Manwal tal-Utent tal-GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder

Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.

The GBC ShredMaster AUTO+ 50X is designed for shredding paper documents and credit cards, offering a P-4 security level for confidential information. It features both automatic and manual feed options for convenience.

Informazzjoni dwar is-Sigurtà

• Żomm idejk, xagħar, u ħwejjeġ maħlula 'l bogħod mis-slott tad-dħul tal-karta.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod mit-shredder.
• Tisprejjax prodotti fjammabbli fuq it-tqattigħ jew tużax ħdejn materjali fjammabbli.
• Skonnettja t-tqattigħ tal-karti qabel ma ċċaqlaq, tnaddaf, jew tbattal il-kontenitur tal-iskart.
• Do not shred metal objects, large paper clips, or adhesive labels as these can damage the cutting mechanism. Small paper clips and staples are generally acceptable for this model.
• Ħaddem it-tqattigħ fuq wiċċ ċatt u stabbli.

Setup

1. Spakkjar: Carefully remove the shredder from its packaging. Ensure all packing materials are removed from around the shredder and inside the waste bin.
2. Pjazzament: Position the shredder on a level, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
3. Konnessjoni tal-Enerġija: Ipplaggja l-korda tad-dawl fi żbokk elettriku standard.
4. Bin tal-Iskart: Ensure the waste bin is correctly inserted into the shredder housing. The shredder will not operate if the bin is not properly seated.

Istruzzjonijiet Operattivi

Control Panel Matulview

The control panel features intuitive touch controls for easy operation.

Automatic Feed Operation

The AUTO+ 50X features an automatic feed tray for shredding up to 50 sheets of 80 gsm paper at once.

1. Ensure the shredder is plugged in and the waste bin is correctly inserted.
2. Lift the automatic feed tray cover.
3. Stack up to 50 sheets of paper neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
4. Close the automatic feed tray cover. The shredder will automatically detect the paper and begin shredding.

Operazzjoni tal-Għalf Manwali

For smaller quantities of paper (up to 6 sheets of 80 gsm) or credit cards, use the manual feed slot.

1. Ensure the shredder is plugged in and the waste bin is correctly inserted.
2. Insert paper or a credit card into the manual feed slot. The shredder will automatically start and stop.
3. For credit cards, insert one card at a time into the designated slot.

Protezzjoni mis-sħana żejda

To prevent motor overheating, the shredder is equipped with an automatic thermal overload protection system. After approximately 10 minutes of continuous shredding, the machine will automatically rest for 45 minutes to cool down. During this cool-down period, the shredder will not operate. Resume operation once the cool-down period is complete.

Manutenzjoni

It-tbattil tal-Waste Bin

The shredder features an easy-to-empty 20-liter pull-out bin with a viewing window to monitor fill levels.

1. Skonnettja t-tqattigħ tal-karti mill-plagg tal-elettriku.
2. Iġbed il-kontenitur tal-iskart minn quddiem it-tqattigħ tal-karti.
3. Empty the shredded material into a suitable receptacle.
4. Slide the waste bin back into the shredder until it is securely seated.
5. Erġa’ daħħal it-tqattigħ tal-karti fl-iżbokk tal-elettriku.

Oiling the Shredder

Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol oils).

1. Applika linja rqiqa ta’ żejt tat-tqattigħ tal-karti tul is-slott tad-dħul tal-karta.
2. Run the shredder in reverse for 10 seconds to distribute the oil.
3. Irrepeti dan il-proċess wara kull 30 minuta ta' tqattigħ akkumulat jew mill-inqas darbtejn fix-xahar.

Tindif

Imsaħ il-barra tax-shredder b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: G2020050X
• Tip ta' tqattigħ: Cross Cut
• Livell ta 'sigurtà: P-4 (DIN 66399)
• Daqs tat-tqattigħ: 4 x 28 mm confetti cut
• Auto Feed Capacity: 50 folji (80 gsm)
• Kapaċità tal-Għalf Manwali: 6 folji (80 gsm)
• qatgħat: Paper, small paper clips, staples, credit cards
• Kapaċità Bin: 20 Litri
• Run Time: 10 minutes continuous, 45 minutes cool-down
• Dimensjonijiet Approssimattivi (Għ x W x D): 40.6 cm x 43.2 cm x 38.1 cm (16" H x 17" W x 15" D, based on product images)
• Piż: 11.6 kg
• Sors tal-Enerġija: Corded Elettriku
• Karatteristiċi Speċjali: Automatic Start/Stop, Jam Proof

Garanzija u Appoġġ

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official GBC websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

For further assistance, you may contact GBC customer service through their official channels. Details are typically available on the manufacturer's webis-sit jew l-imballaġġ tal-prodott.