Manwal tal-Istruzzjonijiet tal-Heater Spazjali tat-Torri taċ-Ċeramika PTC STEALTH JHT100 ta' 32 pulzier

Istruzzjonijiet Importanti dwar is-Sigurtà

Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage.

• Dejjem ipplaggja l-ħiters direttament f'ħanut/reċipjent tal-ħajt. Qatt tuża b'korda ta' estensjoni jew vit tal-enerġija rilokabbli (outlet/power strip).
• Dan il-heater huwa HOT when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Żomm materjali kombustibbli, bħal għamara, mħaded, friex, karti, ħwejjeġ, u purtieri mill-inqas 3 piedi (0.9 m) minn quddiem il-heater u żommhom 'il bogħod mill-ġnub u wara.
• Attenzjoni kbira hija meħtieġa meta xi heater jintuża minn jew ħdejn tfal jew persuni invalidi u kull meta l-heater jitħalla jaħdem u ma jkunx hemm attenzjoni.
• Dejjem aqla l-heater meta ma tkunx qed tuża.
• Tħaddimx xi heater b'korda jew plagg bil-ħsara jew wara li l-heater ma jaħdimx, ikun waqa' jew ġie mħassar b'xi mod. Armi l-heater, jew erġa' lura f'faċilità ta' servizz awtorizzata għal eżaminazzjoni u/jew tiswija.
• Tużax barra.
• Dan il-heater mhuwiex maħsub għall-użu fil-kmamar tal-banju, f'żoni tal-ħasil tal-ħwejjeġ, u f'postijiet interni simili. Qatt issib il-ħiter fejn jista 'jaqa' f'banju jew f'kontenitur ta 'ilma ieħor.
• Tmexxix korda taħt it-twapet. Tgħattix il-korda b'twapet tat-twapet, runners, jew kisi simili. Irranġa l-korda 'l bogħod miż-żona tat-traffiku u fejn ma titfixkelx.
• Biex skonnettja l-heater, dawwar il-kontrolli fuq OFF, imbagħad neħħi l-plagg mill-iżbokk.
• Daħħalx jew tħallix oġġetti barranin jidħlu f'xi ftuħ ta' ventilazzjoni jew exhaust peress li dan jista' jikkawża xokk elettriku jew nar, jew jagħmel ħsara lill-heater.
• Biex tipprevjeni nar possibbli, m'għandekx timblokka d-dħul tal-arja jew l-egżost bl-ebda mod. Tużax fuq uċuħ rotob, bħal sodda, fejn il-fetħiet jistgħu jiġu mblukkati.
• Ħiter għandu partijiet sħan u b'ark jew sparking ġewwa. Tużahx f'żoni fejn jintużaw jew jinħażnu gażolina, żebgħa jew likwidi li jaqbdu.
• Uża dan il-heater biss kif deskritt f'dan il-manwal. Kwalunkwe użu ieħor mhux rakkomandat mill-manifattur jista 'jikkawża nar, xokk elettriku, jew korriment lil persuni.
• Always plug into a wall socket instead of a power strip during use.
• Il-karatteristiċi tal-heater Protezzjoni kontra t-Trib u Protezzjoni mis-sħana żejda for enhanced safety. If the heater tips over or overheats, it will automatically shut off.

Prodott Overview

The STEALTH JHT100 is a 32-inch PTC Ceramic Tower Space Heater designed for efficient and quiet indoor heating. It features multiple modes, a timer, and advanced safety protections.

Karatteristiċi ewlenin:

• Tisħin mgħaġġel: Utilizes PTC ceramic heating elements for quick warmth, heating up in approximately 2 seconds.
• Modi multipli: Offers four settings: Mid Heat (700W), High Heat (1500W), Cool Fan, and Low Heat.
• Oxxillazzjoni Wiesgħa: 70° widespread oscillation ensures even heat distribution across the room.
• Operazzjoni kwieta: Mibnija fil-multi-stage noise reduction aluminum silent motor operates at a low noise level of 50dB.
• Karatteristiċi tas-Sigurtà: Includes tip-over auto shut-off, overheat protection, V0 flame-retardant materials, and power turn-off protection.
• Kontroll konvenjenti: Comes with a multi-function remote control (up to 16 feet range) and a 6-hour timer.
• Disinn portabbli: Features a hidden carry handle for easy movement and storage.

