Bushnell CelluCORE 20 Cellular Trail Camera Instruction Manual

Introduzzjoni

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Bushnell CelluCORE 20 Cellular Trail Camera. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.

Informazzjoni dwar is-Sigurtà

• Use only specified battery types (12 AA alkaline batteries).
• Tħallatx batteriji qodma u ġodda jew tipi differenti ta 'batteriji.
• Ensure the camera is securely mounted to prevent falling and potential damage or injury.
• Keep the camera away from extreme temperatures and direct sunlight for prolonged periods.
• Avoid exposing the camera to excessive moisture or submerging it in water, despite its weather-resistant design.

Kontenut tal-Pakkett

• Bushnell CelluCORE 20 Cellular Trail Camera
• Antenna
• Ċinga tal-Immuntar
• Manwal ta' Istruzzjoni

Prodott Overview

The Bushnell CelluCORE 20 is a high-performance cellular trail camera designed for remote monitoring. It captures 20 MP still images and HD video, featuring an 80-foot night range with low-glow LEDs for discreet operation. The camera transmits images and videos directly to your mobile device via a cellular network, allowing for real-time monitoring and remote management through a dedicated app.

Figura 1: Quddiem view of the Bushnell CelluCORE 20 Cellular Trail Camera.

Figura 2: Key features of the camera, including 80ft night range, low-glow LEDs, sub-1 second trigger speed, 20MP images, and solar compatibility.

Setup

1. Installazzjoni tal-batterija

The camera requires 12 AA alkaline batteries for operation. For optimal performance and extended battery life (up to 6 months), it is recommended to use high-quality alkaline or lithium batteries.

1. Iftaħ il-kaxxa tal-kamera billi tiftaħ il-klipps tal-ġenb.
2. Locate the removable battery tray inside the camera.
3. Insert 12 AA batteries into the tray, ensuring correct polarity (+/-).
4. Slide the battery tray back into the camera until it clicks into place.

Figura 3: Removable battery tray for easy battery changes.

2. Installazzjoni tal-Kard SD

A Class 10 SD card (up to 32GB recommended) is required to store images and videos. The camera does not typically include an SD card.

1. Bil-kaxxa tal-kamera miftuħa, sib is-slott tal-kard SD.
2. Insert the SD card into the slot with the label facing up until it clicks.
3. To remove, press the card gently until it springs out.

Figura 4: SD card slot and internal controls for the camera.

Figura 5: SD card and battery tray visible inside the camera.

3. Twaħħil tal-Antenna

The antenna is crucial for cellular signal transmission.

1. Locate the antenna port on the top of the camera.
2. Screw the antenna clockwise onto the port until it is finger-tight. Do not overtighten.

Figura 6: Quddiem view of the camera with the antenna properly attached.

4. Immuntar tal-Kamera

The camera can be mounted to a tree or post using the provided strap.

1. Thread the mounting strap through the slots on the back of the camera.
2. Secure the camera to a sturdy tree or post at the desired height and angle.
3. Ensure the camera is stable and pointed towards the area you wish to monitor.

5. App Setup and Cellular Activation

To utilize the cellular features, download the Bushnell Trail Cameras app and activate your camera.

1. Download the "Bushnell Trail Cameras" app from your smartphone's app store.
2. Follow the in-app instructions to create an account and add your camera. This typically involves scanning a QR code on the camera.
3. Select a cellular data plan through the app. The camera supports Verizon networks.
4. Once activated, you can configure camera settings and receive images/videos remotely.

Istruzzjonijiet Operattivi

1. Tixgħil / Mitfi

• To power on, slide the ON/OFF switch to the "ON" position.
• Biex titfi, żżerżaq is-swiċċ ON/OFF għall-pożizzjoni "OFF".
• The "Wake Up" button can be used to temporarily activate the camera for status checks without fully powering it on.

2. Understanding Indicator Lights

The camera features indicator lights to communicate its status:

3. Qbid ta' Immaġni u Vidjow

The camera automatically captures images or videos when motion is detected within its range. Settings for capture mode (photo, video, photo+video), resolution, and trigger interval can be adjusted via the Bushnell Trail Cameras app.

Figura 7: Example of a daylight image captured by the camera.

Figura 8: Example of a night vision image captured by the camera, demonstrating its 80ft night range.

Manutenzjoni

1. Sostituzzjoni tal-batterija

Replace all 12 AA batteries when the battery indicator shows low power or when performance degrades. Always replace all batteries at once with new ones of the same type.

2. Ġestjoni tal-Kard SD

Regularly check the SD card status via the app. When the card is full, replace it or format it (which will erase all data). It is recommended to format the SD card periodically to maintain optimal performance.

3. Tindif

Gently wipe the camera lens and sensor window with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Keep the housing seals clean and free of debris to maintain water resistance.

4. Protezzjoni mit-Temp

While the camera is designed for outdoor use (IP67 rated), prolonged exposure to extreme weather conditions can affect its lifespan. Ensure all latches are securely closed to prevent moisture intrusion. Consider additional protective measures in areas prone to heavy rain or snow.

Issolvi l-problemi

• No Cellular Signal: Check antenna connection, ensure you are in a Verizon coverage area, and verify your data plan is active. Try repositioning the camera.
• L-ebda Stampi/Vidjows: Check battery level, ensure SD card is inserted correctly and not full, verify camera is powered on, and check motion sensor settings.
• Kwalità Fqira tal-Immaġni: Clean the lens, check for obstructions, and ensure the camera is not too close or too far from the subject.
• Ħajja Qasira tal-Batterija: Use high-quality alkaline or lithium batteries. Reduce the frequency of image/video capture or consider a solar panel accessory.
• Dħul tal-Ilma: Ensure all latches are fully closed and seals are free of debris. If water has entered, power off immediately, remove batteries and SD card, and allow to dry completely before attempting to use again.

Speċifikazzjonijiet

Garanzija u Appoġġ

This Bushnell CelluCORE 20 Cellular Trail Camera comes with a limited warranty. For detailed warranty information, product support, or service inquiries, please refer to the official Bushnell webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal talbiet ta’ garanzija.

Għal aktar riżorsi u mistoqsijiet frekwenti, żur il- Ħanut Bushnell fuq Amazon.