Prodott Overview
Il-Blukar LED Headlamp is a versatile and powerful lighting solution designed for various activities such as running, hiking, camping, and emergency use. It features a super bright COB LED, multiple lighting modes, motion sensor control, and a rechargeable battery, all within a lightweight and waterproof design.
Figure 1: Blukar LED Headlamp, wirjaasing id-disinn kompatt tiegħu u ċ-ċinga aġġustabbli.
Figura 2: Aktarview of key features including Super Brightness, IPX5 Waterproofing, 6 Lighting Modes, 45° Adjustable angle, USB Charging, and Motion Sensor.
Setup u Iċċarġjar
Qabel l-ewwel użu, iċċarġja r-ras kompletamentamp. The built-in 1200mAh battery provides extended usage time.
Istruzzjonijiet għall-iċċarġjar:
- Sib il-port tal-iċċarġjar USB-C fuq ir-rasamp.
- Qabbad il-kejbil USB-C provdut mar-rasampIl-port tal-iċċarġjar ta'.
- Connect the other end of the USB-C cable to a compatible power source such as an AC charger, power bank, or computer USB port.
- A charging indicator light will illuminate. The headlamp typically takes 2-3 hours to fully charge.
Figura 3: Ir-rasamp can be conveniently charged via various USB power sources, including AC chargers, power banks, and computers.
Video 1: Demonstrates the charging process and various features of the Blukar Headlamp, including its brightness, different light modes, and motion sensor functionality. (Duration: 1 minute 3 seconds)
Istruzzjonijiet Operattivi
Il-Kap Blukaramp offers 6 lighting modes and a motion sensor for hands-free operation.
Modi tad-Dawl:
Press the power button to cycle through the conventional lighting modes:
- Strong White Light: Luminożità massima għal viżibilità ċara.
- Weak White Light: Reduced brightness for general use and battery saving.
- Strong Red Light: Preserves night vision and is less disruptive to others.
- Strobe Red Light: For signaling or emergency situations.
Figure 4: Visual representation of the six available lighting modes, including High Light, Low Light, Red Light, Strobe (SOS), Sensor Mode (White), and Sensor Mode (Red).
Kontroll tas-Sensor tal-Moviment:
Il-kapamp features two induction modes for hands-free control:
- Strong White Induction Mode: Wave your hand in front of the headlamp to turn the strong white light on or off.
- Strong Red Induction Mode: Wave your hand in front of the headlamp to turn the strong red light on or off.
To activate the motion sensor modes, press the dedicated motion sensor button. Wave your hand approximately 5-10 cm (2-4 inches) in front of the sensor to toggle the light.
Figure 5: A user demonstrating the motion sensor switch, showing how a simple hand wave can turn the headlamp on or off, useful when hands are occupied or dirty.
Angolu aġġustabbli:
Il-kapamp base can be adjusted up to 45 degrees, allowing you to direct the light precisely where needed. This is particularly useful for tasks requiring focused illumination or when navigating uneven terrain.
Figura 6: Ir-rasamp is lightweight (only 76g) and features an easy-adjustable, high-elastic, breathable headband for comfortable wear during extended periods.
Manutenzjoni
- Tindif: Imsaħ il-headlamp b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Ħażna: Aħżen il-headlamp f'post frisk u niexef 'il bogħod mid-dawl tax-xemx dirett u temperaturi estremi.
- Kura tal-batterija: To prolong battery life, avoid fully discharging the battery frequently. Recharge the headlamp regularly, even if not in use for extended periods.
- Reżistenza għall-Ilma: Il-kapamp is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. Do not submerge the headlamp fl-ilma.
Figura 7: Ir-rasamp demonstrating its IPX5 waterproof rating, suitable for use in rainy conditions or splashes.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Kapamp ma jixgħelx. | Il-batterija hija eżawrita. | Iċċarġja l-headlamp bis-sħiħ. |
| Id-dawl jitteptep jew huwa baxx. | Low battery or in sensor mode. | Recharge the battery. If in sensor mode, press the power button to exit. |
| Is-senser tal-moviment mhux qed jirrispondi. | Sensor mode not activated or obstruction. | Ensure sensor mode is active. Clear any obstructions in front of the sensor. Wave hand within 5-10 cm. |
| L-iċċarġjar mhux qed jaħdem. | Kejbil jew sors tal-enerġija difettuż. | Try a different USB-C cable or power adapter. Ensure the cable is securely connected. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | K9112 |
| Tip ta' Sors tad-Dawl | LED (COB Technology) |
| Luminożità | 2000 Lumens |
| Kapaċità tal-batterija | Polimeru tal-litju 1200mAh (Inkluż) |
| Runtime | Sa 30 sigħat |
| Ħin tal-Iċċarġjar | 2-3 sigħat (madwar) |
| Interface tal-iċċarġjar | USB-C |
| Reżistenza għall-Ilma | IPX5 Waterproof |
| Piż | 79 Gram (2.79 uqija) |
| Materjal | ABS |
| Dimensjonijiet (madwar) | 2.36"D x 1.57"W x 5.91"H |
| Angolu aġġustabbli | 45 grad |
Garanzija u Appoġġ
Blukar products are designed for reliability and performance. For any questions, concerns, or warranty claims, please contact Blukar customer support.
- Manifattur: Blukar
- Informazzjoni ta' Kuntatt: Refer to the product packaging or the official Blukar webis-sit għad-dettalji ta' appoġġ l-aktar aġġornati.
Figure 8: Back of the product packaging, showing manufacturer details and contact information.
Figure 9: Inside flap of the product packaging, displaying important safety warnings in multiple languages.
