Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your GREENCYCLE Wireless Motion Sensor Detector Alarm. Please read this manual thoroughly before use to ensure proper function and safety.
Informazzjoni dwar is-Sigurtà
- This device is designed for indoor use only. It is not waterproof.
- Żgura l-polarità korretta tal-batterija waqt l-installazzjoni.
- Żomm l-apparat 'il bogħod mix-xemx diretta, sorsi ta' sħana, u umdità.
- Tippruvax tiżżarma jew issewwi l-apparat int stess. Ikkuntattja l-appoġġ għall-klijenti jekk jinqalgħu xi problemi.
- Armi l-batteriji skont ir-regolamenti lokali.
Kontenut tal-Pakkett
- 1x Unità Riċevitur
- 1x Motion Detector (PIR Sensor)
- 1x Kontroll mill-bogħod
- Mounting Accessories (Screws, Sticky Paper, Bases)
- Manwal għall-Utent
Immaġni: Fuqview of the GREENCYCLE Wireless Motion Sensor Detector Alarm components, including the receiver, motion detector, remote control, and mounting accessories.
Prodott Overview
Unità Riċevitur
- Kelliem: Emits sounds for alerts and chimes.
- Dawl LED ikkulurit: Indicates different modes and alerts.
- Chime Key: Selects different melodies/tunes.
- Volume/Brightness Key: Adjusts volume levels or light brightness.
- Swiċċ mixgħul / mitfi: Jixgħel jew jitfi l-unità.
- Ċavetta tal-Modalità: Cycles through the 5 operating modes.
- Port Micro USB: Għal provvista ta 'enerġija USB.
- Qoxra tal-batterija: Houses 3x AA batteries (not included).
Immaġni: Dettaljata view of the receiver unit, highlighting the speaker, LED light, control keys, USB port, and battery cover.
Rilevatur tal-Moviment (Sensor PIR)
- Sensor infra-aħmar: Jiskopri mozzjoni.
- Indikatur LED: Lights up upon motion detection.
- Swiċċ mixgħul / mitfi: Powers the sensor on or off.
- Port tal-Iċċarġjar tal-USB: For power supply (optional).
- Kompartiment tal-batterija: Houses 3x AAA batteries (not included).
Immaġni: Dettaljata view of the motion detector, showing the infrared sensor, LED indicator, ON/OFF switch, and USB port.
Setup
1. Installazzjoni tal-batterija
- Open the battery cover on the back of the receiver unit.
- Daħħal 3 batteriji AA, waqt li tiżgura l-polarità korretta (+/-).
- Agħlaq l-għatu tal-batterija.
- Open the battery cover on the back of the motion detector.
- Insert 3x AAA batteries, ensuring correct polarity (+/-).
- Agħlaq l-għatu tal-batterija.
Nota: For optimal performance, use alkaline batteries. The receiver can also be powered via its Micro USB port.
Video: Demonstrates the process of installing batteries into both the receiver and the motion sensor units.
2. Immuntar tal-Unitajiet
Both the receiver and motion detector come with mounting bases that allow for 360-degree rotation horizontally and 180-degree rotation vertically. You can use the included screws or sticky paper for installation.
- Riċevitur: Place on a flat surface or mount to a wall using its base.
- Ditekter tal-Moviment: Mount in a location where it can effectively detect motion, such as near a door or pathway. Ensure the detection range (2-8 meters / 7-26 feet) covers the desired area.
Image: Illustrates the detection range and angle of the PIR motion sensor, showing its coverage area.
Video: Shows the 360-degree and 180-degree rotating adjustable features of the motion sensor's mounting base.
Istruzzjonijiet Operattivi
The GREENCYCLE Motion Sensor Detector Alarm offers 5 distinct operating modes:
- Modalità ta' Merħba: Plays a welcome message (5 language options).
- Modalità tal-Kanċell: Plays a chime (36 ringtones available).
- Mod ta 'allarm: Emits a loud alarm sound (up to 113dB).
- Modalità tad-Dawl tal-Kulur: Cycles through different colored lights silently.
- Modalità Dawl bil-Lejl: Provides a silent night light.
Image: Visual representation of the different operating modes: Doorbell, Night Light, Alarm, and Welcome Mode.
