1. Introduzzjoni
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Istruzzjonijiet tas-Sigurtà
Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita xokk elettriku, nar, jew korriment:
- Dan l-apparat huwa għal użu professjonali biss.
- Tiżgura l-provvista tal-enerġija voltage jaqbel mar-rekwiżiti tal-apparat.
- Tesponix l-apparat għax-xita jew l-umdità.
- Dejjem qabbad l-apparat ma' żbokk tad-dawl ertjat.
- Tiftaħx il-kaxxa. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu sservisjati mill-utent. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
- Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl.
- Kun żgur li jkun hemm ventilazzjoni adegwata madwar l-unità biex tevita li tissaħħan iżżejjed.
- Always secure the device with a safety cable when mounting overhead.
- Skonnettja mill-elettriku qabel it-tindif jew il-manutenzjoni.
3. Prodott Aktarview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Figura 3.1: Quddiem view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Figura 3.2: Quddiem view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Komponenti
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Bracket tal-Immuntar Aġġustabbli
- Safety Rope Attachment Point
4. Setup
4.1 Immuntar
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp jew toqgħod bilwieqfa.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Konnessjoni tal-Enerġija
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 Konnessjoni DMX (Mhux obbligatorja)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Istruzzjonijiet Operattivi
5.1 Operazzjoni tal-Panew tal-Kontroll
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- MENU: Enters the menu or goes back to the previous menu level.
- UP: Scrolls up through menu options or increases a value.
- 'L isfel: Scrolls down through menu options or decreases a value.
- Daħħal: Jikkonferma għażla jew jidħol f'submenu.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Kanal | Funzjoni | Firxa ta' Valur | Deskrizzjoni |
|---|---|---|---|
| 1 | Master Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Effett Strobe | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Built-in Programs | 0-255 | Selects various pre-programmed light shows |
| 6 | Veloċità tal-Programm | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Modalità Awtomatika: Cycles through pre-programmed light sequences.
- Modalità Attiva tal-Ħoss: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Tindif: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp jista' jintuża drapp. Tużax prodotti tat-tindif jew solventi li joborxu.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Spezzjoni tal-Cable: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Ħażna: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7 Issolvi l-problemi
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda qawwa | Kejbil tal-enerġija skonnettjat; l-ebda enerġija mis-sokit; fjus maħruq. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Ebda kontroll DMX | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Id-dwal jitteptep jew iġibu ruħhom b'mod irregolari | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| L-unità tisħon iżżejjed | Blocked ventilation; operating in high ambient temperature. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | lightmaXX |
| Numru tal-Mudell | LIG0016526-000 |
| Sors tad-Dawl | 2 x 50W COB Warm White LEDs |
| Kanali DMX | 6 Kanali |
| Modi ta' Kontroll | DMX, Auto, Sound Active, Manual |
| Dimensjonijiet (L x W x H) | 31.2 x 18.7 x 18.5 ċm (madwar 12.28 x 7.36 x 7.28 pulzieri) |
| Sors tal-Enerġija | Corded Elettriku |
| Tip ta' Installazzjoni | Ceiling Mount (with bracket) |
| Kulur | Iswed |
9. Garanzija u Appoġġ
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
