Manwal tal-Utent tal-Power Strip tal-Protezzjoni kontra ż-Żieda fil-Vultaġġ POWSAV NBW-903 bi 18-il Sokit

1. Introduzzjoni

This manual provides essential information for the safe and effective use of your POWSAV NBW-903 18-Outlet Surge Protector Power Strip. Please read all instructions carefully before use and retain this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

• Do not exceed the total rating: The maximum power rating for this product is 1875W (15A). Exceeding this limit may cause damage to the unit and create fire hazards.
• High-power devices: When the power rating of a device is over 1000W, please plug it directly into an existing wall outlet. It is not recommended to use the power strip for such devices.
• Sparking during power-on: When the power strip is turned on, a spark may occur around the plugging point. This is normal. To prevent this, power off the power strip before plugging in or unplugging devices.
• Ċertifikat tas-Sigurtà ETL: This product is ETL safety certified.
• Reżistenza għan-Nar: Constructed with environmental protection and fire-resistance PC shell with flame retardant at 1382℉ for enhanced durability and safety.

3. Karatteristiċi tal-prodott

The POWSAV NBW-903 is designed to provide extensive power distribution and surge protection for multiple electronic devices.

• 18 Ħwienet AC: Features 18 standard AC outlets for powering a wide range of electronics.
• 4 Portijiet USB: Includes 3 USB-A ports and 1 USB-C port (DC 5V, Total 3.0A, 17W) for convenient charging of mobile devices. Note: The USB-C port is not a Quick Charger 3.0 and does not support devices requiring 9-22V charging voltage.
• Protezzjoni minn Surge: Equipped with a 3-level complementary surge protector circuit (TVS, MOV, GDT) with a minimum 2100 Joules energy absorbing capacity to protect devices from power spikes and fluctuations.
• Protezzjoni ta' tagħbija żejda: An over-current protection switch limits the power strip's working current to prevent overheating.
• Flat Plug & Cord: Features a 6-foot heavy-duty extension cord with a right-angled flat plug for flexible placement against furniture or walls. Includes reusable fastening cable ties for organization.
• Dwal indikaturi: Includes 'Protected' and 'Grounded' indicator lights to confirm proper functioning of surge protection and grounding.

Immaġni: Fuqview of the POWSAV NBW-903 power strip with 18 AC outlets and 4 USB ports, demonstrating its capacity for multiple devices.

Image: Close-up of the 3 USB-A and 1 USB-C ports on the POWSAV NBW-903, actively charging several mobile devices.

4. Setup

1. Ippakkja: Neħħi l-power strip mill-imballaġġ tagħha bir-reqqa.
2. Pjazzament: Position the power strip in a dry, indoor location away from water sources and direct sunlight. The flat plug design allows for placement behind furniture.
3. Immuntar (Mhux obbligatorju): The power strip features mounting holes on the back for wall or desk mounting. Use appropriate screws (not included) to secure it.
4. Ipplaggja: Insert the power strip's flat plug into a grounded wall outlet.

Immaġni: Dettaljata view of the POWSAV NBW-903, highlighting its dimensions and the keyhole mounting slots on the underside for secure installation.

5. Istruzzjonijiet Operattivi

1. Power On/Off: Locate the red 'Reset/OFF' switch on the power strip. Press it to the 'ON' position to supply power to the outlets and USB ports. Press it to 'OFF' to cut power.
2. Dwal indikaturi: Once powered on, check the blue 'Protected' and 'Grounded' indicator lights. Both should illuminate, indicating that the surge protection and grounding functions are active.
3. Apparat li jgħaqqad: Plug your AC-powered devices into the 18 available outlets. Connect your USB-powered devices to the 3 USB-A or 1 USB-C ports.
4. Irrisettja tagħbija żejda: In case of an overload, the power strip will automatically shut off. Disconnect some devices, then press the 'Reset' button on the power switch to restore power.

Image: The POWSAV NBW-903 power strip showing the illuminated 'Protected' and 'Grounded' indicator lights, confirming active safety features.

6. Manutenzjoni

• Tindif: Ensure the power strip is unplugged and all devices are disconnected before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners.
• Spezzjoni: Periodically inspect the power cord and the power strip for any signs of damage, such as fraying, cuts, or discoloration. Discontinue use if damage is found.
• Ħażna: When not in use, store the power strip in a cool, dry place. Use the included cable ties to keep the cord organized.

7 Issolvi l-problemi

• Ebda Qawwa:
  • Check if the power strip's main switch is in the 'ON' position.
  • Kun żgur li l-istrixxa tal-enerġija hija pplaggjata sew f'iżbokk tal-ħajt li jaħdem.
  • If the 'Protected' light is off, the surge protection may have expired. Replace the unit.
  • If the 'Grounded' light is off, there may be a grounding issue with the wall outlet. Consult an electrician.
• Tagħbija żejda: If the power strip shuts off unexpectedly, it may be due to an overload. Unplug some devices and press the 'Reset' button on the power switch.
• Kwistjonijiet tal-Iċċarġjar tal-USB: Ensure your device's charging cable is properly connected. Verify that your device does not require a Quick Charger 3.0 or higher voltage (9-22V) as the USB-C port does not support these.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

POWSAV offers a Politika ta 'ritorn ta' 30 jum u a 12-il xahar garanzija for this product. For any inquiries or support needs, please contact POWSAV customer service. They aim to respond within 24 hours.