1. Prodott Aktarview
The HILTI B22 8.0 22V Lithium-Ion Battery Pack is a light and compact high-power battery designed for use with all Hilti 18V and 22V cordless tools. It provides reliable power for various applications. The battery weighs 2.5 lb and has dimensions of 5.7 x 3.8 x 3 inches (LxWxH). It is designed to operate within a working temperature range of 1 to 140 °F.
Image 1: The HILTI B22 8.0 22V Lithium-Ion Battery Pack, showcasinid-disinn kompatt tiegħu u ċ-ċ aħmar u iswedasing.
Video 1: Official Hilti video demonstrating the features and applications of Hilti B22V batteries, including the B22 8.0 model, in various construction scenarios.
2. Informazzjoni dwar is-Sigurtà
Always observe the following safety precautions when handling and using the HILTI B22 8.0 battery pack:
- Do not disassemble, crush, or incinerate the battery pack.
- Evita short-circuiting tat-terminali tal-batterija.
- Keep the battery pack away from water, moisture, and extreme temperatures (below 1°F or above 140°F).
- Use only Hilti-approved chargers and tools compatible with 22V Li-ion batteries.
- Jekk il-batterija tkun bil-ħsara jew qed tnixxi, evita kuntatt mal-ġilda u l-għajnejn. Fittex attenzjoni medika jekk iseħħ kuntatt.
- Store the battery pack in a cool, dry place, away from direct sunlight and flammable materials.
- Dispose of depleted or damaged batteries according to local regulations. Do not dispose of in household waste.
3. Setup
3.1 Iċċarġjar tal-batterija
To charge your HILTI B22 8.0 battery pack:
- Ensure you are using a Hilti-approved charger compatible with 22V Li-ion batteries.
- Insert the battery pack firmly into the charger until it clicks into place.
- Qabbad il-ċarġer ma' żbokk tad-dawl adattat.
- Id-dwal indikatur tal-ċarġer se juru l-istatus tal-iċċarġjar. Irreferi għall-manwal tal-ċarġer tiegħek għal mudelli speċifiċi tad-dwal.
- Ladarba tkun iċċarġjata kompletament, neħħi l-batterija mill-ċarġer.
3.2 Id-Daħħal tal-Batterija f'Għodda
To insert the battery pack into a compatible Hilti tool:
- Align the battery pack with the battery slot on the tool.
- Slide the battery into the slot until it locks securely. You should hear a click.
- Gently pull on the battery to ensure it is properly seated and locked before operating the tool.
4. Tħaddim tal-Pakkett tal-Batterija
4.1 Indikatur tal-Iċċarġjar tal-Batterija
The HILTI B22 8.0 battery pack features an LED charge indicator. Press the button on the battery to display the current charge level:
- 4 LEDs ħodor: Ħlas sħiħ.
- 3 LEDs ħodor: Approximately 75% charge.
- 2 LEDs ħodor: Approximately 50% charge.
- LED aħdar wieħed: Approximately 25% charge.
- 1 Flashing Green LED: Battery is almost depleted and requires charging.
4.2 Prestazzjoni Ottimali
For optimal performance and battery life, operate the battery within its specified working temperature range of 1°F to 140°F. Avoid using the battery in conditions outside this range, as it may affect performance and longevity.
5. Manutenzjoni
5.1 Tindif
Regularly clean the battery pack to prevent dust and debris buildup:
- Use a dry, soft cloth to wipe down the exterior of the battery.
- Ensure the battery terminals are clean and free from obstruction.
- Do not use solvents, abrasive cleaners, or immerse the battery in water.
5.2 Ħażna
When not in use for extended periods, store the battery pack:
- In a cool, dry environment, ideally between 32°F and 77°F (0°C and 25°C).
- With a partial charge (around 50-75%) to prolong its lifespan.
- 'Il bogħod mix-xemx diretta, sorsi ta' sħana, u materjali fjammabbli.
6 Issolvi l-problemi
If you encounter issues with your HILTI B22 8.0 battery pack, consider the following:
- Il-batterija mhix qed tiċċarġja: Ensure the charger is properly connected to a power source and the battery is fully seated in the charger. Check for any visible damage to the battery or charger.
- Tool not operating: Verify the battery is fully charged and securely inserted into the tool. Check if the tool itself has any issues (refer to the tool's manual).
- Reduced run time: Battery capacity can decrease over time with extensive use. Ensure the battery is being charged correctly and consider if it's nearing the end of its service life.
- Is-sħana żejda: If the battery or tool becomes excessively hot during use or charging, discontinue use immediately. Allow it to cool down in a well-ventilated area.
If problems persist, contact Hilti customer support for further assistance.
7. Speċifikazzjonijiet
| Brand | HILTI |
| Mudell | B22 8.0 |
| Kompożizzjoni taċ-Ċellola tal-Batterija | Jonju tal-litju |
| Kapaċità tal-batterija | 8 Amp Sigħat |
| Voltage | 22V |
| Piż | 2.5 lb |
| Dimensjonijiet (LxWxH) | 5.7 x 3.8 x 3 pulzieri |
| Firxa tat-Temperatura tax-Xogħol | 1 - 140 °F |
| Użi Rakkomandati | Għodda tal-Enerġija |
| Għadd ta' Unitajiet | 1 Għadd |
8. Garanzija u Appoġġ
Hilti provides comprehensive support and warranty for its products. The B22 8.0 battery pack is covered by Hilti's service offerings, which typically include:
- Garanzija ta' sena: Covers materials and workmanship.
- 2-Year Wear and Tear Coverage: Addresses issues arising from normal use.
- Tiswija f'Jum wieħed: Aims for quick service to minimize downtime.
For detailed warranty terms, service requests, or technical support, please visit the official Hilti website or contact Hilti customer service directly. You can find more information at www.hilti.com.