Modi li jinbidlu
Agħfas il- Ċavetta tal-Modalità on the receiver unit to cycle through the 5 available modes. The LED indicator will change color or pattern to reflect the selected mode.
Adjusting Volume/Brightness
In Welcome, Doorbell, or Alarm mode, press the Volume/Brightness Key to adjust the volume (4 levels). In Color Light or Night Light mode, this key adjusts the brightness (4 levels).
Selecting Ringtones/Welcome Languages
In Doorbell mode, press the Chime Key to cycle through the 36 available ringtones. In Welcome mode, this key cycles through the 5 welcome language options.
Video: Demonstrates how to switch between the 5 modes (Welcome, Doorbell, Alarm, Color Light, Night Light) on the receiver unit.
Istruzzjonijiet ta' Tqabbil
The motion sensor and receiver are typically pre-paired. If you need to pair additional sensors or remote controls, follow these steps:
Tqabbil ta' Kontroll mill-bogħod
- Ensure the receiver is powered off.
- Agħfas u żomm il- Volume/Brightness Key on the receiver for 3 seconds until you hear a 'DU' sound and the indicator light illuminates. Release the button. The receiver is now in pairing mode.
- Press any button on the remote control. The receiver will emit a 'DI' sound, indicating successful pairing.
Video: Guide on how to pair the GREENCYCLE Motion Sensor Alarm with a remote control.
Pairing an Additional Motion Sensor
- Ensure the receiver is powered off.
- Agħfas u żomm il- Volume/Brightness Key on the receiver for 3 seconds until you hear a 'DU' sound and the indicator light illuminates. Release the button. The receiver is now in pairing mode.
- Wave your hand in front of the motion sensor to activate it. The receiver will emit a 'DI' sound, indicating successful pairing.
Nota: Each receiver can work with up to 32 motion sensors and 8 remote controls. The doorbell uses distinct colored lights (red, green, blue) to differentiate between sensors, but does not support assigning unique chime sounds to each.
Video: Step-by-step instructions on how to pair the GREENCYCLE Motion Sensor Doorbell with a sensor.
Unpairing All Sensors/Remotes
- Ensure the receiver is powered off.
- Agħfas u żomm il- Volume/Brightness Key on the receiver for 10 seconds until you hear a 'di di di' sound. Release the button. All previously paired sensors and remote controls will be deleted.
Manutenzjoni
- Naddaf l-apparat regolarment b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
- Ibdel il-batteriji meta jidher l-indikatur ta' batterija baxxa jew meta l-prestazzjoni tal-apparat tiddegrada.
- Ensure the motion sensor lens is clear of dust and obstructions for accurate detection.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jirrispondix | Low or dead batteries; Device is off. | Ibdel il-batteriji; Ixgħel l-apparat. |
| Is-sensorju tal-moviment ma jindunax | Incorrect placement; Obstruction; Out of range. | Adjust sensor angle/location; Clear obstructions; Move closer to receiver. |
| No sound/light from receiver | Volume too low; Incorrect mode; Not paired. | Increase volume; Change mode; Re-pair the devices. |
| Il-kontroll mill-bogħod ma jaħdimx | Low battery in remote; Not paired. | Replace remote battery; Re-pair the remote. |
Speċifikazzjonijiet
- Ditta: GREENCYCLE
- Numru tal-Mudell: M-SF20R-1PK+RMT-1PK-25
- Medda bla fili: Up to 280m (918 feet) in open areas.
- Medda ta' Sejbien PIR: Approximately 2-8m (7-26 feet).
- Angolu tas-Sensor PIR: 100° (horizontal), 15° (vertical).
- Ringtones: 36 selectable tunes.
- Livelli tal-Volum: 4 adjustable levels (25-113dB).
- Modi Operattivi: Welcome, Doorbell, Alarm, Color Light, Night Light.
- Qawwa tar-riċevitur: 3x AA batteries or Micro USB.
- Motion Detector Power: 3x AAA batteries.
- Tip ta 'Immuntar: Surface (360° horizontal, 180° vertical adjustable).
Garanzija u Appoġġ
GREENCYCLE products are designed for reliability and performance. For any questions, technical support, or warranty claims, please contact GREENCYCLE customer service. Information regarding extended protection plans may also be available from your retailer.
Għal aktar assistenza, jekk jogħġbok żur l-uffiċjal GREENCYCLE Store on Amazon.
