Theefun 2500CFM Fog Machine with 9 LED Lights User Manual

Introduzzjoni

This manual provides detailed instructions for the safe and effective operation of your Theefun 2500CFM Fog Machine with 9 LED Lights. Please read this manual thoroughly before initial use and retain it for future reference. This fog machine is designed to produce atmospheric fog effects for various events, including parties, stages, and special occasions, enhanced by integrated LED lighting.

Informazzjoni dwar is-Sigurtà

• Għall-Użu fuq ġewwa u fuq barra: Kun żgur li l-magna titqiegħed fuq wiċċ stabbli u livell.
• Fog Fluid: Use only high-quality, water-based fog fluid specifically designed for fog machines. Do not use flammable liquids or other substitutes. Fog fluid is not included.
• Ventilazzjoni: Ensure adequate ventilation around the machine to prevent overheating. Do not block air vents.
• Uċuħ sħan: The nozzle and surrounding areas become very hot during operation. TMESSX the nozzle or machine housing during or immediately after use. Allow sufficient time for cooling.
• Sigurtà Elettrika: Qabbad il-magna ma' sokit tal-enerġija ertjat bil-volum korretttage (AC 100-200V/60Hz or AC 220V-240V/50Hz). Do not overload electrical circuits.
• Żomm 'il bogħod mit-Tfal: Dan il-prodott mhuwiex ġugarell. Żomm fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
• Protezzjoni mis-sħana żejda: The machine is equipped with overheat protection. If the temperature becomes too high, it will automatically cut off power. Allow the unit to cool down for a few minutes before resuming operation.
• Livell Likwidu: Monitor the fog fluid level. Operating the machine without sufficient fluid can cause damage.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Theefun Fog Machine Unit
• Kontroll mill-bogħod mingħajr fili
• Kejbil tal-Enerġija
• Manwal għall-Utent (dan id-dokument)

Prodott Overview

Familiarize yourself with the components of your fog machine:

Deskrizzjoni tal-Immaġni: A labeled diagram of the Theefun Fog Machine. Key components identified include the carrying handle, the liquid tank, the fog outlet with 9 LED lights surrounding it, the main ON/OFF power switch, the dedicated Fog button, the power socket with fuse protection, and an oil level indicator for the fog fluid tank.

• Manku: Għal portabbiltà faċli.
• Tank: Reservoir for fog fluid (500ml capacity).
• Fog Outlet: Where fog is emitted.
• 9 LEDs: Integrated lights around the fog outlet for color effects.
• Buttuna ON/OFF: Swiċċ tal-qawwa prinċipali għall-unità.
• Buttuna taċ-ċpar: Manual button to activate fog output.
• Socket tal-Enerġija: Connection point for the power cable, includes fuse protection.
• Livell taż-Żejt: Indicator to monitor the amount of fog fluid in the tank.

Setup Istruzzjonijiet

Segwi dawn il-passi għas-setup inizjali:

1. Pjazzament: Place the fog machine on a flat, stable, and heat-resistant surface. Ensure there is clear space around the machine for proper ventilation and fog dispersion.
2. Imla l-Likwidu taċ-Ċpar: Unscrew the cap of the liquid tank and carefully pour appropriate fog fluid into the tank. Ensure the metal nozzle inside the tank is fully immersed in the fluid. Do not overfill.
3. Qabbad l-Enerġija: Insert the power cable into the power socket on the back of the machine, then plug the other end into a suitable grounded electrical outlet.
4. Qawwa Mixgħul: Flip the main ON/OFF switch to the 'ON' position. The machine will begin to preheat. The initial warm-up time is approximately 3-5 minutes. Subsequent warm-ups will take 1-2 minutes.
5. Stenna sakemm tkun lest/a: The machine is ready for operation once the preheating cycle is complete.

Deskrizzjoni tal-Immaġni: A visual guide illustrating the setup process. Step 1 shows pouring fog liquid into the tank. Step 2 depicts connecting the power cable and turning on the main switch. Step 3 indicates the preheating time. Step 4 shows pressing the 'ON' button on the remote to activate fog output.

Istruzzjonijiet Operattivi

The Theefun Fog Machine can be operated using the included wireless remote control.

Deskrizzjoni tal-Immaġni: The wireless remote control for the fog machine, displaying buttons for fog activation and LED light control. Below, a grid of images shows the fog machine emitting fog in various colors, demonstrating the 12 color options and 3 color modes.

Funzjonijiet tal-Kontroll mill-bogħod:

• FOG ON/OFF: Press the 'FOG ON' button to initiate fog output. Press 'FOG OFF' to stop. The machine will spray for 20-30 seconds, then automatically preheat again. You must press the 'FOG ON' button after each preheating cycle to continue fog output.
• LED ON / OFF: Press the 'LED ON' button to turn on the LED lights. Press 'LED OFF' to turn them off.
• Modi tal-Kulur: The remote allows you to switch between 12 single-color modes, 2 color-changing modes, and a white flashing mode. Refer to the remote control for specific color buttons.

Operazzjoni Ġenerali:

• Once the machine has preheated, press the 'FOG ON' button on the remote. Fog will be emitted from the nozzle.
• Select your desired LED light color or mode using the corresponding buttons on the remote.
• Monitor the fog fluid level during extended use. Refill as necessary to prevent damage.

Manutenzjoni

Proper maintenance ensures the longevity and optimal performance of your fog machine.

• Tindif: After every 40 hours of continuous operation, or if the machine shows signs of reduced output, it is recommended to run a cleaning solution through the system. Use a commercially available fog machine cleaning solution or a mixture of 80% distilled water and 20% white vinegar. Run this solution through the machine for 10-15 minutes in a well-ventilated area.
• Tindif ta' barra: Wipe the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter internal components.
• Ħażna: When not in use, ensure the machine is completely cool and drained of any remaining fog fluid. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Sostituzzjoni tal-fjus: If the machine does not power on, check the fuse located near the power socket. Replace with a fuse of the same type and rating if necessary.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Deskrizzjoni tal-Immaġni: The Theefun Fog Machine displayed alongside a table of its technical specifications. The table details Voltage, Power, Tank Capacity, Warm Up Time, Remote Distance, and Output, providing a quick reference for the product's capabilities.

Garanzija u Appoġġ

Theefun products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Theefun websit. Jekk jogħġbok żomm il-mudell tal-prodott tiegħek u d-data tax-xiri disponibbli meta tikkuntattja l-appoġġ.