1. Introduzzjoni
This manual provides comprehensive instructions for the setup, operation, and maintenance of your DIGITUS 2D Barcode Scanner (Model: DA-81002). This device is designed for efficient and accurate scanning of 1D and 2D barcodes, including QR codes, supporting bi-directional scanning at 200 scans/sec. Please read this manual thoroughly before using the scanner to ensure proper functionality and longevity.
2. X'hemm fil-Kaxxa
Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:
- 1 x 2D barcode hand scanner, QR code compatible
- 1 x scanner holder
- 1 x cable, USB - RJ45, 2 m
- 1 x Gwida għall-Installazzjoni Mgħaġġla (QIG)
Image: The DIGITUS 2D Barcode Scanner, shown with its included stand and USB-RJ45 cable. The scanner is dark grey with an orange trigger button.
3. Setup
- Qabbad il-Cable: Insert the RJ45 end of the provided cable into the port at the base of the barcode scanner. Ensure it clicks securely into place.
- Qabbad mat-Tagħmir Ospitanti: Plug the USB end of the cable into an available USB port on your computer or point-of-sale (POS) system.
- Installazzjoni tas-Sewwieq (Plug & Play): The scanner is typically plug-and-play and should be recognized automatically by most operating systems (Windows, macOS, Linux). No specific driver installation is usually required. If prompted, allow the system to install necessary drivers.
- Pożizzjona l-Iskaner: Place the scanner in its holder for hands-free operation, or hold it comfortably for handheld scanning.
- Test Scan: Open a text editor (e.g., Notepad, Word) or a compatible application. Scan a known barcode. The data should appear in the open application.
4. Istruzzjonijiet Operattivi
The DIGITUS 2D Barcode Scanner is designed for ease of use. Follow these steps for effective scanning:
- Qawwa Mixgħul: The scanner powers on automatically when connected to a powered USB port. A successful power-on is usually indicated by a short beep and/or a light indicator.
- Timmira: Point the scanning window towards the barcode you wish to scan. Ensure the entire barcode is within the scanner's field of view.
- Skanjar: Press and hold the trigger button (orange button on the handle). A red aiming beam or illumination light will appear. Position the scanner so the aiming beam crosses the center of the barcode.
- Successful Scan: Upon a successful scan, the scanner will emit a short beep and/or the indicator light will flash. The scanned data will be transmitted to your connected device as if typed via a keyboard.
- Bi-Directional Scanning: The scanner supports bi-directional scanning, meaning it can read barcodes regardless of their orientation, improving scanning efficiency.
- QR Code Compatibility: This scanner is fully compatible with QR codes, allowing for versatile data capture.
5. Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your barcode scanner:
- Tindif tat-Tieqa tal-Iskennjar: Naddaf it-tieqa tal-iskannjar regolarment b'ċarruta ratba u mingħajr suf. Għal tbajja' persistenti, neħħi ftitampen the cloth with water or a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the window.
- Tindif Ġenerali: Wipe the exterior of the scanner with a soft, dry cloth to remove dust and dirt.
- Kura tal-Cable: Evita li tgħawweġ jew iddawwar il-kejbil USB b'mod eċċessiv, għax dan jista' jagħmel ħsara lill-wajers interni.
- Ħażna: When not in use, store the scanner in a clean, dry environment, away from extreme temperatures and direct sunlight.
- Evita Qtar: While designed for durability, avoid dropping the scanner, as impact can damage internal components.
6 Issolvi l-problemi
If you encounter issues with your DIGITUS 2D Barcode Scanner, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-iskaner ma jixgħelx. | No power from USB port; loose cable connection. | Ensure USB cable is securely connected to both scanner and host device. Try a different USB port or host device. |
| L-iskaner ma jaqrax il-barcodes. | Barcode damaged/unreadable; incorrect aiming; scanner not configured for barcode type. | Ensure barcode is clear and undamaged. Aim the scanner correctly. Refer to the QIG for advanced configuration options if specific barcode types are not recognized. |
| Id-dejta skennjata mhijiex korretta jew mhux kompluta. | Partial scan; software/application issue. | Ensure the entire barcode is within the scanning area. Test with a simple text editor to rule out application-specific issues. |
| Scanner beeps but no data appears. | Host device not receiving data; application not in focus. | Ensure the cursor is active in the target input field. Restart the application or host device. |
7. Speċifikazzjonijiet
Key technical specifications for the DIGITUS 2D Barcode Scanner (Model: DA-81002):
- Dimensjonijiet tal-Prodott: 1.1 x 9.7 x 6.5 pulzieri
- Piż tal-oġġett: 3.88 uqija
- Numru tal-Mudell tal-Oġġett: DA-81002
- Manifattur: DIĠITU
- Apparati Kompatibbli: Scanner (general purpose)
- Sors tal-Enerġija: Elettriku bil-fili (permezz tal-USB)
- Teknoloġija tal-Konnettività: Cable USB
- Rata ta' Skanjar: 200 fps (frejms kull sekonda)
- Kompatibilità tal-barcode: 1D and 2D barcodes, including QR Code
- Tul tal-Cable: 2 meters (USB - RJ45)
8. Garanzija u Appoġġ
For warranty information and technical support, please refer to the Quick Installation Guide (QIG) included in your product package or visit the official Digitus websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
For further assistance, you may contact Digitus customer support through their official channels. Details are typically provided in the product documentation or on the manufacturer's websit.
