1. Introduzzjoni
Thank you for choosing the BRPOM BM200 6000A Car Jump Starter. This device is designed to provide emergency starting power for your vehicle, as well as serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Prodott Aktarview
2.1 Karatteristiċi ewlenin
- Bidu Qawwi tal-Qabża: 6000A peak current, capable of starting vehicles with up to 8.0L gasoline or 6.5L diesel engines. Operates effectively in temperatures from -20°C to 60°C.
- Standby Estiż: Maintains charge for up to 12 months when not in use. A fully charged 12V unit can perform up to 40 jump starts.
- Bank tal-Enerġija ta' 21800mAh: Equipped with QC3.0 compatible USB ports for fast charging mobile phones, tablets, cameras, and other electronic devices.
- Enhanced Smart Clamps: Features 8 advanced protection technologies including reverse polarity, short-circuit, over-discharge, over-temperature, over-current, over-charge, over-voltage, and overload protection. Longer and thicker wires for better conductivity and wider opening range.
- 4-Mode LED Flashlight: Includes illumination, strobe, SOS, and warning light modes for emergencies, camping, or roadside assistance.
- Integrated Safety Hammer and Compass: Additional tools for emergency situations.
2.2 Kontenut tal-Pakkett
Kun żgur li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:
- BRPOM BM200 Jump Starter Unit
- Smart Jumper Clamps
- Cable tal-Iċċarġjar tal-USB
- Manwal għall-Utent
- Kawża tal-Ħażna
3. Setup: Initial Charging
Before first use, fully charge the BRPOM BM200 jump starter. It is recommended to charge the unit for 4-5 hours initially.
- Connect the provided USB charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a car charger.
- The LED indicators on the jump starter will illuminate to show the charging progress. All indicators will be solid when fully charged.
4. Istruzzjonijiet Operattivi
4.1 Aqbeż Startjar ta' Vettura
Kun żgur li l-jump starter huwa ċċarġjat mill-inqas 50% qabel ma tipprova tibda vettura.
- Qabbad Smart Clamps: Insert the blue end of the smart jumper cable into the jump starter's port. Ensure a secure connection.
- Waħħal mal-Batterija: Qabbad il-cl aħmaramp mat-terminal pożittiv (+) tal-batterija tal-vettura u l-klamp iswedamp għat-terminal negattiv (-).
- Iċċekkja Indikatur: The indicator light on the smart clamp will turn solid green when the connection is correct and safe to proceed. If it flashes or shows red, check connections and battery status.
- Ibda l-Vettura: Erġa' lura lejn il-vettura tiegħek u ixgħel il-magna.
- Neħħi Clamps: Ladarba tibda l-magna, neħħi immedjatament is-smart clamps from the vehicle battery, then disconnect the smart clamps mill-qabża starter.
4.2 Charging Electronic Devices (Power Bank Function)
The BM200 can charge various USB-powered devices.
- Qabbad il-kejbil tal-iċċarġjar USB tat-tagħmir tiegħek ma' wieħed mill-portijiet tal-ħruġ USB fuq il-jump starter.
- Il-jump starter jibda jiċċarġja t-tagħmir tiegħek awtomatikament.
- Skonnettja t-tagħmir tiegħek ladarba l-iċċarġjar ikun komplut.
4.3 L-Użu tat-Torċa LED
The integrated LED flashlight has four modes:
- Illuminazzjoni: Press and hold the power button for 3 seconds to turn on the flashlight.
- Strobe Short press the power button once to switch to strobe mode.
- SOS: Short press the power button again to switch to SOS mode.
- Dawl ta' Twissija: Short press the power button a third time to activate the warning light (flashing red/blue).
- To turn off the flashlight, press the power button again or press and hold for 3 seconds.
5. Manutenzjoni
- Iċċarġjar regolari: To maintain optimal battery life and readiness, recharge the jump starter every 3-4 months, even if not used.
- Ħażna: Store the unit in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Tindif: Imsaħ l-unità b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew materjali li joborxu.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Jump starter does not turn on or has low power. | Ħlas baxx tal-batterija. | Fully charge the jump starter for 4-5 hours before use. |
| Il-vettura ma tixgħelx wara li tikkonnettja. | Inkorretta clamp connection; vehicle battery completely dead; engine size exceeds capacity. | Tiżgura clamps are connected correctly (red to +, black to -). Check the smart clamp indicator for a solid green light. If the battery is severely discharged, allow a few minutes for the jump starter to provide some charge before attempting to start. Verify your vehicle's engine size is within the specified limits (8.0L Gas / 6.5L Diesel). |
| Smart clamp indicator shows red or flashes. | Reverse polarity, short circuit, or other protection activated. | Skonnettja clamps from the battery and jump starter. Re-read the operating instructions and reconnect carefully, ensuring correct polarity. |
| Jump starter does not charge devices. | Jump starter battery is low; device cable is faulty. | Charge the jump starter. Try a different USB cable or device to isolate the issue. |
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | BM200 |
| L-ogħla Kurrenti | 6000A |
| Kapaċità tal-batterija | 21800mAh (Nominal, derived from marketing) |
| Ibda Voltage | 12V |
| Klassifikazzjoni tal-Magna tal-Gass | Sa 8.0L |
| Klassifikazzjoni tal-Magna Diżil | Sa 6.5L |
| Temperatura operattiva | -20°C sa 60°C |
| Output USB | QC3.0 compatible (5V/9V/12V) |
| Input tal-Iċċarġjar | USB Tip-Ċ |
| Dimensjonijiet | 9 x 18 x 4 ċm |
| Piż | 970 g |
| Ċertifikazzjonijiet | CE |
8. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok osserva l-prekawzjonijiet tas-sigurtà li ġejjin:
- Do not attempt to jump start a vehicle if the jump starter's battery level is critically low.
- Kun żgur li l-polarità hija korretta meta tqabbad il-clamps to the vehicle battery. Reverse polarity can cause damage to the jump starter and/or vehicle.
- Tħallix l-aħmar u iswed clamps to touch each other, as this can cause a short circuit.
- Do not expose the jump starter to water, rain, or extreme moisture.
- Do not operate the jump starter in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Żomm fejn ma jintlaħaqx mit-tfal.
- If the jump starter becomes excessively hot during use, disconnect it immediately and allow it to cool down.
- Do not disassemble or modify the jump starter. Servicing should only be performed by qualified personnel.
- Uża biss is-smart cl provdutamps u kejbils tal-iċċarġjar.
9. Garanzija u Appoġġ
The BRPOM BM200 Car Jump Starter comes with a garanzija ta' sentejn from the date of purchase, covering manufacturing defects and product-related issues.
For any questions regarding the product, technical support, or warranty claims, please contact BRPOM customer service directly. Contact information can typically be found on the product packaging or the official BRPOM websit.
