Elitech ECB-3000 Electric Control Box User Manual

Model: ECB-3000-220V

Introduzzjoni

The Elitech ECB-3000 is an integrated electrical control box specifically designed for temperature management in cold rooms, seafood machines, and chillers. It provides precise control over cooling, defrosting, fan operation, and lighting. Constructed with an ABS flame-retardant material shell, it offers good waterproofing, a durable design, and stable, reliable performance. This manual provides essential information for the safe and effective operation of your ECB-3000 control box.

Informazzjoni dwar is-Sigurtà

Please read all safety warnings and instructions carefully before installation and operation to prevent injury or damage.

Ensure the power supply matches the specifications (220V) of the ECB-3000 before connecting.
Il-konnessjonijiet elettriċi kollha għandhom isiru minn elettriċista kwalifikat skont il-kodiċijiet elettriċi lokali u nazzjonali.
Do not operate the device with wet hands or in excessively humid environments.
Do not open the control box unless power is disconnected. There are no user-serviceable parts inside.
Keep the device away from direct sunlight, heat sources, and corrosive substances.
Żgura ertjar xieraq biex tevita xokk elettriku.

Prodott Overview

The Elitech ECB-3000 features a user-friendly interface with a digital display and intuitive buttons for setting parameters. It integrates multiple control functions into a single robust unit.

Elitech ECB-3000 Electric Control Box, front view

Figura 1: Quddiem view of the Elitech ECB-3000 Electric Control Box, showing the main display and control buttons.

Elitech ECB-3000 Electric Control Box, close-up of display and buttons

Figura 2: Close-up view of the ECB-3000's digital display, 'SET' button, 'Cool' and 'Defrost' indicators, and 'Start/Stop' buttons.

Elitech ECB-3000 Electric Control Box, angled view

Figura 3: Angolat view of the ECB-3000, highlighting its compact and robust design suitable for various installations.

Setup

Follow these steps for proper installation of the ECB-3000 control box:

Immuntar: Choose a suitable location for mounting the control box, ensuring it is protected from direct water spray and excessive vibration. Use appropriate fasteners to secure the box to a stable surface.
Wiring: Carefully connect the power supply (220V), temperature sensors, compressor, defrost heater, fan, and light according to the wiring diagram provided with your unit. Ensure all connections are secure and insulated.
Tqegħid tas-Sensor: Install the temperature sensor(s) in the desired location within the cold room or chiller to accurately measure the ambient temperature.
Qawwa Inizjali: Once all connections are verified, apply power to the unit. The digital display should illuminate.

Istruzzjonijiet Operattivi

Operazzjoni Bażika

Power On/Off: Use the 'Start' (green) and 'Stop' (red) buttons on the front panel to turn the control box functions on or off.
Wiri: The main digital display shows the current temperature measured by the sensor.

Kontroll tat-Temperatura

The ECB-3000 supports both refrigeration and heating conversion functions. Parameters can be continuously modified during operation.

Issettjar tat-Temperatura: Press the 'SET' button to enter the temperature setting mode. Use the Up/Down arrow buttons to adjust the desired temperature setpoint. Press 'SET' again to confirm.
Differenzjali tat-Temperatura: The unit adopts a temperature differential control method. This means the compressor will turn on when the temperature rises above the setpoint plus the differential, and turn off when it drops below the setpoint. Refer to the detailed parameter settings in the full technical manual for adjusting the differential.

Funzjoni Defrost

The control box manages automatic defrost cycles to prevent ice buildup on the evaporator.

Indikatur tad-defrost: The 'Defrost' indicator light will illuminate when the defrost cycle is active.
Defrost Parameters: Defrost frequency, duration, and termination temperature can be configured through the manager menu. Consult the full technical manual for access and adjustment of these advanced parameters.

Fann u Kontroll tad-Dawl

Operazzjoni tal-Fann: The fan operation is typically linked to the compressor cycle or can be independently controlled based on configured parameters.
Kontroll tad-Dawl: The light output can be manually switched or configured to operate automatically based on door switches or other inputs, depending on the wiring and parameter settings.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your ECB-3000 control box.

Tindif: Periodically wipe the exterior of the control box with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off before cleaning.
Verifika tal-Konnessjonijiet: Annually, or as needed, inspect all electrical connections for tightness and signs of corrosion. Ensure power is disconnected before performing this check.
Spezzjoni tas-Sensor: Verify that temperature sensors are clean and properly positioned.
Ventilazzjoni: Ensure that the control box is not obstructed and has adequate ventilation to prevent overheating.

Issolvi l-problemi

This section addresses common issues you might encounter with the ECB-3000.

