Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. Introduzzjoni

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

Karatteristiċi ewlenin:

• Flexible Watering Options: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
• Ibbaġitjar tal-Ilma: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

Figura 1.1: Quddiem view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2. Informazzjoni dwar is-Sigurtà

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• This controller is designed for użu fuq ġewwa biss. Do not install outdoors or in areas exposed to water.
• Kun żgur li l-provvista tal-enerġija hija skonnettjata qabel ma tagħmel xi wajers jew manutenzjoni.
• All electrical connections should be made in accordance with local electrical codes.
• Tippruvax issewwi l-unità int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.

3. Setup u Installazzjoni

3.1 Immuntar tal-Kontrollur

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. Immarka l-post mixtieq għall-immuntar fuq il-ħajt.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

Figura 3.1: Eżample of the controller mounted on a wall in an indoor setting.

3.2 Il-Wajers tal-Kontrollur

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Sensur tax-Xita (Mhux obbligatorju): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. Konnessjoni tal-Enerġija: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

Figura 3.2: Dettaljat view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. Istruzzjonijiet Operattivi

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

Figura 4.1: Il-pannell tal-kontroll fuqview, highlighting the LCD display, directional buttons, and function dial.

4.1 Issettjar tal-Ħin u d-Data Kurrenti

1. Dawwar l-arloġġ għal DATA/ARLOĠĠ.
2. Uża l- + u - buttons to set the current year, then press DĦUL.
3. Repeat for month, day, hour, and minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Setting Start Times

1. Dawwar l-arloġġ għal ĦIN BIDU.
2. The display will show '1'. Use + u - to set the first start time, then press DĦUL.
3. Continue setting up to 8 start times for the current program. To skip a start time, press DĦUL without setting a time.
4. To switch between Program A and B, press the PROGRAMM AB buttuna.

4.2.2 Setting Run Times (How Long)

1. Dawwar l-arloġġ għal KEMM DWAR.
2. The display will show 'STATION 1'. Use + u - to set the watering duration (1-240 minutes) for Station 1, then press DĦUL.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAMM AB buttuna.

4.2.3 Setting Watering Days (How Often)

1. Dawwar l-arloġġ għal KEMM TA 'Spiss.
2. Tista' tagħżel minn tliet għażliet:
• Days of the Week: Uża l- VEĠĠA LEJN button to move to the desired day, then press DĦUL to select/deselect.
• Intervalli: Użu + u - to set the interval (e.g., every 2 days).
• Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAMM AB buttuna.

4.3 Rain Delay Feature

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. Dawwar l-arloġġ għal AUTO.
2. Agħfas il- DEWMIEN IX-XITA buttuna.
3. Uża l- + u - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press ĊARA.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. Dawwar l-arloġġ għal BAĠIT.
2. Uża l- + u - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 Operazzjoni manwali

To manually water a specific station or all stations:

1. Dawwar l-arloġġ għal AUTO.
2. Agħfas il- MANWAL buttuna.
3. Uża l- VEĠĠA LEJN or VEĠĠA XELLUG buttons to select the desired station or 'ALL' for all stations.
4. Agħfas DĦUL.
5. Użu + u - biex tissettja l-ħin tat-tħaddim manwali.
6. Agħfas DĦUL biex tibda tisqija manwali.
7. Biex twaqqaf it-tisqija manwali, agħfas ĊARA.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to OFF. The controller will retain its programming.

5. Manutenzjoni

• Żomm il-kontrollur nadif u ħieles mit-trab u l-fdalijiet. Uża drapp artab u niexef għat-tindif.
• Ensure the controller is not exposed to moisture or direct water spray.
• Iċċekkja l-konnessjonijiet tal-wajers perjodikament biex tiżgura li huma sikuri.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For specific warranty information and detailed support, please refer to the official Orbit webis-sit jew ikkuntattja lis-servizz tal-konsumatur ta' Orbit direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Orbit Store fuq Amazon