Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser SmartCode 10 Touchscreen Electronic Deadbolt with Z-Wave Technology. This smart lock is designed to offer enhanced security and convenience for your home. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the benefits of your new deadbolt.
Quddiem view of the Weiser SmartCode 10 Touchscreen Electronic Deadbolt in Satin Nickel finish.
Setup u Installazzjoni
The Weiser SmartCode 10 deadbolt is designed for easy installation. Ensure you have all included components before beginning.
Komponenti Inklużi:
- Lukkett
- Strike Plate
- Ċirku tal-Adapter
- Ċwievet
- Għodda SmartKey
- Ħardwer tal-immuntar
- Lock Assembly (Exterior and Interior)
Passi ta' Installazzjoni:
- Ipprepara l-Bieb: Ensure your door is properly prepped for a standard deadbolt installation.
- Installa l-lukkett: Daħħal il-lukkett fit-tarf tal-bieb u waħħalha bil-viti.
- Installa l-Assemblea Esterna: Route the cable through the door and position the exterior keypad assembly.
- Installa l-Assemblea Intern: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the door using the provided mounting hardware.
- Installa Batteriji: The lock requires batteries (not included). Insert 4 AA alkaline batteries into the battery pack located in the interior assembly.
- Wettaq il-Proċess tal-Immaniġġjar tal-Bieb: After battery installation, the lock will automatically determine door handing. This is crucial for proper operation.
The SmartCode 10 deadbolt seamlessly integrated into a residential door.
Programmazzjoni Inizjali:
- Master Code Creation: It is highly recommended to create a Master Code immediately after installation for enhanced security and to enable programming of user codes.
- Adding User Codes: The lock supports up to 30 customizable user codes. Refer to the full programming guide for detailed steps on adding, deleting, and modifying user codes.
Operating the Deadbolt
Your SmartCode 10 deadbolt offers multiple ways to secure and access your home.
Keyless Entry via Touchscreen:
- Biex Nisfruttaw: Touch the screen with your palm or fingers to activate the keypad. Enter your 4-8 digit user code. The deadbolt will retract.
- SecureScreen Technology: This feature displays random digits before you enter your code, preventing fingerprint analysis on the touchscreen and enhancing security.
A user interacting with the capacitive touchscreen to enter an access code.
Qfil tal-Bieb:
- Qfil One-Touch: Press the Lock button (padlock icon) on the keypad. The deadbolt will extend.
- Karatteristika Auto-Lock: The deadbolt can be programmed to automatically lock 30 seconds after unlocking. This feature can be enabled or disabled through programming.
SmartKey Re-Key Technology:
This feature allows you to re-key your lock to a new key in seconds, providing flexibility and control over your home's security. This is useful if you lose a key or want to match your new deadbolt to an existing key from another Weiser lock.
- Insert your functioning key and turn it 90 degrees clockwise.
- Insert the SmartKey tool fully and firmly into the SmartKey hole.
- Neħħi l-għodda SmartKey u ċ-ċavetta li taħdem.
- Insert your new key fully and slowly turn it 180 degrees counter-clockwise.
Diagram illustrating the SmartKey Re-Key process and various security features like pick, bump, and drill resistance.
Integrazzjoni ta' Dar Intelliġenti (Z-Wave):
The SmartCode 10 with Z-Wave technology can be integrated into compatible smart home systems like Samsung SmartThings and Wink. This allows for remote access, voice control via Amazon Alexa (through a compatible hub), and inclusion in smart home routines. Refer to your smart home hub's instructions for pairing the deadbolt.
Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your Weiser SmartCode 10 deadbolt.
Tindif:
Naddaf it-touchscreen u l-finitura ta' barra b'drapp artab u nadif.amp drapp. Evita prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura u lill-komponenti elettroniċi.
Sostituzzjoni tal-batterija:
When the batteries are low, the lock will provide an audible alert (beeps) and/or a visual indicator (flashing light) during operation. Replace all four AA alkaline batteries promptly to avoid loss of functionality. Always use new, high-quality alkaline batteries.
Kura Ġenerali:
Ensure the door and frame are properly aligned and the deadbolt operates smoothly without resistance. Misalignment can put undue stress on the lock mechanism.
Issolvi l-problemi
If you encounter issues with your SmartCode 10 deadbolt, refer to the common problems and solutions below.
Kwistjonijiet Komuni u Soluzzjonijiet:
- Lock not responding to keypad:
- Check batteries. Replace if low or dead.
- Ensure the touchscreen is clean and free of debris.
- Verify that the door handing process was completed correctly during installation.
- Il-kodiċi tal-utent mhux qed jaħdem:
- Ensure the code is entered correctly and completely.
- Verify the user code is still active and has not been deleted.
- Confirm the Master Code is set up correctly.
- Il-bolt mhux qed jestendi/jirtira kompletament:
- Check for any obstructions in the door frame or strike plate.
- Ensure the door is properly aligned and not warped.
- Verify the latch and strike plate are installed correctly and aligned.
- Z-Wave connectivity issues:
- Ensure the lock is within range of your Z-Wave hub.
- Check your Z-Wave hub's status and network.
- Attempt to re-pair the lock with your Z-Wave hub according to your hub's instructions.
Irrisettjar tal-Fabbrika:
If issues persist, a factory reset may be necessary. This will erase all user codes and settings. Refer to the detailed programming guide for your specific model for factory reset instructions.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 9GED21500-018 |
| Brand | Weiser |
| Dimensjonijiet tal-Prodott | 13.67 x 8.89 x 25.1 ċm |
| Piż tal-oġġett | 1.42 kg |
| Kulur | Nikil Satin |
| Materjal | Metall |
| Tip Lock | Deadbolt, Tastiera |
| Karatteristiċi Speċjali | Auto-Lock, One-Touch Lock, Passcode Unlock, Touchscreen, Weather Resistant |
| Batteriji Meħtieġa | Iva (4 AA Alkalini) |
| Kompatibilità tad-Dar Intelliġenti | Z-Wave (e.g., Samsung SmartThings, Wink, Alexa via hub) |
| Ċertifikazzjoni tas-Sigurtà | ANSI/BHMA Grade 2 certified, 128-bit encryption, 20-minute fire rating (UL certified) |
Garanzija u Appoġġ
Informazzjoni dwar il-garanzija:
The Weiser SmartCode 10 Touchscreen Electronic Deadbolt comes with a Garanzija limitata tul il-ħajja. This warranty covers mechanical and finish defects for the lifetime of the product to the original residential user. Electronic components are typically covered for a specific period (details usually found in the full warranty statement). Please retain your proof of purchase.
Appoġġ għall-Klijent:
For technical assistance, warranty claims, or further information, please visit the official Weiser website or contact their customer support. Contact details are typically available on the product packaging or the manufacturer's websit.