Kontenut tal-Pakkett:

• 1 x STEALTH JHT100 Heater
• 1 x Base (two halves)
• 1 x Kontroll mill-bogħod
• 4 x Viti
• 1 x Manwal tal-Utent (dan id-dokument)
• 1 x Karta tal-Garanzija

Setup Istruzzjonijiet

Follow these steps to assemble and prepare your STEALTH JHT100 heater for first use.

1. Assemblaġġ tal-Bażi:

1. Carefully lay the heater body on its side on a soft, flat surface to prevent scratches.
2. Take the two halves of the base. Align the cable groove on one half with the power cord of the heater.
3. Connect the two base halves together around the bottom of the heater, ensuring they snap securely.
4. Secure the base to the heater body using the provided screws and a screwdriver. Ensure all screws are tightened for stability.

Image: All components of the Stealth JHT100 heater, including the main unit, two base halves, screws, remote control, and user manual, laid out on a floor before assembly.

2. Tqegħid:

• Poġġi l-heater fuq wiċċ sod u livell.
• Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any combustible materials.
• Do not place the heater in areas where it may get wet, such as bathrooms or laundry rooms.

Istruzzjonijiet Operattivi

Your STEALTH JHT100 heater can be operated using the control panel on top of the unit or the included remote control.

Funzjonijiet tal-Panew tal-Kontroll:

• Buttuna tal-Qawwa: Ixgħel jew jitfi l-heater.
• Mode Button (Wave Icon): Cycles through heating modes: Mid Heat (700W), High Heat (1500W), Cool Fan, and Low Heat.
• Timer Button (Clock Icon): Sets the auto shut-off timer from 1 to 6 hours.
• Oscillation Button (Arrows Icon): Activates or deactivates the 70° widespread oscillation feature.

Immaġni: Close-up view of the top control panel of the Stealth JHT100 heater, showing the power, mode, timer, and oscillation buttons.

Funzjonijiet tal-Kontroll mill-bogħod:

The remote control allows you to operate the heater from up to 16 feet away.

• ON/OFF Button (Red Power Icon): Powers the heater ON or OFF.
• HEAT Button (Wave Icon): Cycles through heating modes.
• SWING Button (Arrows Icon): Jattiva jew jiddiżattiva l-oxxillazzjoni.
• TIMER Button (Clock Icon): Sets the auto shut-off timer.

Image: The remote control for the Stealth JHT100 heater, displaying buttons for power, heat modes, oscillation, and timer.

Manutenzjoni

Tindif u manutenzjoni regolari jiżguraw prestazzjoni ottimali u lonġevità tal-ħiter tiegħek.

Tindif tal-Filtru tal-Arja:

1. Ensure the heater is turned OFF and unplugged from the power outlet.
2. Sib l-għatu tal-filtru tal-arja fuq wara tal-heater.
3. Gently open the cover and remove the air filter.
4. Clean the filter using a soft brush or vacuum cleaner to remove dust and debris. Do not wash the filter with water.
5. Once clean, reinsert the filter and close the cover securely.

Tindif Ġenerali:

• Imsaħ il-barra tal-ħiter b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
• Kun żgur li ma jidħol l-ebda ilma ġewwa l-heater.
• Allow the heater to dry completely before plugging it back in.

Issolvi l-problemi

Jekk il-ħiter tiegħek mhux qed jaħdem sew, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet

Garanzija u Appoġġ

The STEALTH JHT100 heater comes with a 2-Sena GaranzijaJekk jogħġbok irreferi għall-Karta tal-Garanzija inkluża għal termini u kundizzjonijiet dettaljati.

For technical support, troubleshooting assistance, or warranty claims, please contact Stealth customer service through the contact information provided on your Warranty Card or the official Stealth websit.