Introduzzjoni
Grazzi tax-xiriasing the BLUEJAY Transform RC Car Robot. This manual provides essential information for the safe and optimal operation of your new remote control transforming vehicle. Please read it thoroughly before use and retain it for future reference.
Image: The BLUEJAY Transform RC Car Robot shown in its car and robot configurations, alongside its remote control.
Informazzjoni dwar is-Sigurtà
- Żomm il-prodott 'il bogħod minn fjammi mikxufa jew sorsi diretti ta' sħana.
- Adult supervision is recommended for children operating the toy.
- Do not attempt to modify or disassemble the product, as this may cause damage or injury.
- Ensure the play area is clear of obstacles to prevent collisions and damage.
X'hemm fil-Kaxxa
Ivverifika li l-komponenti kollha huma preżenti meta tiftaħ il-kaxxa:
- 1 x RC Transform Car
- 1 x Kontrollur mill-bogħod
- 1 x tornavit
- 1 x Car Battery (Rechargeable Lithium Polymer)
- 1 x Car Battery Charging Cable
Image: An illustration detailing the included rechargeable battery for the car, the remote control, and the charging cable.
Setup
1. Car Battery Installation and Charging
- Sib il-kompartiment tal-batterija fuq in-naħa ta’ taħt tal-karozza RC.
- Use the provided screwdriver to open the battery compartment.
- Connect the included rechargeable Lithium Polymer battery to the car's connector.
- Carefully place the battery inside the compartment and close the cover securely with the screwdriver.
- To charge the car battery, connect the charging cable to the battery and a suitable USB power source. A full charge takes approximately 1 hour and provides 20-30 minutes of play time.
2. Installazzjoni tal-Batterija tal-Kontrollur mill-Bogħod
- Sib il-kompartiment tal-batterija fuq wara tal-kontrollur remot.
- Iftaħ l-għatu tal-kompartiment tal-batterija.
- Insert 2 x 1.5V AA batteries (not included), ensuring correct polarity.
- Agħlaq l-għatu tal-kompartiment tal-batterija.
Image: A close-up of the remote control highlighting its functions (Forward/Backward, Deformation, Turn Left/Right, Auto Demo) and the car's underside with the On/Off switch and signal light.
Istruzzjonijiet Operattivi
1. Ixgħel
Turn on the RC car using the On/Off switch located on its underside. The car's signal light will illuminate. Turn on the remote controller.
2. Basic Movement
- Quddiem/Lura: Use the left joystick on the remote control to move the car forward or backward.
- Dawwar ix-Xellug/Lemin: Use the right joystick to steer the car left or right.
3. One-Button Deformation
Press the 'Deformation' button on the remote controller to transform the car into a robot and vice versa. The transformation is quick and seamless.
Video: This video demonstrates the one-button deformation feature of the RC car, showing it transforming from car to robot and back.
4. 360° Rotation and Drift
In both car and robot modes, the vehicle can perform 360° rotations and drifts. This feature is activated by specific remote control inputs (refer to the remote control diagram in the Setup section).
Image: The RC car robot is shown mid-transformation, performing a dynamic 360-degree rotation, with the remote control visible.
5. Auto Demo Function
Press the 'Auto Demo' button on the remote controller to initiate a pre-programmed sequence of movements and transformations.
Video: This video showcases the automatic demonstration feature, where the RC car performs various movements and transformations autonomously.
6. 2.4Ghz Remote Control
The 2.4Ghz control system allows multiple cars to operate simultaneously without interference, providing a stable connection for responsive control.
Image: A composite image highlighting key features: 2.4GHz remote control, 360-degree rotation, sturdy and durable construction, and rubber wheels for various terrains.
Manutenzjoni
- Clean the car and remote control with a soft, dry cloth. Do not use water or chemical cleaners.
- Aħżen il-prodott f'post frisk u niexef 'il bogħod mix-xemx diretta meta ma tkunx qed tuża.
- Neħħi l-batteriji mir-remote control jekk se taħżnu għal perjodi twal biex tevita t-tnixxija.
Issolvi l-problemi
- Il-karozza ma tirrispondix: Ensure both the car and remote control are powered on. Check battery levels in both devices and replace/recharge as necessary.
- Transformation issues: Verify that the car battery is sufficiently charged. Ensure no obstructions are preventing the transformation mechanism.
- Ħin qasir tal-logħob: Ensure the car battery is fully charged (approx. 1 hour for 20-30 minutes of play). Battery performance may decrease over time with repeated use.
Speċifikazzjonijiet
- Dimensjonijiet tal-Prodott: 9.2 x 4.2 x 2.7 pulzieri
- Piż tal-oġġett: 14 uqija
- Numru tal-Mudell tal-Oġġett: X210729
- Età Rakkomandata mill-Manifattur: 36 xahar - 12 snin
- Batterija tal-Karozza: 1 batterija tal-polimer tal-litju (inkluża)
- Batteriji tal-Kontroll mill-bogħod: 2 x 1.5V batteriji AA (mhux inklużi)
- Manifattur: BLUEJAY
Image: A visual representation of the product's dimensions, including the remote control, the car in both robot and vehicle forms, and the retail packaging.
Garanzija u Appoġġ
For warranty information or technical support, please contact BLUEJAY customer service through the retailer where the product was purchased. Please have your model number (X210729) and purchase details ready.
