1. Introduzzjoni
This manual provides instructions for the safe installation, operation, and maintenance of your Innovations 288-1W-BAB-M4-AB One Light Wall Sconce from the Nouveau 2 Collection. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Figure 1: Innovations 288-1W-BAB-M4-AB Wall Sconce, featuring a black antique brass finish and a clear glass shade with an exposed filament bulb.
2. Informazzjoni dwar is-Sigurtà
WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing.
- Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
- Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess ta 'installazzjoni.
- Dan l-apparat huwa kklassifikat għal Damp locations. Do not install in areas where it will be directly exposed to water.
- Kun żgur li l-konnessjonijiet tal-wajers kollha huma siguri u iżolati kif suppost.
- Taqbiżx il-wat massimutage speċifikat għall-bozza tad-dawl.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Wall Sconce Fixture (1 unit)
- Mounting Hardware (crossbar, screws, wire nuts)
- Manwal ta' Istruzzjoni
Note: Light bulb is typically sold separately unless specified.
4. Setup u Installazzjoni
Għodda Meħtieġa (mhux inkluża): Screwdriver, wire strippers, electrical tape, safety glasses.
- Itfi l-Enerġija: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Ipprepara Wajers: Carefully remove the existing fixture (if any). Strip 3/4 inch of insulation from the ends of the house supply wires.
- Waħħal Pjanċa tal-Immuntar: Secure the mounting plate (crossbar) to the junction box using the provided screws. Ensure it is firmly attached.
- Agħmel Konnessjonijiet elettriċi:
- Connect the bare copper ground wire from the fixture to the house ground wire (usually bare copper or green) using a wire nut.
- Connect the ribbed or marked fixture wire (neutral) to the house white wire (neutral) using a wire nut.
- Connect the smooth or unmarked fixture wire (hot) to the house black wire (hot) using a wire nut.
- B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
- Fixture tal-Immonta: Align the fixture with the mounting plate and secure it using the provided screws or decorative nuts.
- Installa l-Bozza tad-Dawl: Screw in an ST64 type light bulb (max 1 Watt, or as specified on the fixture) into the socket.
- Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker jew mill-kaxxa tal-fjużijiet.
5. Istruzzjonijiet Operattivi
Once installed and power is restored, the Innovations 288-1W-BAB-M4-AB Wall Sconce operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
6. Manutenzjoni
Tindif:
- Ensure power is turned off before cleaning.
- Imsaħ l-apparat b'ċarruta ratba u niexfa.
- Tużax prodotti tat-tindif, solventi, jew lostri li joborxu għax jistgħu jagħmlu ħsara lill-finitura.
Sostituzzjoni tal-bozza:
- Itfi l-enerġija lill-apparat tad-dawl fis-circuit breaker.
- Ħalli l-bozza tiksaħ kompletament qabel ma tmissha.
- Unscrew the old bulb and replace it with a new ST64 type bulb, not exceeding 1 Watt.
- Irrestawra l-enerġija.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. |
|
|
| Teptip ħafif. |
|
|
8. Speċifikazzjonijiet
| Brand | Innovazzjonijiet |
| Numru tal-Mudell | 288-1W-BAB-M4-AB |
| Dimensjonijiet tal-Prodott | 8" W x 6.38" Għoli |
| Materjal | Steel, Cast Brass, Glass |
| Temm | Black Antique Brass (Two-tone) |
| Voltage | 120 Volts |
| Tip ta' Sors tad-Dawl | ST64 |
| Sors tad-Dawl Wattage | 1 Watt (Mass) |
| Klassifikazzjoni tas-Sigurtà | Damp Post |
| Piż tal-oġġett | 2.75 Liri |
| UPC | 663481285023 |
9. Garanzija u Appoġġ
This Innovations fixture comes with a 2-year finish warranty u a lifetime electrical warrantyDin il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu u servizz normali.
For technical support, replacement parts, or warranty claims, please contact Innovations customer service. Refer to your purchase documentation for specific contact details or visit the official Innovations websit.
Please have your model number (288-1W-BAB-M4-AB) and date of purchase available when contacting support.