Problema	Kawża Possibbli	Soluzzjoni
Il-wiri huwa vojt	No power supply; Loose wiring	Check power source; Verify all wiring connections.
Il-qari tat-temperatura mhuwiex preċiż	Sensor faulty; Sensor improperly placed	Check sensor connection; Reposition sensor; Replace sensor if faulty.
Il-kompressur ma jibdax	Temperature not above setpoint + differential; Wiring issue; Compressor fault	Check setpoint and differential; Verify compressor wiring; Consult a technician if compressor is faulty.
Defrost not initiating	Defrost parameters incorrect; Defrost heater fault	Review defrost settings; Check defrost heater and wiring.

For issues not listed here or if problems persist, please contact Elitech customer support.

Speċifikazzjonijiet

Karatteristika	Dettall
Brand	Elitech
Mudell	ECB-3000-220V
Manifattur	Elitech
Medda tal-Kejl tat-Temperatura	-50 ~ 50 ℃
Provvista tal-Enerġija	220V
Materjal	ABS Flame-retardant
Metodu ta' Kontroll	Temperature differential control
Funzjonijiet	Refrigeration, Heating conversion, Defrost, Fan, Light control
Batteriji Meħtieġa	Nru
Pajjiż/Reġjun ta' Oriġini	Iċ-Ċina

Garanzija u Appoġġ

For warranty information and technical support, please contact Elitech Technology, Inc. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or can be obtained from the manufacturer's official websit.

Please retain your proof of purchase for any warranty claims. For returns, a 15-day refund/replacement policy may apply, subject to the seller's terms and conditions.

Elitech Technology, Inc.
For contact information, please visit the official Elitech webis-sit jew irreferi għad-dokumentazzjoni inkluża mal-prodott tiegħek.

	Soluzzjonijiet Elitech għar-Refriġerazzjoni Industrijali u l-Kontroll tat-Temperatura tal-Proċess Elitech toffri firxa komprensiva ta' soluzzjonijiet ta' kontroll tat-temperatura għal refriġerazzjoni industrijali u applikazzjonijiet ta' proċess. Dan id-dokument jagħti dettalji dwar diversi termostati, pannelli ta' kontroll elettriċi, u protetturi għal kull skop, filwaqt li jenfasizza l-karatteristiċi, l-ispeċifikazzjonijiet tekniċi u x-xenarji tal-applikazzjoni tagħhom.
	Manwal tal-Utent tal-Kontrollur tat-Temperatura Elitech MTC-2120S Manwal tal-utent għall-Elitech MTC-2120S, kontrollur tat-temperatura versatili b'sensor wieħed b'funzjonijiet ta' refriġerazzjoni, defrost, u allarm ta' temperatura żejda. Jinkludi parametri tekniċi, struzzjonijiet ta' tħaddim, dijagrammi tal-wajers, u soluzzjoni ta' problemi.
	Manwal tal-Utent tal-Kontrollur tat-Temperatura ETC-3000 Manwal tal-utent għall-kontrollur tat-temperatura ETC-3000, li jiddeskrivi l-funzjonijiet tiegħu, id-dwal indikaturi, il-wajers, u t-tħaddim. Jinkludi informazzjoni dwar il-funzjonijiet tal-kompressur, id-defrost, il-fann, u l-allarm, kif ukoll l-użu tal-COPIA u l-illokkjar tat-tastiera.
	Elitech RC-5+ Logger tad-Data tat-Temperatura: Manwal tal-Utent u Speċifikazzjonijiet Dan il-manwal jipprovdi struzzjonijiet dettaljati għall-użu tad-data logger tat-temperatura USB Elitech RC-5+, li jkopri s-setup, it-tħaddim, it-tniżżil tad-dejta, u l-analiżi bis-softwer Elitech. Il-karatteristiċi u l-ispeċifikazzjonijiet tekniċi huma inklużi wkoll.
	Gwida għall-Utent u Speċifikazzjonijiet tar-Reġistratur tad-Data tat-Temperatura b'Użu Multiplu Elitech RC-51 Gwida komprensiva għad-data logger tat-temperatura multi-użu Elitech RC-51, li tkopri l-prodott fuqview, parametri tekniċi, struzzjonijiet għall-użu, dejta viewing, sostituzzjoni tal-batterija, u kontenut ta' rapport PDF. Il-karatteristiċi jinkludu firxa wiesgħa ta' temperaturi, preċiżjoni għolja, u kapaċità kbira ta' ħażna għal-loġistika u l-monitoraġġ tal-katina tal-kesħa.
	Manwal tal-Utent tal-Monitor tat-Temperatura Elitech RCW-600WIFI IoT Manwal tal-utent għall-Elitech RCW-600WIFI, monitor tat-temperatura tal-IoT b'żewġ kanali b'konnettività WiFi għal dejta remota viewmonitoraġġ, u ġestjoni fl-industriji tal-ikel, tal-catering, tal-loġistika, u tal-HACCP.

Elitech ECB-3000-220V