Fanvil i10D IP Intercom System User Manual

1. Introduzzjoni

The Fanvil i10D is a compact and efficient IP intercom system designed for secure communication and access control. This manual provides detailed instructions for the installation, operation, and maintenance of your Fanvil i10D device, ensuring optimal performance and longevity. Please read this manual thoroughly before using the product.

2. Informazzjoni dwar is-Sigurtà

• Ensure the device is installed by qualified personnel in accordance with local electrical codes.
• Tesponix l-apparat għall-ilma jew temperaturi estremi.
• Use only the power adapter specified by the manufacturer.
• Evita li tpoġġi l-apparat ħdejn kampi elettromanjetiċi qawwija.
• Do not attempt to open or repair the device yourself. Contact authorized service personnel.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Fanvil i10D IP Intercom Unit
• Bracket tal-Immuntar
• Viti u Plakek tal-Ħitan
• Gwida ta 'Installazzjoni Mgħaġġla

4. Prodott Aktarview

The Fanvil i10D features a robust design with essential components for effective communication and access control.

Figura 4.1: Quddiem view of the Fanvil i10D IP Intercom System. The device features a dark grey upper section with a speaker grille and a microphone opening, and a silver lower section. Below the speaker, there are two black buttons: one with a phone icon for calling, and another with a key icon for door unlock.

Komponenti Ewlenin:

• Kelliem: Located behind the grille in the upper section, for clear audio output.
• Mikrofonu: A small circular opening above the speaker grille, for voice input.
• Buttuna Sejħa: Marked with a phone icon, used to initiate a call to a pre-configured extension.
• Door Unlock Button: Marked with a key icon, used to remotely unlock a connected door.

5. Setup u Installazzjoni

5.1 Immuntar tal-Apparat

1. Choose a suitable location for installation, typically near an entrance or access point.
2. Use the mounting bracket as a template to mark drilling holes on the wall.
3. Drill toqob u daħħal plugs tal-ħajt.
4. Waħħal il-bracket tal-immuntar mal-ħajt billi tuża l-viti pprovduti.
5. Attach the Fanvil i10D unit to the mounting bracket, ensuring it clicks securely into place.

5.2 Wiring u Konnessjonijiet

The Fanvil i10D supports Power over Ethernet (PoE) for simplified installation.

• Konnessjoni tan-Netwerk: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the RJ45 port on the back of the i10D.
• Door Lock Connection (Optional): If connecting to an electronic door lock, refer to the wiring diagram in the Quick Installation Guide for proper connection to the relay output terminals. Ensure correct polarity and voltage.

5.3 Konfigurazzjoni Inizjali

After physical installation, the device requires network configuration.

1. The i10D will obtain an IP address via DHCP by default. You can find its IP address using a network scanner or Fanvil's IP Scanner tool.
2. Iftaħ a web browser and enter the device's IP address to access its webinterface ta 'ġestjoni bbażata fuq.
3. Idħol billi tuża l-isem tal-utent u l-password awtomatiċi (irreferi għall-Gwida ta' Installazzjoni Rapida għall-kredenzjali awtomatiċi).
4. Configure SIP account settings, network parameters, and door access control settings as required by your system.

6. Istruzzjonijiet Operattivi

6.1 Tagħmel Sejħa

• To initiate a call, press the Buttuna tas-Sejħa (phone icon).
• The i10D will dial the pre-configured extension or SIP address.
• Once the call is connected, you can communicate with the recipient via the built-in speaker and microphone.

6.2 Riċeviment ta' Sejħa

The Fanvil i10D is primarily designed for outgoing calls from the intercom to an internal station. Incoming calls to the i10D are typically not supported for direct voice communication, but it can receive commands for actions like door unlocking.

6.3 Door Unlock Function

• During an active call from the i10D to an indoor station, the recipient can send a DTMF code (e.g., '*') to trigger the door unlock relay.
• Alternattivament, il- Door Unlock Button (key icon) on the i10D can be configured to directly trigger the relay, allowing local access control. This function is typically used by authorized personnel.

7. Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-wiċċ tal-apparat. Tużax prodotti tat-tindif jew solventi li joborxu.
• Aġġornamenti tal-Firmware: Iċċekkja perjodikament l-uffiċjal ta' Fanvil website for firmware updates to ensure optimal performance and security. Follow the instructions provided with the firmware.
• Kundizzjonijiet Ambjentali: Kun żgur li l-apparat jaħdem fil-firxiet speċifikati tat-temperatura u l-umdità biex tevita l-ħsara.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

Fanvil products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fanvil website. For technical support, troubleshooting assistance, or service inquiries, please contact your local distributor or Fanvil customer service through their official channels.

Uffiċjali Websit: www.fanvil.com