Manwal tal-Utent tal-Imqassijiet tal-Ħaxix mingħajr Fili WORKPRO u t-Trimmer tal-Arbuxxelli

1. Introduzzjoni

Thank you for choosing the WORKPRO 7.2V Cordless Grass Shear & Shrubbery Trimmer. This versatile 2-in-1 tool is designed for efficient and convenient trimming of lawns, hedges, and garden edges. Its lightweight and cordless design makes it easy to handle for various gardening tasks.

X'inhu Inkluż:

• WORKPRO Cordless Grass Shear & Shrubbery Trimmer Main Unit
• Grass Shear Blade (4.17'' wide)
• Shrub Shear Blade (5.9'' long)
• Type-C Charging Cable (1M)
• Manwal tal-Operatur

Figure 1: Main unit with interchangeable blades and Type-C charging cable.

2. Informazzjoni Importanti dwar is-Sigurtà

WARNING: Always read and understand the entire operator's manual before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

• Żomm 'il bogħod mit-tfal.
• Wear appropriate personal protective equipment, including eye protection, when operating the trimmer.
• Ensure the dual lock safety mechanism is engaged when not in use and during blade changes.
• Żomm idejk u partijiet tal-ġisem 'il bogħod mix-xfafar waqt l-operazzjoni.
• Do not attempt to cut branches thicker than 7.95 mm (0.31 inches) with the hedge trimmer blade.
• Avoid hitting hard objects like stones or metal, as this can damage the blade and cause the tool to stop working.
• Only use the provided Type-C charging cable and a compatible 5V/2A power source.
• Store the trimmer and blades in a cool, dry place, away from direct sunlight and moisture.

3. Twaqqif u Ċarġ Inizjali

3.1 Attaching Blades:

The WORKPRO trimmer comes with two interchangeable blades: a grass shear blade and a shrub shear blade. To attach or change a blade:

1. Ensure the trimmer is turned off and the safety lock is engaged.
2. Neħħi l-għatu protettiv mix-xafra.
3. Locate the blade release button on the main unit (refer to Figure 2). Press and hold this button.
4. Align the chosen blade with the main unit's attachment point and push it firmly until it clicks into place.
5. Release the blade release button. Ensure the blade is securely fastened before use.

Figure 2: Components of the WORKPRO Cordless Grass Shear & Shrubbery Trimmer.

3.2 Ħlas Inizjali:

The trimmer is equipped with a 2000mAh lithium-ion battery. It may come with a partial charge, but it is recommended to fully charge it before first use.

• Connect the Type-C charging cable to the charging socket on the trimmer (refer to Figure 2).
• Plug the other end of the Type-C cable into a compatible 5V/2A power source (e.g., mobile phone charger, laptop/PC, car charger, power bank USB port).
• The Charger LED Indicator will illuminate during charging. A full charge typically takes 2-3 hours.

Figure 3: USB-C Charging Convenience.

4. Istruzzjonijiet Operattivi

4.1 Starting the Trimmer:

The trimmer features a dual lock safety design to prevent accidental activation.

1. Push the safety lock-off button (located at the top of the handle, refer to Figure 2).
2. While holding the safety lock-off button, press and hold the ON/OFF switch (trigger) to start the trimmer.
3. You can release the safety lock-off button after the machine starts; continue to hold the ON/OFF switch for continuous operation.

Figure 4: Ergonomic Safety Lock for Easy Control and Handling.

4.2 Using the Grass Shear Blade:

The grass shear blade is ideal for trimming grass around edges, pathways, and small areas where a lawnmower cannot reach. It provides a maximum cutting width of 4.17 inches (106mm).

Figure 5: Grass Shear Mode in action.

4.3 Using the Shrub Shear Blade:

The shrub shear blade is perfect for shaping hedges, small shrubs, and trimming twigs. It offers a maximum cutting length of 5.9 inches (150mm) and can cut branches up to 0.31 inches (7.95mm) thick.

Figure 6: Hedge Trimmer Mode in action.

4.4 Vidjo Uffiċjali tal-Prodott:

5. Manutenzjoni

• Tindif tax-xafra: After each use, clean the blades thoroughly to remove any sap, debris, or grass clippings. Use a damp cloth and mild soap if necessary. Ensure blades are completely dry before storage to prevent rust.
• Lubrikazzjoni tax-xafra: Periodically apply a light coat of machine oil to the blades to ensure smooth operation and prevent corrosion.
• Ħażna: Store the trimmer and its blades in a cool, dry place, away from direct sunlight and moisture. Always use the protective blade covers when storing.
• Kura tal-batterija: If the trimmer is not used often, recharge the battery every 3-6 months to prolong its lifespan. Avoid fully discharging the battery for extended periods.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

• Ditta: XOGĦOL PRO
• Numru tal-Mudell: W159029A
• Sors tal-Enerġija: Mħaddma bil-batterija
• Tip ta 'batterija: 1 batterija tal-jone tal-litju (inkluża)
• Kapaċità tal-batterija: 2000mAh
• Ħin tal-Iċċarġjar: Madwar 2-3 sigħat
• Veloċità mingħajr Tagħbija: 1100 RPM
• Piż tal-oġġett: 0.82 lbs (main unit) / 1.04 pounds (overall)
• Dimensjonijiet tal-Prodott: 10.24"T x 2.36"W x 4.13"Għ
• Materjal tax-xafra: Azzar b'Karbonju Għoli jew Azzar Inossidabbli
• Grass Shear Cutting Width: 4.17-il pulzier (106mm)
• Tul tax-Xafra tat-Trimmer tal-Ħeġġa: 5.9-il pulzier (150mm)
• Hedge Trimmer Max Cutting Thickness: 0.31-il pulzier (7.95mm)
• Kulur: Aħdar

8. Garanzija u Appoġġ

For detailed warranty information, please refer to the official product documentation included with your purchase. WORKPRO offers various protection plans for extended coverage.

If you encounter any issues or have questions regarding your WORKPRO Cordless Grass Shear & Shrubbery Trimmer, please contact WORKPRO customer support. You can also refer to the full User Manual PDF for more comprehensive details:

Niżżel il-Manwal Sħiħ tal-Utent (PDF)