Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your SPRT POS58 IVU Receipt Thermal Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
The SPRT POS58 IVU is a compact and efficient thermal receipt printer designed for various point-of-sale applications. It features USB connectivity and is compatible with 5.7 cm wide thermal paper.
Setup
1. Spakkjar u Spezzjoni
- Oħroġ il-printer u l-aċċessorji kollha mill-imballaġġ bir-reqqa.
- Verify that all components are present: printer unit, power adapter, USB cable.
- Inspect the printer for any visible damage. If damaged, contact your supplier immediately.
2. Konnessjoni tal-Printer
- Qabbad l-Enerġija: Insert the power adapter cable into the printer's power port and plug the other end into a suitable power outlet.
- Qabbad USB: Connect one end of the USB cable to the printer's USB port and the other end to an available USB port on your computer or POS system.
- Qawwa Mixgħul: Locate the power switch on the printer (typically on the side or front) and turn it to the 'ON' position.
3. Tagħbija ta' Karta Termali
The SPRT POS58 IVU printer uses standard 5.7 cm wide thermal paper rolls.
- Open the paper cover by pressing the release button or lifting the latch (location may vary slightly).
- Insert the thermal paper roll with the printing surface facing the thermal head. Ensure the roll is seated correctly in the paper compartment.
- Iġbed ammont żgħir ta' karta 'l barra mill-cutter.
- Agħlaq l-għatu tal-karta sew sakemm jikklikkja f'postu.
Figure 1: SPRT POS58 IVU Receipt Thermal Printer. This image displays the compact black thermal printer from an angled view, highlighting its paper output slot and the power switch located on the side.
Istruzzjonijiet Operattivi
Stampar Bażiku
- Ensure the printer is powered on and connected to your computer/POS system.
- Install the necessary printer drivers on your operating system if not already installed. Refer to the driver installation guide provided separately or available from the manufacturer's websit.
- From your application (e.g., POS software, word processor), select the SPRT POS58 IVU as your printer.
- Initiate the print command. The printer will automatically feed and print the receipt.
- Tear off the receipt against the serrated edge of the paper output slot.
Dwal Indikaturi
The printer typically has indicator lights to show its status:
- Dawl tal-Qawwa: Jindika li l-istampatur huwa mixgħul.
- Dawl tal-Iżball: Illuminates or blinks to indicate an error condition (e.g., paper out, print head overheat).
- Dawl ta' Karta Barra: Indicates that the paper roll is empty or incorrectly loaded.
Manutenzjoni
Tindif tar-Ras Termali
Regular cleaning of the thermal head ensures clear print quality and extends printer life. Clean the thermal head after every 50-100 km of printing or if print quality degrades.
- Itfi l-istampatur u skonnettja l-kejbil tal-enerġija.
- Iftaħ il-qoxra tal-karta.
- Wait a few minutes for the thermal head to cool down if the printer has been recently used.
- Gently wipe the thermal head surface with a cotton swab lightly moistened with absolute alcohol (ethanol).
- Allow the alcohol to evaporate completely before closing the cover and reconnecting power.
Tindif ta 'barra
Imsaħ il-barra tal-istampatur b'ċarruta ratba u damp drapp. Tużax solventi qawwija jew prodotti tat-tindif li joborxu.
Immaniġġjar tal-Karta
- Use only high-quality thermal paper to prevent damage to the thermal head and ensure optimal print quality.
- Store thermal paper in a cool, dry place away from direct sunlight and heat.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-printer ma jixgħelx. | Power cable not connected; power outlet faulty; printer switch off. | Iċċekkja l-konnessjoni tal-kejbil tal-enerġija; ipprova sokit differenti; kun żgur li s-swiċċ tal-enerġija jkun ON. |
| No printing / Blank output. | Paper loaded incorrectly (upside down); paper out; driver not installed/configured; printer not selected. | Reload paper correctly (printing side facing thermal head); replace paper roll; install/reinstall drivers; select printer in application. |
| Kwalità fqira tal-istampar. | Thermal head dirty; low-quality paper; paper stored improperly. | Clean thermal head; use recommended thermal paper; store paper correctly. |
| Ġamm tal-karta. | Paper not loaded straight; foreign object in paper path. | Open cover, remove jammed paper carefully, reload paper straight; inspect for obstructions. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | SPRT |
| Numru tal-Mudell | POS58 IVU |
| Tip ta 'stampatur | Printer Termali tal-Irċevuta |
| Teknoloġija tal-Konnettività | USB |
| Midja Stampata | Labels (commonly used for receipts) |
| Wisa' tal-Karta | 5.7 ċm |
| Kulur | Iswed |
| Piż tal-oġġett | 1.82 Kilogrammi |
| Dimensjonijiet tal-Pakkett | 28 x 21.4 x 17.8 ċm |
Garanzija u Appoġġ
Specific warranty terms and detailed support contact information are not provided within the available product data. For warranty claims, technical support, or service inquiries, please refer to the documentation included with your purchase or contact your point of sale or the manufacturer directly.
You may find additional resources and contact details on the official SPRT websit.
