użu tat-Torċa LED
Il-flashlight LED integrata toffri tliet modi:
- Normali: Provides continuous illumination.
- SOS: Emits the international Morse code signal for distress (three short, three long, three short flashes).
- Strobe Produces rapid flashes for signaling or attracting attention.
To activate the flashlight, press and hold the power button. Press again to cycle through the modes. Press and hold to turn off.
Image: The GOOLOO GT4000S jump starter with its LED flashlight illuminated, demonstrating its utility in outdoor or emergency situations.
7. Manutenzjoni u Ħażna
Proper maintenance ensures the longevity and performance of your GOOLOO GT4000S.
- Iċċarġjar mill-ġdid: While the device boasts a 24-month standby time, it is recommended to check the battery level periodically and recharge it if it drops below 50%.
- Tindif: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Ħażna: Store the jump starter in its protective bag in a cool, dry place between 0°C and 45°C (32°F and 113°F). Avoid extreme temperatures and direct sunlight.
- Reżistenza għall-Ilma: The IP65 rating provides protection against splashes and dust, but do not submerge the device in water.
Image: The GOOLOO GT4000S jump starter highlighting its 24-month standby capability, indicating long-term charge retention.
Image: The GOOLOO GT4000S jump starter with water droplets, illustrating its IP65 waterproof and dustproof rating.
8 Issolvi l-problemi
If you encounter issues with your GOOLOO GT4000S, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx. | Il-batterija hija skarikata kompletament. | Charge the device using the provided USB-C cable and a compatible charger. |
| "READY" not displayed on screen after connecting to car battery. | Inkorretta clamp connection (reverse polarity) or poor connection. | Kun żgur li l-klamp aħmar ikun lest.amp huwa fuq pożittiv (+) u cl iswedamp on negative (-). Clean battery terminals if corroded. Reconnect securely. |
| Il-vettura ma tixgħelx wara tentattiv ta' qabża. | Jump starter battery low, vehicle battery severely discharged, or other vehicle issues. | Ensure jump starter is sufficiently charged. Wait 30 seconds and try again (max 3 attempts). If still unsuccessful, consult a mechanic. |
| Device gets warm during use or charging. | Normal operation under heavy load. | This is normal. If it becomes excessively hot or emits smoke/odor, discontinue use immediately and contact support. |
| Screen displays "Low Temperature Reminder" icon. | Operating temperature is too low for optimal performance. | Bring the device to a warmer environment and allow it to reach operating temperature before use. |
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | GOOLOO |
| Mudell | GT4000S (JS-271) |
| L-ogħla Kurrenti | 4000A |
| Kompatibilità tal-Magna | All Gasoline Engines, up to 10.0L Diesel Engines |
| Tip ta 'batterija | Polimeru tal-litju |
| Dimensjonijiet (L x W x H) | 51 x 29 x 27 cm (Product); 2 Kilograms (Weight) |
| Input/Output USB-C | Twassil tal-Enerġija ta' 100W (PD) |
| Output USB-A 1 | 5V/2.4A |
| Output USB-A 2 | 5V/9V/12V Quick Charge |
| Produzzjoni DC | 15V/10A |
| Tip ta 'Dawl LED | LED (Normal, SOS, Strobe modes) |
| Klassifikazzjoni li ma jgħaddix ilma minnha | IP65 |
| Ħin ta' Standby | Sa 24 Xhur |
10. Garanzija u Appoġġ
GOOLOO provides comprehensive support for its products.
- Garanzija: The GOOLOO GT4000S comes with an 18-month warranty.
- Appoġġ għall-Klijent: Lifetime customer and technical support is available.
- Kuntatt: For any questions, issues, or warranty claims, please refer to the contact information provided in the product packaging or on the official GOOLOO websit.
Image: GOOLOO customer support details, including 24-hour support, 30-day return guarantee, 18-month warranty, and lifetime technical support.
