Introduzzjoni
This instruction manual provides essential information for the safe and efficient use of your Imetec Eco Ceramic Diffusion Fan Heater, Model 4035. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The Imetec Eco Ceramic Diffusion Fan Heater features ceramic heating technology for efficient warmth, an Eco Technology mode for reduced energy consumption, 6 temperature settings, a timer function, and an oscillating base for uniform heat distribution. It also includes an anti-freeze function and comes with a remote control for convenient operation.
Figure 1: Imetec Eco Ceramic Diffusion Fan Heater, Model 4035.
Istruzzjonijiet Importanti dwar is-Sigurtà
- Kun żgur li l-apparat jitqiegħed fuq wiċċ stabbli, ċatt u reżistenti għas-sħana.
- Do not cover the heater or obstruct the air inlets/outlets.
- Żomm il-materjali fjammabbli f'distanza sigura mill-ħiter.
- Tużax il-heater fil-kmamar tal-banju, f'żoni tal-ħasil tal-ħwejjeġ, jew f'postijiet imxarrbin simili.
- Aqla’ l-heater mill-plagg tal-elettriku meta ma jkunx qed jintuża jew qabel ma tnaddaf.
- Tħaddimx il-heater b'korda jew plagg bil-ħsara.
- Dan l-apparat huwa għall-użu fuq ġewwa biss.
Setup
- Spakkjar: Carefully remove the heater from its packaging. Retain packaging for storage if desired.
- Pjazzament: Place the heater on a firm, level surface, ensuring there is at least 50 cm of clear space around the front, sides, and rear of the appliance to allow for proper air circulation. Do not place it directly under a power outlet.
- Konnessjoni tal-Enerġija: Tiżgura l-voltage indicated on the rating label matches your mains supply. Insert the power plug firmly into a suitable grounded electrical outlet.
Figure 2: Proper placement of the fan heater in a room.
Istruzzjonijiet Operattivi
The Imetec Eco Ceramic Diffusion Fan Heater can be operated using the control panel on the unit or the supplied remote control.
Figure 3: Control panel of the fan heater.
Qawwa mixgħul/mitfi
- Agħfas il- Buttuna tal-qawwa (
) fuq il-pannell tal-kontroll jew il-kontroll remot biex tixgħel jew titfi l-ħiter.
Temperature and Heat Settings
- The heater offers 6 temperature functions. Use the '+' u '-' buttons on the control panel or remote to adjust the desired temperature.
- The digital display will show the selected temperature.
- Il-ħiter iżomm it-temperatura ssettjata awtomatikament.
Funzjoni ta 'Oxxillazzjoni
- Agħfas il- Buttuna ta 'oxxillazzjoni (
) to activate or deactivate the oscillating movement, which helps distribute heat evenly across the room.
Funzjoni Timer
- Agħfas il- Buttuna tat-tajmer (
) to set the operating duration. Each press will increase the timer setting. The heater will automatically turn off once the set time has elapsed.
Funzjoni Kontra l-Iffriżar
- This function automatically activates the heater if the room temperature drops below a certain threshold (typically 5°C) to prevent freezing. Refer to the full product manual for specific activation details.
Kontroll mill-bogħod
- The remote control allows you to operate all functions of the heater from a distance. Ensure the remote control has working batteries and is pointed towards the heater's receiver.
Manutenzjoni
Tindif
- Dejjem aqla’ l-heater mill-plagg tal-elettriku u ħallih jiksaħ kompletament qabel ma tnaddfu.
- Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Tgħaddix il-heater fl-ilma jew f'xi likwidu ieħor.
- Periodically clean the air inlets and outlets with a vacuum cleaner to remove dust and lint.
Ħażna
- Jekk se taħżen il-heater għal perjodu twil ta' żmien, naddfu sewwa u erġa' poġġih fl-imballaġġ oriġinali tiegħu.
- Aħżen il-heater f'post frisk u niexef, 'il bogħod mix-xemx diretta u mill-umdità.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-heater ma jixgħelx. | No power supply; power button not pressed; safety switch activated (e.g., tip-over). | Check power cord connection and wall outlet. Press the power button. Ensure the heater is upright on a flat surface. |
| Il-ħiter mixgħul iżda mhux qed jipproduċi sħana. | Temperature setting too low; Eco mode active; air inlets/outlets blocked. | Increase the temperature setting. Check for obstructions and clear them. |
| Il-kontroll mill-bogħod ma jaħdimx. | Dead batteries; remote not pointed at receiver; obstruction. | Replace batteries. Ensure clear line of sight to the heater's control panel. |
| Ħoss jew riħa mhux tas-soltu. | Dust accumulation; internal fault. | Unplug and clean the heater. If the problem persists, discontinue use and contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Imetec customer support.
Speċifikazzjonijiet
- Ditta: Imetec
- Mudell: 4035
- Kulur: Iswed u Abjad
- Dimensjonijiet (L x W x H): 57.8 x 25.8 x 22.4 ċm
- Piż: 2.2 kg
- Number of Temperature Settings: 6
- Karatteristiċi Speċjali: Oscillating, Timer, Anti-freeze function, Remote Control
- Użu: Ġewwa
- ASIN: B0987BBB14
Garanzija u Appoġġ għall-Klijent
Your Imetec Eco Ceramic Diffusion Fan Heater is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Imetec customer support through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fid-dokumentazzjoni tal-prodott tiegħek.
You can visit the official Imetec store for more information: Imetec Store.
