Manwal tal-Utent tas-Serrieq Jig Total TS2081006 800W

1. Introduzzjoni

Thank you for choosing the Total TS2081006 800W Jig Saw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before using the jig saw and keep it for future reference. Proper use and care will ensure optimal performance and extend the lifespan of your tool.

2. Istruzzjonijiet Ġenerali dwar is-Sigurtà

Dejjem segwi l-prekawzjonijiet bażiċi tas-sigurtà biex tnaqqas ir-riskju ta 'nar, xokk elettriku, u korriment personali.

• Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol tiegħek nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
• Sigurtà Elettrika: Il-plakek tal-għodda tal-enerġija għandhom jaqblu mas-sokit. Qatt ma timmodifika l-plakka bl-ebda mod. Evita kuntatt tal-ġisem ma' uċuħ ertjati jew imwaħħlin mal-art. Tesponix l-għodda tal-enerġija għax-xita jew għal kundizzjonijiet imxarrbin.
• Sigurtà Personali: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert and use common sense.
• Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-plagg mis-sors tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
• Jig Saw Specific Safety:
  • Żomm l-għodda mill-uċuħ tal-qabda iżolati meta twettaq operazzjoni fejn l-aċċessorju tat-tqattigħ jista' jmiss ma' wajers moħbija jew mal-korda tiegħu stess.
  • Sikura l-biċċa tax-xogħol. Uża clamps jew morsa biex iżżomm il-biċċa tax-xogħol.
  • Ensure the blade is correctly installed and secured before operation.
  • Keep hands clear of the cutting area.

3. Prodott Aktarview u Komponenti

Familiarize yourself with the parts of your Total TS2081006 Jig Saw before operation.

Figura 3.1: Total TS2081006 800W Jig Saw with a pack of blades. The tool features a teal and white body, an ergonomic handle, and a visible blade guard.

Figura 3.2: Ġenb view of the Total TS2081006 800W Jig Saw, highlighting the motor housing and handle design. The power cord extends from the rear of the handle.

Komponenti Ewlenin:

• Manku: Iddisinjat ergonomikament għal qabda u kontroll komdi.
• Trigger Switch: Jattiva l-mutur.
• Buttuna li tissakkar: Għal tħaddim kontinwu.
• Xafra Clamp: Secures the jig saw blade.
• Pjanċa Bażi (Żarbun): Supports the tool on the workpiece and can be adjusted for bevel cuts.
• Port tat-Trab: For connecting a dust extraction system (if applicable).
• Selettur tal-Azzjoni Orbitali: Adjusts the blade's orbital movement for different cutting speeds and materials (if applicable).

4. Setup

4.1 Installazzjoni tax-xafra

1. Kun żgur li l-Enerġija hija Skonnettjata: Always unplug the jig saw from the power source before installing or changing blades.
2. Xafra Miftuħa Clamp: Sib il-klipp tax-xafraamp mechanism (usually a lever or screw) and open it.
3. Daħħal ix-Xafra: Daħħal ix-xkub tax-xafra tas-serrieq tal-jig xierqa fil-klamp tax-xafraamp opening, ensuring the teeth face forward. Push the blade in until it seats firmly.
4. Xafra Sikura: Agħlaq ix-xafra clamp mechanism securely. Gently pull on the blade to ensure it is locked in place.

4.2 Base Plate Adjustment (Bevel Cuts)

1. Kun żgur li l-Enerġija hija Skonnettjata: Spluggja l-għodda.
2. Loosen Base Plate Screws: Locate the screws or lever that secure the base plate. Loosen them sufficiently to allow the base plate to pivot.
3. Aġġusta Angolu: Tilt the base plate to the desired bevel angle (e.g., 15°, 30°, 45°). Most jig saws have detents for common angles.
4. Issikka l-Viti: Securely tighten the base plate screws or lever to lock the angle in position.

5. Istruzzjonijiet Operattivi

5.1 Qabel il-Bidu

• Kun żgur li l-biċċa tax-xogħol tkun clamped.
• Select the appropriate blade for the material and cut type.
• Adjust the base plate for straight or bevel cuts as needed.
• Ipplaggja l-għodda f'sokit tal-enerġija adattat.

5.2 Nagħmlu Qatgħa

1. Pożizzjona l-Għodda: Poġġi t-tarf ta' quddiem tal-pjanċa tal-bażi ċatt fuq il-biċċa tax-xogħol, waqt li tiżgura li x-xafra ma tkunx imwaħħla mal-materjal.
2. Ibda l-Qatgħa: Depress the trigger switch to start the motor. Allow the blade to reach full speed before engaging the material.
3. Guide the Tool: Slowly guide the jig saw along your marked cutting line. Apply steady, even pressure. Do not force the tool; let the blade do the work.
4. Temm il-Qatgħa: Once the cut is complete, release the trigger switch and wait for the blade to stop completely before lifting the tool from the workpiece.

5.3 Plunge Cuts (Internal Cuts)

For internal cuts without a pilot hole, a plunge cut can be performed. This technique requires caution.

1. Tilt Tool: Tilt the jig saw forward so the front edge of the base plate rests on the workpiece, with the blade clear of the surface.
2. Ibda l-Mutur: Ibda l-mutur u ħalli x-xafra tilħaq il-veloċità sħiħa.
3. Slowly Lower: Slowly lower the rear of the base plate until the blade begins to cut into the material.
4. Level Tool: Once the blade has fully penetrated the material, level the tool and proceed with the cut as usual.

6. Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your jig saw. Always disconnect the tool from the power source before performing any maintenance.

• Tindif: Regularly clean the ventilation openings to prevent motor overheating. Use a soft brush or compressed air to remove dust and debris from the tool. Do not use water or chemical cleaners.
• Sostituzzjoni tax-xafra: Replace dull or damaged blades promptly. Refer to section 4.1 for blade installation.
• Spezzjoni tal-kurdun: Spezzjona l-korda tal-enerġija perjodikament għal ħsara. Jekk bil-ħsara, ħalliha tissewwa minn tekniku tas-servizz kwalifikat.
• Ħażna: Store the jig saw in a dry, secure location out of reach of children.

7 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista’ tiltaqa’ magħhom. Għal problemi mhux elenkati hawn, ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet

Technical data for the Total TS2081006 800W Jig Saw.

• Mudell: TS2081006
• Qawwa: 800 Watts
• Voltage: AC (Standard mains voltage, typically 220-240V in Egypt)
• Piż tal-oġġett: 1 Kilogramma
• Dimensjonijiet tal-Prodott: 10 x 20 x 37 ċm
• Kulur: Teal / Grey
• Materjal tal-manku: Thermoplastic Elastomers or Rubber
• Karatteristiċi Speċjali: Disinn ergonomiku
• Materjal tax-xafra: Azzar b'Veloċità Għolja (għax-xfafar inklużi)
• Rakkomandazzjoni tal-wiċċ: Aluminum (suitable for various materials with correct blade)

9. Garanzija u Appoġġ

Total products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact your retailer.

For technical support, service, or to order replacement parts, please contact the authorized Total service center or your point of purchase. Ensure you have your model number (TS2081006) and purchase details available.