1. Introduzzjoni
Thank you for choosing the Hbada J301 Ergonomic Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.
The Hbada J301 office chair is designed for comfort and support during extended periods of sitting. Key features include adjustable lumbar support, flip-up armrests for space-saving, seat height adjustment, 360-degree swivel, and a rocking function.
2. Informazzjoni dwar is-Sigurtà
- Kun żgur li l-komponenti kollha huma mwaħħla sew qabel l-użu.
- Toqgħodx fuq is-siġġu.
- Tużax is-siġġu fuq uċuħ irregolari.
- Żomm idejk u saqajk 'il bogħod mill-partijiet li jiċċaqalqu waqt l-aġġustament.
- Maximum static load capacity is approximately 120 kg (265 lbs). Do not exceed this limit.
- Keep children away from the chair during assembly and adjustment.
3. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-partijiet kollha huma preżenti qabel tibda l-assemblaġġ. Jekk xi partijiet huma neqsin jew bil-ħsara, ikkuntattja l-appoġġ għall-klijenti.
- Assemblaġġ tad-dahar
- Assemblaġġ tal-Kuxxin tas-Sedil b'Armrests
- Ċilindru tal-Lift tal-Gass
- Base (5-star nylon base)
- Casters (5x PU casters)
- Pjanċa tal-Mekkaniżmu
- Kit tal-Ħardwer (viti, woxers, Allen wrench)
4. Setup u Assemblea
Follow these steps to assemble your Hbada J301 office chair. Assembly typically takes 15-30 minutes.
- Waħħal ir-Roti mal-Bażi: Insert each of the five casters into the holes at the end of the chair base arms. Push firmly until they click into place.
- Daħħal il-Gass Lift: Place the gas lift cylinder into the central hole of the assembled base.
- Waħħal il-Pjanċa tal-Mekkaniżmu mas-Sedil: Allinja l-pjanċa tal-mekkaniżmu mat-toqob imtaqqbin minn qabel fuq in-naħa ta’ taħt tal-kuxxin tas-sedil. Waħħalha billi tuża l-viti u l-wrench Allen provduti. Kun żgur li l-parti ta’ quddiem tal-mekkaniżmu tħares lejn in-naħa ta’ quddiem tas-sedil.
- Waħħal id-Dahar tas-Sedil: Connect the backrest to the seat assembly. Secure it with the appropriate screws.
- Qabbad l-Assemblea tas-Sedil mal-Lift tal-Gass: Poġġi s-sedil u d-dahar immuntati bir-reqqa fuq iċ-ċilindru tal-irfigħ tal-gass, waqt li tiżgura li jkun iċċentrat u stabbli.
Figura 1: Chair Dimensions. This image illustrates the overall dimensions of the Hbada J301 chair, including height, width, and depth, from both front and side perspectives, aiding in space planning and fit.
5. Istruzzjonijiet Operattivi
5.1. Aġġustament tal-Għoli tas-Sedil
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at your desired height.
5.2. Aġġustament ta 'Appoġġ Lumbari
The chair features an adjustable lumbar support. The butterfly-shaped lumbar pillow gently supports your waist. The lumbar support can be adjusted vertically by approximately 5 cm to match your back's curve.
Figura 2: Lumbar Support Adjustment. This image highlights the adjustable lumbar support system, showing its vertical adjustment range and the mesh material for breathability.
5.3. Serħan tad-dirgħajn li jinfetħu 'l fuq
The armrests can be flipped up to allow the chair to be pushed closer to a desk, saving space. Simply lift the armrests upwards until they lock into a vertical position. To return them to the horizontal position, pull them down.
Figura 3: Flip-Up Armrests for Space Saving. This image demonstrates how the chair's armrests can be rotated upwards, allowing the chair to be neatly tucked under a desk, optimizing space in smaller rooms.
5.4. Funzjoni tat-Tbandil
The chair features a rocking function with an approximate 15-degree recline. To activate, pull out the lever on the left side, beneath the seat. Push the lever in to lock the chair in an upright position. The tension of the rocking mechanism can be adjusted by rotating the round knob located under the seat.
Figura 4: Rocking Function and Tension Adjustment. This image illustrates the chair's rocking capability, showing the lever used to engage/disengage the function and the knob for adjusting the recline tension.
5.5. Dawra ta' 360 Grad
The chair seat and backrest assembly can rotate 360 degrees, providing flexibility and ease of movement in your workspace.
6. Manutenzjoni
6.1. Tindif
- Mesh Backrest and Seat: Imsaħ bl adamp drapp u sapun ħafif. Evita kimiċi ħarxa.
- Base and Armrests: Naddaf b'artab, damp drapp.
- Xandara: Regularly check casters for accumulated hair, dust, or debris. Remove any obstructions to ensure smooth rolling.
6.2. Kura Ġenerali
- Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikkahom jekk meħtieġ.
- Avoid exposing the chair to direct sunlight for prolonged periods to prevent material degradation.
- Do not use abrasive cleaners or tools that could scratch the chair's surfaces.
7 Issolvi l-problemi
If you encounter any issues with your Hbada J301 chair, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Chair does not roll smoothly | Casters are dirty or obstructed. | Clean casters, removing any hair or debris. |
| L-aġġustament tal-għoli tas-sedil mhux qed jaħdem | Gas lift lever is stuck or damaged; gas lift cylinder malfunction. | Check if the lever is fully engaged. If the issue persists, contact customer support for gas lift replacement. |
| Is-siġġu jħossu instabbli jew jitriegħed | Viti maħlula jew assemblaġġ irregolari. | Iċċekkja u ssikka l-viti kollha tal-assemblaġġ. Kun żgur li s-siġġu jkun fuq wiċċ ċatt. |
| Il-funzjoni tat-tbandil hija wisq riġida jew wisq laxka | Rocking tension knob needs adjustment. | Rotate the tension adjustment knob under the seat to increase or decrease resistance. |
8. Speċifikazzjonijiet
- Mudell: J301 (HDNY163GM/JP)
- Dimensjonijiet (W x D x H): 60 ċm x 60 ċm x 100-110 ċm
- Medda ta' Għoli tas-Sedil: 46-il ċm - 56 ċm
- Piż: Madwar 12 kg
- Kapaċità tat-Tagħbija Statika: Madwar 120 kg
- Materjali: Breathable mesh, high-density urethane foam, reinforced nylon base, silent PU casters
- Pulzieri: Flip-up disinn
- Funzjoni ta' Mimdud: Approximately 15-degree rocking
Figura 5: Chair Material Breakdown. This image details the high-quality materials used in the chair's construction, such as the TUV-5 certified gas lift, durable nylon base, and silent PU casters, ensuring safety and comfort.
9. Garanzija u Appoġġ
The Hbada J301 office chair comes with a garanzija ta 'sena on the product body, covering repair or replacement for manufacturing defects. This warranty is provided free of charge.
For customer support, warranty claims, or inquiries, please contact your retailer or the Hbada customer service team through the official website or contact information provided at the point of purchase.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.
