Manwal tal-Utent tal-Audibax Onyx 120 Stand tat-Tastiera b'Imqass Doppju

1. Introduzzjoni

Thank you for choosing the Audibax Onyx 120 Double Scissor Keyboard Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new keyboard stand. Please read these instructions carefully before use and retain them for future reference.

2. Informazzjoni dwar is-Sigurtà

• Ensure all components are securely fastened before placing any instrument on the stand.
• Taqbiżx il-kapaċità massima ta 'tagħbija ta' 25 kg (55 lbs).
• Poġġi l-istand fuq wiċċ stabbli u livellat biex tevita li jinqaleb.
• Keep fingers clear of moving parts during adjustment to avoid pinching.
• Spezzjona l-istand regolarment għal kwalunkwe sinjal ta’ xedd jew ħsara. Tużax jekk ikun bil-ħsara.

3. Kontenut tal-Pakkett

The Audibax Onyx 120 Keyboard Stand package includes:

• Audibax Onyx 120 Double Scissor Keyboard Stand frame
• Ċavetta eżagonali għall-assemblaġġ
• Manwal ta' Istruzzjoni

Note: Synthesizers, samplers, and digital instruments are not included.

4. Setup u Assemblea

Assembly of the Audibax Onyx 120 is designed to be quick and straightforward, typically taking less than 10 minutes.

1. Unfold the main X-frame of the keyboard stand.
2. Identify the upper and lower support arms. These are typically pre-attached but may require tightening.
3. Using the provided hexagonal key, securely tighten any screws on the upper and lower arms to ensure stability.
4. Ensure the anti-slip rubber caps on the feet and support arms are firmly in place.

Figura 4.1: The Audibax Onyx 120 Double Scissor Keyboard Stand in its folded configuration, ready for setup or transport. This image shows the stand's compact design.

Figura 4.2: A dettaljata view of the top support arm of the Audibax Onyx 120, highlighting the adjustment holes and the anti-slip rubber padding designed to secure the keyboard.

5. Operazzjoni

5.1 Aġġustament tal-Għoli

The Audibax Onyx 120 features an integrated adjustment system with an Easy Lock ball joint, allowing you to quickly set the stand to your desired playing height, up to a maximum of 98 cm.

1. Locate the Easy Lock mechanism at the center pivot point of the X-frame.
2. Loosen the locking knob or lever (if applicable) to allow the stand to move freely.
3. Adjust the stand to the desired height by expanding or compressing the X-frame.
4. Once the desired height is reached, securely tighten the locking knob or lever to fix the stand in position. Ensure it is stable before proceeding.

5.2 Placing Your Keyboard

The stand is equipped with anti-slip rubber on both the upper and lower arms to ensure maximum stability and protection for your instrument and floor.

1. Carefully place your keyboard or digital instrument onto the upper support arms.
2. Ensure the keyboard is centered and sits firmly on the anti-slip rubber pads.
3. Verify that the stand remains stable and does not wobble.

Figura 5.1: The Audibax Onyx 120 Keyboard Stand supporting a musical keyboard, demonstrating its intended use and stability.

5.3 Trasport u Ħażna

This keyboard stand is foldable and lightweight, making it easy to transport and store. To fold, simply reverse the height adjustment process until the stand is fully collapsed. Its compact size allows for convenient storage or transport to various events.

Figura 5.2: A close-up view of the base of the Audibax Onyx 120 Keyboard Stand, showing the robust construction and the anti-slip rubber feet that protect the floor and enhance stability.

6. Manutenzjoni

• Tindif: Imsaħ l-istand b'ċarruta ratba u niexfa. Għal ħmieġ iebes, neħħi ftitamp Jista' jintuża drapp, segwit minn tnixxif immedjat. Evita prodotti tat-tindif jew solventi li joborxu.
• Spezzjoni: Periodically check all screws, bolts, and the locking mechanism for tightness. Ensure the anti-slip rubber pads are intact and not worn.
• Ħażna: Store the stand in a dry environment, away from extreme temperatures and humidity.

7 Issolvi l-problemi

• L-istand iħossu instabbli:
  • Ensure the locking mechanism is fully engaged and tightened.
  • Ivverifika li l-istand ikun imqiegħed fuq wiċċ ċatt u livellat.
  • Check all assembly screws for tightness using the hexagonal key.
• Keyboard slides on the stand:
  • Ensure the anti-slip rubber pads on the support arms are clean and intact.
  • Confirm the keyboard is properly centered on the support arms.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Audibax customer service through their official websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.