1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME Big Ben 3D Wooden Puzzle with LED Light. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
2. Prodott Aktarview
The ROBOTIME Big Ben 3D Wooden Puzzle is a detailed model kit designed for enthusiasts aged 14 and up. It features a replica of the iconic British landmark, complete with an integrated LED lighting system to enhance its display. The kit consists of 220 precision laser-cut wooden pieces, ensuring a high-quality fit without the need for additional tools or glue for basic assembly. The finished model measures approximately 3.9 x 4.2 x 7.5 inches.
Image 2.1: The completed ROBOTIME Big Ben 3D Wooden Puzzle, showcasing its intricate details and illuminated LED lights.
3. Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, ivverifika li l-komponenti kollha huma preżenti:
- Pre-cut wooden puzzle sheets (220 pieces)
- LED light module and wiring
- Instruction manual (English)
- Small accessories (e.g., sandpaper, if included)
Nota: Batteries for the LED light are le inklużi u għandhom jinxtraw separatament.
4. Informazzjoni dwar is-Sigurtà
- Dan il-prodott fih partijiet żgħar u mhux adattat għal tfal taħt it-3 snin minħabba periklu ta' fgar.
- Recommended age for assembly is 14 years and up. Adult supervision is advised for younger builders.
- Handle wooden pieces with care as some parts may be delicate.
- Do not ingest any parts of the kit.
- Armi l-materjali tal-imballaġġ b'mod responsabbli.
5. Setup u Assemblea
Follow these steps to assemble your Big Ben 3D Wooden Puzzle:
- Preparazzjoni: Unpack all components and lay them out on a clean, flat surface. Familiarize yourself with the different wooden sheets and the instruction manual.
- Identifika l-Biċċiet: Each wooden piece is numbered. Refer to the instruction manual to identify the correct pieces for each step.
- Pop Out Pieces: Gently press out the required wooden pieces from their sheets. If a piece is difficult to remove, use a small piece of sandpaper (if provided) or a craft knife to carefully loosen it. Avoid forcing pieces to prevent breakage.
- Segwi l-Istruzzjonijiet: Assemble the model step-by-step according to the detailed diagrams and instructions provided in the manual. Pay close attention to the orientation of each piece.
- Interlocking Assembly: The pieces are designed to interlock. Ensure a snug fit for stability. While glue is generally not required, some users find a small amount of craft glue helpful for securing delicate or load-bearing connections.
- Integrazzjoni tad-Dawl LED: Integrate the LED light module as instructed in the manual. This typically involves threading wires and placing the light source within designated areas of the model.
Image 5.1: Illustrates the process of building the 3D puzzle, showing individual wooden pieces and a partially constructed model.
Image 5.2: Visual guide to the assembly process, from unboxing to fitting pieces and following the manual.
Image 5.3: A family engaging in the assembly process, highlighting the puzzle's role in developing hand-eye coordination and intellectual skills.
6. Operating the LED Light
Once the model is fully assembled and the LED light module is integrated:
- Daħħal Batteriji: Locate the battery compartment for the LED light module. Insert the required batteries (type and quantity specified in the manual, typically AAA or button cells) with correct polarity.
- Attiva d-Dawl: Use the designated switch or button to turn the LED lights on or off.
The LED lights provide a warm glow, enhancing the aesthetic appeal of the Big Ben model, especially in low-light conditions.
Image 6.1: The Big Ben model illuminated by its internal LED lights, serving as a decorative piece.
7. Manutenzjoni
- Tindif: Dust the model regularly with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as these can damage the wood.
- Ħażna: Store the model in a dry environment, away from direct sunlight and extreme temperature changes, to prevent warping or fading of the wood.
- Sostituzzjoni tal-batterija: If the LED lights dim or stop working, replace the batteries. Ensure proper disposal of old batteries.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Pieces break during assembly | Excessive force; delicate parts | Gently pop out pieces. Use a craft knife or sandpaper if stuck. If a piece breaks, use a small amount of wood glue for repair. |
| Id-dwal LED ma jinxtegħlux | Incorrect battery insertion; dead batteries; loose connection | Check battery polarity. Replace with new batteries. Ensure all wiring connections are secure. |
| Il-mudell mhux stabbli | Pieces not fully interlocked | Review assembly steps to ensure all pieces are firmly connected. Apply a small amount of wood glue to critical joints if necessary. |
9. Speċifikazzjonijiet
- Ditta: ROBOTIME
- Mudell: Big Ben (TG507)
- Materjal: Injam
- Numru ta' Biċċiet: 220
- Dimensjonijiet immuntati: 3.9 x 4.2 x 7.5 pulzieri (10 x 10.7 x 19 ċm)
- Piż tal-oġġett: 8.1 uqija (230 gramma)
- Età Rakkomandata: 14 snin 'il fuq
- Power Source for LED: Batteriji (mhux inklużi)
Image 9.1: Visual representation of the Big Ben model's dimensions.
10. Garanzija u Appoġġ
ROBOTIME is committed to providing quality products. If you encounter any issues with your product, such as missing or damaged parts, or require assistance with assembly, please contact ROBOTIME customer service. Professional after-sales service is available to address your concerns.
For support, please refer to the contact information provided on the product packaging or the official ROBOTIME websit.
