1. Introduzzjoni
This manual provides detailed instructions for the EverBrite 3-Pack Wireless LED Puck Lights. These versatile lights offer 12 RGB color options, remote and touch control, and timing functions, making them suitable for various indoor lighting needs.
2. X'inhu Inkluż
- 3 x EverBrite Wireless LED Puck Lights
- 1 x Kontroll mill-bogħod
- 9 x AAA Batteries (3 per light)
- 3 x Double-Sided Adhesive Tapes

Image: Contents of the EverBrite 3-Pack Wireless LED Puck Lights package, including three puck lights, a remote control, nine AAA batteries, and three adhesive tapes.
3. Setup u Installazzjoni
3.1. Installazzjoni tal-batterija
- Gently twist the back cover of each puck light counter-clockwise to open the battery compartment.
- Insert 3 AAA batteries into each light, ensuring correct polarity (+/-).
- Replace the back cover by aligning the notches and twisting clockwise until secure.

Image: Step-by-step illustration of opening the battery cover and inserting AAA batteries into the puck light.
3.2. Mounting the Lights
- Clean the surface where you intend to mount the light. Ensure it is dry and free of dust.
- Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the puck light.
- Peel off the other side of the adhesive tape and press the light firmly onto the desired surface for at least 30 seconds.

Image: Illustration showing the application of double-sided adhesive tape to the back of the puck light for mounting.
4. Istruzzjonijiet Operattivi
4.1.Touch Kontrolli
Press the center of the light to turn it ON/OFF. Repeated presses will cycle through preset colors (White, Red, Green, Blue) and then OFF.

Image: Demonstrates the touch control feature of the puck light, cycling through white, red, green, and blue colors.
4.2. Kontroll mill-bogħod
The included remote control allows for comprehensive management of the puck lights from up to 20 feet away. Point the remote directly at the lights for optimal response.

Immaġni: Dettaljata view of the remote control, highlighting buttons for ON/OFF, color selection, brightness adjustment, and timing functions.
- ON/OFF: Press the "ON" button to turn on all connected lights. Press "OFF" to turn them off.
- Għażla tal-Kulur: Choose from 12 RGB colors using the color palette buttons.
- Dawl abjad: Press the "W" button for a pure white light.
- Aġġustament tal-luminożità: Use the brightness up/down buttons to increase or decrease the light intensity.
- Modalità Flash: Press "FLASH" to activate a mode where 7 colors flash gradually.
- Modalità Fade: Press "FADE" to activate a mode where 7 colors dimmable gradually.
- Funzjonijiet tat-tajmer: Set the lights to automatically turn off after 30 minutes ("30 min") or 60 minutes ("60 min").
Video: Demonstration of the EverBrite 3-Pack Tap Lights, showcasing battery installation, adhesive mounting, and remote control functions including color changes, brightness adjustment, and timer settings.
5. Manutenzjoni
5.1. Sostituzzjoni tal-batterija
When the lights dim or stop responding, it's time to replace the AAA batteries. Follow the battery installation steps in Section 3.1. For optimal performance, replace all three batteries in a puck light at the same time.
5.2. Tindif
Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or immerse the lights in water.
6 Issolvi l-problemi
- Id-dwal ma jixegħlux: Ensure batteries are correctly installed and not depleted. Check if the remote control battery is functional.
- Ir-remote mhux qed jirrispondi: Point the remote directly at the lights. Ensure there are no obstructions. Replace the remote's battery if necessary.
- Lights falling off: Ensure the mounting surface is clean and dry before applying adhesive. For heavy-duty applications or rough surfaces, consider additional mounting solutions.
- Ħajja qasira tal-batterija: Continuous use of color-changing modes (Flash/Fade) or high brightness settings can deplete batteries faster. Using timer functions can help conserve battery life.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | E007069 |
| Brand | EverBrite |
| Stil | Round Tap Light |
| Tip ta' Sors tad-Dawl | LED |
| Luminożità | 80 Lumens |
| Numru ta' Kuluri | 12-il Kulur RGB + Abjad |
| Metodu ta' Kontroll | Remote, Touch |
| Sors tal-Enerġija | Battery Powered (3 AAA per light) |
| Dimensjonijiet tal-Prodott | 2.4"D x 2.4"W x 1.22"H |
| Piż tal-oġġett | 9.91 ounces (total for 3-pack) |
| Materjal | Plastik (Akrilonitril Butadien Stirene) |
| Karatteristiċi Speċjali | 12 RGB Colors, Flash/Fade Mode, Remote Control, Timing Function, Touch Control |
| Użu fuq ġewwa/barra | Ġewwa |
| Livell ta 'Reżistenza għall-Ilma | Mhux Reżistenti għall-Ilma |
8. Garanzija u Appoġġ
For warranty information or technical support, please refer to the product packaging or contact EverBrite customer service directly. Contact details are typically available on the manufacturer's websit jew permezz tal-bejjiegħ bl-imnut tiegħek.





